WJ114FL1CS165VDC5.0

WJ114FL Distributor: Electro-Stock www.electrostock.com Tel: 630-682-1542 Fax: 630-682-1562 FEATURES: • Switching capacity 16A • Low profile 15.7mm • F Class insulation standard • UL/CUL certified E197852 29.0 x 12.6 x 15.7 mm CONTACT DATA Contact Arrangement 1A = SPST N.O. 1B = SPST N.C. 1C = SPDT 12A @ 250VAC/30VDC general purpose 16A @ 250VAC/30VDC general purpose < 50 milliohms initial AgSnO2 480W, 4000VA 440VAC, 110VDC 16A Contact Rating Contact Resistance Contact Material Maximum Switching Power Maximum Switching Voltage Maximum Switching Current COIL DATA Coil Voltage VDC Coil Resistance Ω ± 10% Pick Up Voltage VDC (max) 75% of rated voltage Release Voltage VDC (min) 10% of rated voltage Coil Power W Operate Time ms Release Time ms Rated Max. 5 6.5 62 3.75 0.5 6 7.8 90 4.50 0.6 9 11.7 202 6.75 0.9 .41 12 15.6 360 9.00 1.2 10 24 31.2 1440 18.00 2.4 48 62.4 5760 36.00 3.6 60 78.0 7500 45.00 4.5 .48 110 143.0 25200 82.50 8.25 CAUTION: 1. The use of any coil voltage less than the rated coil voltage may compromise the operation of the relay. 2. Pickup and release voltages are for test purposes only and are not to be used as design criteria. 5 GENERAL DATA Electrical Life @ rated load Mechanical Life Insulation Resistance Dielectric Strength, Coil to Contact Contact to Contact Shock Resistance Vibration Resistance Terminal (Copper Alloy) Strength Operating Temperature Storage Temperature Solderability Weight 100K cycles, typical 10M cycles, typical 1000MΩ min @ 500VDC 5000V rms min. @ sea level 1000V rms min. @ sea level 500m/s2 for 11ms 1.50mm double amplitude 10-40Hz 5N -40 °C to + 125 °C -40 °C to + 155 °C 230 °C ± 2 °C for 10 ± 0.5s 13.5g WJ114FL Distributor: Electro-Stock www.electrostock.com Tel: 630-682-1542 Fax: 630-682-1562 ORDERING INFORMATION 1. Series: WJ114FL WJ114FL 2.Contact Arrangement: 1A = SPST N.O. 1B = SPDT N.C. 1C = SPDT 3. Sealing Options: S = Sealed 4. Contact Rating: 12 = 12A 16 = 16A 5. Coil Voltage: 5VDC 6VDC 9VDC 12VDC 24VDC 48VDC 60VDC 110VDC 6. Terminal Spacing: 3.5 = 3.5mm 5.0 = 5.0mm **Standard for 16A version 1C S 16 12VDC 5.0 DIMENSIONS (Units = mm) SCHEMATICS & PC LAYOUTS (BOTTOM VIEWS) 1A (12A) 1B (12A) 1C (12A) 1A (16A) 1B (16A) 1C (16A)