CIM-51S12RV

CIM-51S12RV ●電気的光学的特性/Electro-optical characteristics Item 電源電圧 Power supply voltage 供給電圧 Power supply voltage 通信レート トランシーバー Communications rate Transceiver 消費電流 Current drawn Power Down電流 Power-down current Symbol VCC Vlogic ICC Iccsd Ie Ie λp Conditions No Load SD=VCC No Load (Ta 25℃) Min 2.4 1.5 2.4 10.5 4.0 Typ Max Unit 3.6 VCC V V 115.2 Kbps μA μA 113 155 0.01 1 ●外形寸法図/Outline drawing マウント中心 Mounting center 0.975 (4) (4) 放射強度 Emission strength 発光部 放射強度 Light emitting Emission strength portion ピーク発光波長 Peak emission wavelength 最小受光感度 α=0° VCC=Anode=3V α±15° VCC=Anode=3V α=±15° α=0° - 40 mW/sr 40 mW/sr nm 875 888 900 500 4.0 - 発光中心 Light emission center 1.5 1.95 8.0±0.2 受光中心 Light receiving center 2.2 0.85 0.8 2.65 0.85 2.4 3.75 0.85 2.4 3.75 Minimum receiving sensitivity Eemin 受光部 最大受光感度 Light sensing Maximum receiving sensitivity Eemax portion レイテンシー TL Latency 推奨はんだ付けパターン 8.1 μW/cm2 100 mW/cm2 μs R 1. 1 1 1. R 1.145 2.75 1.145 2.65 0.75 0.85 ●諸特性/Characteristics IF-Ie特性(α=0˚, Hight Power Mode時) IF-Ie characteristics (α=0E, Hight Power Mode) 150 LED駆動電流(IFled)特性(Vcc=2.5V) LED driving current (IFled) characteristics(Vcc=2.5V) 60 マウント中心 Mounting center 0.375 0.325 0.05 The following soldering patterns are recommended for reflow-soldering: ベタアース Grounded wholly 12 ⑧ ⑦⑥⑤ ④ ③ ②① 3.325 3.325 1.05 0.6 1.3 8･Ø0.35 50 100 1.2 P0.95×7=6.65 ①LEDA ②TXD1 ③RXD ④GND ⑤SD ⑥TXD2 ⑦Vlogic ⑧VCC 40 ILED(mA) Ie(mW/sr) 1.65 30 50 0.825 20 0.6 3.325 3.325 0 0 100 200 300 10 2.5 3 3.5 4 4.5 5 IF(Ic2+IrLED)(mA) LEDA(V) 単位/Unit : mm P0.95×7=6.65 CIM-55S12RV ●電気的光学的特性/Electro-optical characteristics Item 電源電圧 Power supply voltage 供給電圧 Power supply voltage 通信レート トランシーバー Communications rate Transceiver 消費電流 Current drawn Power Down電流 Power-down current 放射強度 Emission strength 発光部 放射強度 Light emitting Emission strength portion ピーク発光波長 Peak emission wavelength 最小受光感度 Symbol VCC Vlogic ICC Iccsd Ie Ie λp Conditions No Load SD=VCC No Load (Ta 25℃) Min 2.4 1.5 2.4 10.5 4.0 Typ Max Unit 3.6 VCC V V 115.2 Kbps μA μA 113 155 0.01 1 α=0° ●外形寸法図/Outline drawing 発光中心 Light emission center 1.14 R 1. 1 1 1. R VCC=Anode=3V α±15° VCC=Anode=3V α=±15° α=0° - 40 mW/sr 40 mW/sr nm 875 888 900 500 4.0 - マウント中心 Mounting center 2.2 2.55 3.75 2.55 3.75 7.5 受光中心 Light receiving center 085 2.7 2.7 Minimum receiving sensitivity Eemin 受光部 最大受光感度 Light sensing Maximum receiving sensitivity Eemax portion レイテンシー TL Latency 8.1 μW/cm2 100 mW/cm2 μs 1.6 3.3 ⑨ 3.3 ⑩ 0.55 0.7 1.14 推奨はんだ付けパターン The following soldering patterns are recommended for reflow-soldering: 3.325 1 3.325 マウント中心 Mounting center ●諸特性/Characteristics IF-Ie特性(α=0˚, Hight Power Mode時) IF-Ie characteristics (α=0E, Hight Power Mode) 150 LED駆動電流(IFled)特性(Vcc=2.5V) LED driving current (IFled) characteristics(Vcc=2.5V) 60 0.6 ⑧⑦⑥⑤④③ ② ① 3.3 3.3 P0.95×7=6.65±0.1 50 100 40 0.6 0.55 ①ANODE ②TXD1 ③RXD ④GND ⑤SD ⑥TXD2 ⑦Vlogic ⑧Vcc ⑨GND ⑩GND 0.6 Ie(mW/sr) ILED(mA) 30 0.8 0.3 1 50 単位/Unit : mm 3.325 3.325 1 0.6 20 P0.85×7=6.65 0 0 100 200 300 10 2.5 3 3.5 4 4.5 5 IF(Ic2+IrLED)(mA) LEDA(V) 135