WM2002
w
Stereo Headphone Driver with Wolfson
Ambient Noise Cancellation
DESCRIPTION
FEATURES
The WM2002 is a low power, high quality stereo headphone
driver, delivering Wolfson’s patented ambient noise cancellation.
The WM2002 supports analogue playback or voice input, and
analogue microphones for noise cancellation.
Wolfson Ambient Noise Cancellation (ANC)
- >30dB (peak), 25dB (typical) ambient noise reduction*
- Wide noise cancellation bandwidth (40Hz to 4kHz)*
- * depending on acoustic configuration
- Up to 3 banks of ANC coefficients can be programmed to
support different operating conditions
Audio inputs
- Up to 10 analogue noise cancellation microphones
- 2 single-ended or 1 differential line input per channel
Headphone driver (LDO4VOUT = 1.8V)
- 45mW per channel into 16 load
- 22mW per channel into 32 load
- Single-ended or differential (BTL) drive configuration
- -82dB THD+N for differential (BTL) drive
Integration
- On-chip DC-DC boost converter, charge-pump and LDOs
- Flexible power supply options, including single cell battery
(1 x AAA battery)
- Internal crystal oscillator
Miscellaneous
- Monitor pin to select mute / talk-through modes
- LED driver
- Tone generator for audible status indication
- Pop and click noise protection circuit
- RFI suppression
- 48-pin QFN package (7 x 7 x 0.75mm, 0.5mm pitch)
Designed for incorporation within a stand-alone headset or
headphone, the Wolfson ANC noise cancellation engine
performs ambient noise cancellation during a voice call or during
music playback.
The WM2002 provides integrated power management,
comprising a DC-DC converter, Charge Pump and LDO
Regulators. Different power supply configurations can be
supported, including operation from a single cell AAA or AA
battery, and other configurations using externally regulated
supplies.
System clocking is achieved using a crystal-controlled on-chip
oscillator. An external clock can be connected directly, if
available.
The WM2002 is configured using programmable settings stored
in an integrated non-volatile memory. The configuration stored in
the OTP memory is enabled automatically at start-up. If
required, the WM2002 can also be configured using register
control accessed using a 2-wire serial control interface.
APPLICATIONS
WOLFSON MICROELECTRONICS plc
“Pod-style” stereo ear-buds, headsets, headphones with
ANC
“Supra-Aural” stereo headphones with ANC
Mono/Stereo Bluetooth headsets with ANC
Product Brief, September 2013, Rev 4.1
Copyright 2013 Wolfson Microelectronics plc
WM2002
Product Brief
BLOCK DIAGRAM
w
Product Brief, September 2013, Rev 4.1
2
WM2002
Product Brief
PIN CONFIGURATION
ORDERING INFORMATION
DEVICE
TEMPERATURE
RANGE
WM2002GEFL/V
-40 C to +85 C
WM2002GEFL/RV
-40 C to +85 C
o
o
o
o
MOISTURE
PACKAGE
SENSITIVITY
LEVEL
PEAK SOLDERING
TEMPERATURE
48-pin QFN
(Pb-free)
MSL3
260 C
48-pin QFN
(Pb-free, tape and reel)
MSL3
260 C
o
o
Note:
Reel quantity = 2,200
w
Product Brief, September 2013, Rev 4.1
3
WM2002
Product Brief
PIN DESCRIPTION
A description of each pin on the WM2002 is provided below.
Note that, where multiple pins share a common name (eg. DGND), these pins should be tied together on the PCB.
