A11ASP6VDC1.2D

RoHS Compliant 22.8 x 15.3 x 25.8 mm A1 Features • • • • • Switching capacity up to 25A Small size and light weight PCB pin and quick connect mounting available Suitable for automobile and lamp accessories QS-9000, ISO-9002 Certified Manufacturing Contact Data Contact Arrangement Contact Rating 1A = SPST N.O. 1C = SPDT Specifications and availability subject to change without notice. Contact Resistance Contact Material Maximum Switching Power Maximum Switching Voltage Maximum Switching Current < 50 milliohms initial AgSnO2 350W 75VDC 25A 1A : 25A @ 14VDC 1C : 20A @ 14VDC Coil Data Coil Voltage VDC Rated 6 12 24 48 Max 7.8 15.6 31.2 62.4 Coil Resistance Ω +/- 10% 1.2W 30 120 480 1920 1.5W 24 96 384 1536 Pick Up Voltage Release Voltage VDC (max) VDC (min) 70% of rated voltage 4.20 8.40 18.00 33.60 10% of rated voltage .6 1.2 2.4 4.8 1.20 or 1.50 10 7 Coil Power W Operate Time ms Release Time ms General Data Dimensions shown in mm. Dimensions are shown for reference purposes only. Electrical Life @ rated load Mechanical Life Insulation Resistance Dielectric Strength, Coil to Contact Contact to Contact Shock Resistance Vibration Resistance Terminal (Copper Alloy) Strength Operating Temperature Storage Temperature Solderability Weight 100K cycles, typical 10M cycles, typical 100M Ω min. @ 500VDC 2500V rms min. @ sea level 1500V rms min. @ sea level 100m/s2 for 11 ms 1.27mm double amplitude 10~40Hz 8N (Quick Connect), 4N (PCB pins) -40oC to +85oC -40oC to +155oC 260oC for 5 s 18.5g Caution 1. The use of any coil voltage less than the rated coil voltage may compromise the operation of the relay. www.citrelay.com phone - 763.535.2339 fax - 763.535.2194 A1 Ordering Information 1. Series A1 2. Contact Arrangement 1A = SPST N.O. 1C = SPDT 3. Sealing Option S = Sealed 4. Termination P = PCB Pins Q = Quick Connect 5. Coil Voltage 6VDC 12VDC 24VDC 48VDC 6. Coil Power 1.2 = 1.2W 1.5 = 1.5W 7. Coil Suppression Blank = Standard D = Diode (1N4005) R = Resistor (680 ohms) ** Consult factory if other values are needed A1 1A S Q 12VDC 1.2 Dimensions shown in mm. Dimensions are shown for reference purposes only. Dimensions Units = mm PC Pin Dimensions Units = mm Specifications and availability subject to change without notice. Schematics & PC Layouts Bottom Views 1A www.citrelay.com phone - 763.535.2339 fax - 763.535.2194 1C