CSPR-N30ATG4-A0R

CHINA SEMICONDUCTOR CORPORATION Spec. No. PS-LU-N30ATG4-A0R A Rev. PRODUCT SPECIFICATION CUSTOMER APPROVED SIGNATURES APPROVED BY CHINA SEMICONDUCTOR CORPORATION Address:2FL. NO.909,Chung-Cheng Road, Chung-Ho City Taipei Hsien,Taiwan. Tel:886-2-2223-9696 Fax:886-2-2223-9377 http://www.csctw.com.tw ： ： LED Type : LED Package : Emitting Color Viewing Angle Stopper ： ： ： ： Model No CSPR-N30ATG4-A0R Descriptions: Superbright Lamp Piranha LED Lamp Green 60° ■ ■ ■ ■ ■ CHECKED BY PREPARED BY OPTO PLUS TECHNOLOGIES CO.,LTD Address:696 Shun jiang Rd.,Ji Shan St.Shaoxing, ZheJiang,China Tel:86-0575-88623888 Fax:86-0575-88623112 CHINA SEMICONDUCTOR CORPORATION Spec. No. PS-LU-N30ATG4-A0R A Rev. Features 1. High Current Operation 2. High Luminous Output 3. High Reliability and Solid Performance 4. Optimal Optical/Mechanical Design 5. Packaged in Tubes for Use with Automatic Pick and Place Equipment 6. Rohs Compliant Device Selection Guide Chip Package Outline Dimensions - ： ： ： Tolerance ： ： ： ： Model No CSPR-N30ATG4-A0R ＊ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Part No. Material CSPR-N30ATG4-A0R LED Lens Emitted Color Green Water Transparent InGaN ± 0.25 0.01 Unit ± inch mm http://www.csctw.com.tw Page 1/5 CHINA SEMICONDUCTOR CORPORATION Spec. No. PS-LU-N30ATG4-A0R Rev. A Absolute Maximum Rating - Parameter Power Dissipation Forward Current (DC) Peak Forward Current * Reverse Voltage Operating Temp. Storage Temp. Symbol Pd IF IFP VR Topr Tstg Tsol 1/10 Rating 190 50 100 5 -30 ~ +80 -40 ~ +100 Unit mW mA mA V Lead Soldering Temperature Max. 260 for 5 sec Max. (3mm from the epoxy bulb) Electro-optical Characteristics - Parameter Forward Voltage Luminous Intensity Luminous Flux Dominant Wavelength Symbol VF IV Φv d p 1/2 Min. ----3000 3000 ----------------- Typ. 3.3 6300 4500 525 515 60 ----- Max. 3.8 ---------------------100 Unit V mcd mlm Condition IF=50mA nm nm deg A VR=5V Peak Wavelength Viewing Angle Reverse Current 2 ： http://www.csctw.com.tw μ IR Page ℃ ≦ θ θ θ θ λ λ λ λ λ λ λ λ ≦ * Pulse width 0.1 msec. duty ℃ ℃ ℃ ℃ ℃ ℃ ℃ ： ： ： ： Model No CSPR-N30ATG4-A0R ■ ■ ■ ■ ■ ■ ■ ■ (Ta=25 ) (Ta=25 ) 2/5 CHINA SEMICONDUCTOR CORPORATION Luminous Flux Rank Limits ( IF = 50mA ) unit mlm Part No.CSPR-N30ATG4-A0R Code Spec. No. PS-LU-N30ATG4-A0R A Rev. F G H J K min. 3000 3500 4000 5000 6000 Dominant Wavelength Rank Limits ( IF = 50mA ) Part No. CSPR-N30ATG4-A0R Code min. max. TG1 TG2 TG3 TG4 515 520 525 530 Forward Voltage Rank Limits ( IF = 50mA ) unit v Part No. CSPR-N30ATG4-A0R Code min. 2.8 3.0 3.2 3.4 3.6 max. 3.0 3.2 3.4 3.6 3.8 H J K L M Notes: ： http://www.csctw.com.tw ％ 1. 2. 3. 4. 5. 6. 7. Tolerance of measurement of luminous Flux :±15 Tolerance of measurement of dominant wavelength :±2nm Tolerance of measurement of forward voltage :±0.05v All data are measured by CSC's test equipment. One delivery will include several color rank, VF rank and Iv ranks of the products. The quantity-ratio of the ranks is decided by CSC. Please confirm with CSC salesman,if your request different form standard specification. ： ： unit ： ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ max. 3500 4000 5000 6000 7000 nm 520 525 530 535 Page 3/5 CHINA SEMICONDUCTOR CORPORATION Spec. No. PS-LU-N30ATG4-A0R Rev. A Typical Electrical / Optical Charateristics Curves 40 Forward Current (mA DC) Forward Current (mA DC) 30 20 10 150 125 100 75 50 25 0 5 10 15 20 25 30 Forward Current (mA) Relative Intensity (%) Forward Current I F (mA DC) Fig 3. Relative Intensity V Forward Current Vs. s. Forward Current Relative Intensity (%) 100 75 50 25 0 500 510 520 530 540 550 560 Wavelength (nm) Fig 5. Relative Intensity Vs. Wavelength Fig 6. Relative Luminous Intensity vs.Radiation Angle ： http://www.csctw.com.tw elgnA noitaidaR ---- -------- -- -----------R 0l e a t i v e L u 5.0 i m n o s i t y 1 ℃ ℃ ℃ ℃ 0 (Ta = 25 ： ： ： ： Model No CSPR-N30ATG4-A0R ■ ■ ■ ■ Unless Otherwise Noted) 30 25 20 15 10 5 0 25 50 75 100 1 2 3 4 Ambient Temperature Ta (°C) Forward Voltage V F (V) Fig 1. Forward Current Vs. Ambient Temperature Vs. Ambient Temperature 100 75 50 25 Fig 2.Fig 2. Forward Current Forward Current Vs. Forward Voltage 0 1 2 3 4 5 6 Forward Voltage (V) Fig 4. Fig 4. Peark Forward Voltage Peark Forward Voltage Vs.Forward Current Vs.Forward Current (100us test pulse,1% duty cycle) Page 4/5 CHINA SEMICONDUCTOR CORPORATION Spec. No. PS-LU-N30ATG4-A0R A Rev. Precautions For Use 1. Recommended Soldering conditions Wave Soldering Temperature(°C) , and temperature should be controllable. Surface temperature of the device should 3. Static Electricity a. Static electricity or surge voltage damages LEDs.. It is recommended that a wrist band or an anit-electrostatic glove be used when handling the LEDs. b. All devices, equipment and machinery must be properly grounded. It is recommended that mesures be taken against surge voltage to the equipment that mounts the LEDs. Note: The specifications are subject to change without notice. Please contact us for updated information. ： ℃ be under 230 . →℃ be shorter (+10 -1sec.). Power dissipation of iron should be smaller than 15W http://www.csctw.com.tw ℃ ≦ ： ： ： ： Model No CSPR-N30ATG4-A0R ■ ■ ■ ■ 260(max.) 250 240 Preheat 105(max.) 0 Max. 60sec. Time(sec.) 5 sec. 2. Soldering Iron Basic SPEC. is 5sec. When 260 . If temperature is higher, time should Page 5/5