PIN
NAME
TYPE
DESCRIPTION
1
LED
Analogue Output
Status LED output
2
DGND
Supply
Digital supplies ground
3
MON
Digital Input
Digital control input (changes ANC filter characteristics, selects mute
or talk-through mode)
4
ADDR
Digital Input
Control interface address select
5
SDA
Digital Input/Output
Control interface data input / output
6
SCLK
Digital Input
Control interface clock input
7
LDO1VDD
Supply
LDO1 supply input
8
LDO1VOUT
Analogue Output /
Supply
LDO1 output / Digital core supply
9
MICVDD
Supply
MICBIAS supply input
10
MICBIAS
Analogue Output
Bias supply for external microphones
11
LDO3VOUT
Analogue Output /
Supply
LDO3 output / Analogue supply
12
AGND
Supply
Analogue supplies ground
13
MICLN
Analogue Input
Left channel inverting analogue noise cancelling mic input
14
MICLP
Analogue Input
Left channel non-inverting analogue noise cancelling mic input
15
MICRP
Analogue Input
Right channel non-inverting analogue noise cancelling mic input
16
MICRN
Analogue Input
Right channel inverting analogue noise cancelling mic input
17
INLP
Analogue Input
Left channel non-inverting differential line input
18
INLN
Analogue Input
Left channel inverting differential line input
(can be grounded for single-ended operation)
19
INRN
Analogue Input
Right channel inverting differential line input
(can be grounded for single-ended operation)
20
INRP
Analogue Input
Right channel non-inverting differential line input
21
VMIDC
Analogue I/O
Midrail voltage capacitor connection point
22
LDO4VOUT
Analogue Output /
Supply
LDO4 output / Headphone driver supply
23
HPOUTLP
Analogue Output
Left headphone non-inverting output
24
HPOUTLN
Analogue Output
Left headphone inverting output
25
HPGND
Supply
Headphone driver ground
26
HPOUTRN
Analogue Output
Right headphone inverting output
27
HPOUTRP
Analogue Output
Right headphone non-inverting output
28
CPVOUT
Analogue Output
Charge pump output
29
BATTVDD
Supply
DC1 boost converter supply input / Battery supply
30
CFB2
Analogue I/O
Charge pump flyback capacitor connection
31
CFB1
Analogue I/O
Charge pump flyback capacitor connection
32
CPGND
Supply
Charge pump ground
33
DC1LX
Analogue I/O
DC1 boost converter inductor connection pin
34
DC1VOUT
Analogue Output
DC1 boost converter output
35
SYSVDD
Supply
System supply input
36
XTO
Analogue Output
Crystal drive output
37
XTI
Analogue Input
Crystal drive input or CMOS clock input
38
DGND
Supply
Digital supplies ground
39
PROGVDD
Supply
OTP Memory programming supply - normally tied to DGND
40
LDO2VOUT
Analogue Output /
Supply
LDO2 output / OTP memory supply
41
VREFC
Analogue I/O
Voltage reference capacitor connection
w
Product Brief, September 2013, Rev 4.1
4
WM2002
Product Brief
PIN
NAME
TYPE
DESCRIPTION
42
IREFR
Analogue
Input/Output
Current reference resistor connection
43
DBVDD
Supply
Digital buffer supply
44
DNC
n/a
Do Not Connect
45
DGND
Supply
Digital supplies ground
46
DGND
Supply
Digital supplies ground
47
DGND
Supply
Digital supplies ground
48
DGND
Supply
Digital supplies ground
ABSOLUTE MAXIMUM RATINGS
Absolute Maximum Ratings are stress ratings only. Permanent damage to the device may be caused by continuously
operating at or beyond these limits. Device functional operating limits and guaranteed performance specifications are
given under Electrical Characteristics at the test conditions specified.
ESD Sensitive Device. This device is manufactured on a CMOS process. It is therefore generically
susceptible to damage from excessive static voltages. Proper ESD precautions must be taken
during handling and storage of this device.
Wolfson tests its package types according to IPC/JEDEC J-STD-020 for Moisture Sensitivity to determine acceptable
storage conditions prior to surface mount assembly. These levels are:
MSL1 = unlimited floor life at
很抱歉,暂时无法提供与“WM2002GEFL”相匹配的价格&库存,您可以联系我们找货
免费人工找货