A1M1ASP24VDCD

RoHS Compliant 20.0 x 15.2 x 22.0 mm A1M Features • • • • • Switching capacity up to 20A Small size and light weight PCB pin and quick connect mounting available Suitable for automobile and lamp accessories QS-9000, ISO-9002 Certified Manufacturing Contact Data Contact Arrangement Specifications and availability subject to change without notice. 1A = SPST N.O. 1B = SPST N.C. 1A : 20A @ 14VDC 1B : 15A @ 14VDC Contact Resistance Contact Material Maximum Switching Power Maximum Switching Voltage Maximum Switching Current < 50 milliohms initial AgSnO2 280W 75VDC 30A Contact Rating Coil Data Coil Voltage VDC Rated 12 24 Max 15.6 31.2 124 489 Coil Resistance Ω +/- 10% Pick Up Voltage Release Voltage VDC (max) VDC (min) 70% of rated voltage 8.40 16.80 10% of rated voltage 1.2 2.4 1.16 10 7 Coil Power W Operate Time ms Release Time ms General Data Dimensions shown in mm. Dimensions are shown for reference purposes only. Electrical Life @ rated load Mechanical Life Insulation Resistance Dielectric Strength, Coil to Contact Contact to Contact Shock Resistance Vibration Resistance Terminal (Copper Alloy) Strength Operating Temperature Storage Temperature Solderability Weight 100K cycles, typical 10M cycles, typical 100M Ω min. @ 500VDC 1500V rms min. @ sea level 1000V rms min. @ sea level 100m/s2 for 11 ms 1.27mm double amplitude 10~40Hz 10N (quick connect), 4N (PCB pins) -40oC to +85oC -40oC to +155oC 260oC for 5 s 14g Caution 1. The use of any coil voltage less than the rated coil voltage may compromise the operation of the relay. www.citrelay.com phone - 763.535.2339 fax - 763.535.2194 A1M Ordering Information 1. Series A1M 2. Contact Arrangement 1A = SPST N.O. 1B = SPST N.C. 3. Sealing Option S = Sealed C = Dust Cover 4. Termination P = PCB Pins Q = Quick Connect 5. Coil Voltage 12VDC 24VDC 6. Coil Suppression Blank = Standard D = Diode (1N4005) R = Resistor (680 ohms) ** Consult factory if other values are needed Dimensions shown in mm. Dimensions are shown for reference purposes only. A1M 1A S P 12VDC Dimensions Units = mm PC Pin Dimensions Units = mm Specifications and availability subject to change without notice. Schematics & PC Layouts Bottom Views 1A www.citrelay.com phone - 763.535.2339 fax - 763.535.2194 1B