BNP10SA5G

BNP SPECIFICATIONS Electrical Ratings Electrical Life Contact Resistance Dielectric Strength Insulation Resistance Operating Temperature Storage Temperature 3A @ 120VAC, 28VDC; 1A @ 250VAC See Contact Options 50,000 cycles typical < 20 mΩ max initial @ 2-4VDC, 100mA 1500Vrms min > 100MΩ min -40°C to 85°C -40°C to 85°C MATERIALS ←RoHS COMPLIANT Actuator Housing Cover Bushing Contacts Terminals Thermoplastic Polyester DAP – Diallyl Phthalate Stainless Steel Brass, Nickel Plated Copper Alloy, Silver Plated Brass, Silver Plated - E222871 ORDERING INFORMATION Series: BNP 1 1 S C BNP Number of Poles: 1 = Single Pole Switch Function: 0 = OFF - (ON) **SPST 1 = ON - (ON) ** SPDT0 Bushing: Blank = Panel Mount Frame S / U = 5.59mm, 10-48UNS / Non-Threaded, Flat T = 5.59mm, Non-Threaded, Round V / V1 = 7.87mm, ¼-40NS / Non-Threaded, Flat S9 = 3.20mm, Actuator Only Terminals: B = Solder Lug C = PC Pin H = Horizontal Mount, Right Angle PC Pin; HS = Snap-in V = Vertical Mount, Right Angle PC Pin; VS = Snap-in A5 = PC Pin with Support Bracket; A5S = Snap-in Support Bracket Contacts: Q = Silver Plated R = Gold Plated G = Gold over Silver Plated Epoxy Seal: E = Epoxy Seal Actuator Cap / Frame Colors: Cap / Frame Options: C84 ** See Cap Options for color availability C85 C87 **only used with V & V1 bushings F86 = Snap-in Panel Mount w/ Frame Q E www.citswitch.com page 184 phone – 763.535.2339 fax – 763.535.2194 BNP SWITCH FUNCTION Pushbutton Position Function SPST 0 Terminals OFF --- (ON) 1-3 Pushbutton Position Function SPDT 1 Terminals ON 2-1 ON 2-3 BUSHING OPTIONS S U T V V1 SP PANEL MOUNTING Used with S, U, & T Bushings Used with V & V1 Bushings TERMINAL OPTIONS B – SPST 3 B – SPDT page 185 C – SPST C – SPDT www.citswitch.com phone – 763.535.2339 fax – 763.535.2194 BNP TERMINAL OPTIONS H (HS – Snap-in) = Horizontal Mount, Right Angle PC Pins (SPST) H (HS – Snap-in) = Horizontal Mount, Right Angle PC Pins (SPDT) V (VS – Snap-in) = Vertical Mount, Right Angle PC Pins (SPST) V (VS – Snap-in) = Vertical Mount, Right Angle PC Pins (SPDT) www.citswitch.com page 186 phone – 763.535.2339 fax – 763.535.2194 BNP TERMINAL OPTIONS A5 (A5S – Snap-in Bracket) = PC Pins with Support Bracket (SPST) A5 (A5S – Snap-in Bracket) = PC Pins with Support Bracket (SPDT) CONTACT OPTIONS Designator Contact Material Q R G Silver Plating Gold over Nickel Plating Gold over Silver Plating Terminal Material Silver Plating Gold over Nickel Plating Gold over Silver Plating Electrical Ratings 3A @ 120VAC, 28VDC; 1A @ 250VAC .4 VA max @ 20VAC or VDC max .4 VA max @ 20VAC or VDC max or 3A @ 120VAC, 28VDC; 1A @ 250VAC FRAME OPTIONS F86_ _ ← (Insert Cap & Frame Colors Here) Cap Color / Frame Color: 1 = White, 2 = Black, 3 = Red **Contact factory for other available colors www.citswitch.com page 187 phone – 763.535.2339 fax – 763.535.2194 BNP CAP OPTIONS C84_ 1 = White, 2 = Black, 3 = Red Contact Factory for other available colors C85_ 1 = White, 2 = Black, 3 = Red Contact Factory for other available colors C87_ 1 = White, 2 = Black, 3 = Red Contact Factory for other available colors **Only for use with V & V1 Bushings HARDWARE **Two hex nuts, one lock washer, & one locking ring supplied standard with threaded bushings Hex Nut Lock Washer **For use with S Bushings Locking Ring Hex Nut Lock Washer Locking Ring Dress Nut Knurled Nut Knurled Nut **For use with V Bushings www.citswitch.com page 188 phone – 763.535.2339 fax – 763.535.2194