BNT23X

BNT SPECIFICATIONS Electrical Ratings Electrical Life Contact Resistance Dielectric Strength Insulation Resistance Operating Temperature Storage Temperature 3A @ 120VAC, 28VDC; 1A @ 250VAC See Contact Options 30,000 cycles typical < 20 mΩ max initial @ 2-4VDC, 100mA 1500Vrms min > 100MΩ min -40°C to 85°C -40°C to 85°C MATERIALS ←RoHS COMPLIANT Actuator Housing Cover Bushing Contacts Terminals Brass, Chrome Plated DAP – Diallyl Phthalate Stainless Steel Brass, Nickel Plated Copper Alloy, Silver or Gold Plated Brass, Silver or Gold Plated - E222871 ORDERING INFORMATION Series: BNT 2 1 BNT Number of Poles: 1 = SPDT 2 = DPDT Switch Function: 1 = ON-NONE-ON 2 = ON-NONE-(ON) 3 = ON-OFF-ON 4 = (ON)-OFF-(ON) ** Only available in SPDT 5 = ON-OFF-(ON) ** Only available in SPDT 6 = ON-ON-ON ** See Three Way Wiring Section for Details Actuator: T = 5.33mm, Std, available on E/E1/F/F1 Bushings U = 7.37mm, Std, available on E/E1/F/F1 Bushings S = 9.40mm, Std, available on E/E1/F/F1 Bushings X = 5.59mm, Std, available on G/G1/J/J1 Bushings V = 10.41mm, Std, available on G/G1/J/J1 Bushings Bushing: E / E1 = 5.59mm, 10-48UNS / Non-Threaded, Flat F / F1 = 5.59mm, 10-48UNS / Non-Threaded, Keyway J / J1 = 6.60mm, ¼-40NS / Non-Threaded, Keyway G / G1 = 7.87mm, ¼-40NS / Non-Threaded, Flat Terminals: B = Solder Lug C = PC Pin H = Horizontal Mount, Right Angle PC Pin; HS = Snap-in V = Vertical Mount, Right Angle PC Pin; VS = Snap-in A5 = PC Pin with Support Bracket; A5S = Snap-in Support Bracket Contacts: Q = Silver Plated R = Gold Plated G = Gold over Silver Plated Epoxy Seal: E = Epoxy Seal U E1 C Q E www.citswitch.com page 132 phone – 763.535.2339 fax – 763.535.2194 BNT SWITCH FUNCTION Toggle Position Function SPDT 1 2 3 4 5 Terminals ON ON ON (ON) ON 2-3 NONE NONE OFF OFF OFF ON (ON) ON (ON) (ON) 2-1 --- Toggle Position Function 1 2 3 DPDT Terminals ON ON ON 2-3 5-6 ON 2-3 5-6 NONE NONE OFF ON (ON) ON 2-1 5-4 ON 2-1 5-4 --ON 2-3 5-4 6 Terminals ACTUATOR OPTIONS S T **Only available with E, E1, F, & F1 Bushings U V X **Only available with G, G1, J, & J1 Bushings BUSHING OPTIONS E E1 F F1 Panel Mounting – 10- 48 G G1 J J1 page 133 Panel Mounting – ¼-40 www.citswitch.com phone – 763.535.2339 fax – 763.535.2194 BNT TERMINAL OPTIONS B – SPDT B – DPDT C – SPDT C – DPDT H (HS – Snap-in) = Horizontal Mount, Right Angle PC Pins (Single Pole) H (HS – Snap-in) = Horizontal Mount, Right Angle PC Pins (Double Pole) V (VS – Snap-in) = Vertical Mount, Right Angle PC Pins (Single Pole) V (VS – Snap-in) = Vertical Mount, Right Angle PC Pins (Double Pole) www.citswitch.com page 134 phone – 763.535.2339 fax – 763.535.2194 BNT TERMINAL OPTIONS A5 (A5S – Snap-in Bracket) PC Pins with Support Bracket (Single Pole) A5 (A5S – Snap-in Bracket) PC Pins with Support Bracket (Double Pole) CONTACT OPTIONS Designator Contact Material Q R G Silver Plating Gold over Nickel Plating Gold over Silver Plating Terminal Material Silver Plating Gold over Nickel Plating Gold over Silver Plating Electrical Ratings 3A @ 120VAC, 28VDC; 1A @ 250VAC .4 VA max @ 20VAC or VDC max .4 VA max @ 20VAC or VDC max or 3A @ 120VAC, 28VDC; 1A @ 250VAC THREE WAY WIRING DIAGRAM POSITION 1 POSITION 2 POSITION 3 www.citswitch.com page 135 phone – 763.535.2339 fax – 763.535.2194 BNT HARDWARE **Two hex nuts, one lock washer, & one locking ring supplied standard with threaded bushings Hex Nut Lock Washer Locking Ring Locking Ring **For use with E & F Bushings Hex Nut Lock Washer Locking Ring Locking Ring Dress Nut Knurled Nut Knurled Nut **For use with G & J Bushings www.citswitch.com page 136 phone – 763.535.2339 fax – 763.535.2194