CL1200VA125

CL1200 SPECIFICATIONS Electrical Ratings Electrical Life Contact Resistance Actuation Force Actuator Travel Dielectric Strength Insulation Resistance Operating Temperature Storage Temperature 50mA @ 48VDC 100,000 cycles typical < 50 mΩ initial 160 +/- 50gF .25 +/- .1mm 500Vrms min > 100MΩ min -40°C to 85°C -40°C to 85°C MATERIALS ←RoHS COMPLIANT Actuator Housing Cap Frame Contacts Terminals 6/6 Nylon (Through Hole); 9T Nylon (SMD) 6/6 Nylon (Through Hole); 6T Nylon (SMD) 6/6 Nylon (Through Hole); 6/6 Nylon 33% GF(SMD) 6/6 Nylon (Through Hole); 6/6 Nylon 33% GF(SMD) Stainless Steel, Silver Plated Brass, Silver Plated ORDERING INFORMATION 1. Series: CL1200 A 2 2 CL1200 CL1200V (Right angle) CL1200S (Surface Mount) 2. Cap Style: Blank = No Cap A = Square Cap A1 = Square Cap without LED hole B = Round Cap B1 = Round Cap without LED hole 3. Frame Color: **Frame not available with CL1200V C = No Frame 2 = Black 9 = Gray 4. Cap Color: Blank = No Cap 2 = Black 3 = Red 4 = Yellow 5 = Green 9 = Gray 5. First LED Color: **Super Bright LEDs Not Available in Bi-color N = No LED RS = Super Bright Red R = Red GS = Super Bright Green G = Green YS = Super Bright Yellow Y = Yellow B = Blue W = White O = Orange R G 6. Second LED Color: **For Bi-color LED Option Blank = No Second LED R = Red G = Green Y = Yellow B = Blue **White & Orange not available in bi-color www.citswitch.com page 1 phone – 763.535.2339 fax – 763.535.2194 CL1200 DIMENSIONS – NO FRAME & NO CAP CL1200 CL1200V - RIGHT ANGLE CL1200S – SURFACE MOUNT DIMENSIONS – CAP OPTIONS WITH NO FRAME, BY TERMINATION STYLE A – CAP A1 – CAP B - CAP B1 – CAP A – CAP A1 - CAP B – CAP B1 - CAP A – CAP A1 - CAP page 2 B – CAP B1 - CAP www.citswitch.com phone – 763.535.2339 fax – 763.535.2194 CL1200 DIMENSIONS – CAP OPTIONS WITH FRAME, BY TERMINATION STYLE A – CAP A1 – CAP B - CAP B1 – CAP A – CAP A1 - CAP B – CAP B1 - CAP SCHEMATICS & PC LAYOUTS SINGLE / DUAL COLOR LED THROUGH HOLE RIGHT ANGLE SMT LED SPECIFICATIONS LED Ratings R Reverse Voltage Forward Current (avg) Forward Current (peak) Reverse Current VR = 5V Power Dissipation Operating & Storage Temperature Forward Voltage (typ.), IF = 20mA Forward Voltage (max.), IF = 20mA Wavelength at Peak Emmission, IF = 20mA Spectral Line Half-Width, IF = 20mA Luminous Intensity, IF = 20mA Viewing Angle VR IF IFS IR PT TA VF VF λP ∆λ LI Θ 5 30 125 10 69 1.8 2.3 660 24 130 20 G 5 30 125 10 81 2.2 2.7 565 32 65 20 page 3 Y 5 30 125 10 78 2.1 2.6 585 37 45 20 B 5 30 125 10 120 3.5 4.0 460 40 200 20 Value W O 5 5 30 30 125 125 10 10 120 75 -40~ +85 3.5 2.0 4.0 2.5 N/A 610 N/A 35 60 50 165 20 Units RS 5 30 125 10 75 2.0 2.5 630 20 1120 20 GS 5 30 125 10 75 2.0 2.5 572 20 525 20 YS 5 30 125 10 75 2.0 2.5 590 20 1550 20 V mA mA µA mW °C V V nm nm mcd Deg www.citswitch.com phone – 763.535.2339 fax – 763.535.2194