CL-482S-HB8-SD-TS

SPECIFICATIONS OF CITILED 1/8 1. Scope of Application These specifications apply to chip type LED lamp, CITILED, model CL-482S-HB8-SD-TS. Reference 2. Part code CL-482S-HB8-SD-TS Series 482S : Mono-color Ultra small, thin, sideways light emission type Lighting color HB8 : High brightness blue Low VF type Diffusion SD: Diffused Shipping mode Non-coded: Bulk TS: Taping (standard) Approved Checked Drawn CITILED Symbol Name CL-482S-HB8 Drawing No Mark Date Description Appro. CITIZEN ELECTRONICS CO.,LTD. SPECIFICATIONS OF CITILED 2/8 3. Outline drawing Unit: mm Tolerance: 0.1 P.C. board (0.15) Resin 0 .3 ±0 .1 4 Reference (0 .3 ) (1 .4 ) (0 .2 ) 1 .8 (0 .9 ) Die center Polarity (0.68) Cathode mark 0.3 ±0.05 1.1 Soldering terminal 4. Performance (1) Absolute Maximum Rating Parameter Power Dissipation Forward Current Forward Pulse Current * Reverse Voltage Operating Temperature Storage Temperature (Ta=25C) Symbol Pd IF IFP VR Top Tst Rating Value 76 20 50* 4 -25  +80 -30  +85 Unit mW mA mA V C C * Duty  1/10, Pulse width 0.1 msec (2) Electro-optical Characteristic (Ta=25C) Parameter Forward Voltage Reverse Current Luminous Intensity * Symbol Condition MIN 20 TYP 2.9 32 MAX 3.24 2 66 Unit VF IF=5mA V IR VR=4V A IV IF=5mA mcd Dominant Wave length d IF=5mA 461 470 479 nm * In accordance with NIST standard Note 1) The tolerance of Forward Voltage measurement is 3% at our tester. Note 2) The tolerance of Luminous Intensity measurement is 10% at our tester. Note 3) The tolerance of Dominant Wave length measurement is 2nm at our tester. Note 4) For handling, please apply CMOS LSI or equivalent to prevent any electrostatic effect. Note 5) Please be aware that the above electro-optical characteristics are guaranteed when applying the current values shown in the table. Please consult us when this product is used under any other conditions. Approved Checked Drawn Symbol Name CITILED CL-482S-HB8 Drawing No Mark Date Description Appro. CITIZEN ELECTRONICS CO.,LTD. SPECIFICATIONS OF CITILED 3/8 5. Characteristic Reference IF- VF Characteristics VF- Ta Characteristics 100 3.8 50 3.6 IF (m A ) 20 IF=5mA 3.4 V F (V ) 10 5 3.2 3.0 2.8 1 2.8 3.2 VF(V) - 20 0 3.6 20 40 60 80 100 o Ta( C) IV- IF Characteristics IV- Ta Characteristics 1000 1000 100 IV (in % ) IV (m cd ) 500 100 50 10 1 0.5 5 1 10 10 - 20 0 50 20 IF(mA) 40 60 80 100 o Ta( C) IF Max- Ta Characteristics Directive Characteristics 30 o 40 o 30 o 20 25 o o o 10 0 10 o 20 o 30 o IF M A X (m A ) o 40 120 o 50 20 o 60 15 50 100 o 60 80 60 o o 70 10 80 5 70 40 o o 80 20 o 0 - 20 0 o 90 20 40 60 80 90 0 100 o Ta( C) Approved Checked Drawn Symbol Name CITILED CL-482S-HB8 Drawing No Mark Date Description Appro. CITIZEN ELECTRONICS CO.,LTD. SPECIFICATIONS OF CITILED 4/8 6. Reliability Reference (1) Details of the tests Test Item Life Test in Continuous Operation Low Temperature Storage Test High Temperature Storage Test Moisture-proof Test Thermal Shock Test Solder Test Heat Test Condition 253C, IF=20 mA  500 +24 -12 hours +24 -30 +3 hours -5 C  500 -12 85 +5 -3 C  500 +24 -12 hours 60 2C, 90 5%RH for 500 +24 hours -12 -30C  30 minutes - 85C  30 minutes, 5-cycle Recommended temperature profile (reflow soldering) Resistance  2, (2nd test must be started after the samples are stabilized thermally.) (2) Judgment Criteria of Failure for Reliability Test Measuring Item Symbol Measuring Condition Forward Voltage Reverse Current Luminous Intensity VF IR IV IF=5 mA VR=4V IF=5 mA Judgement Criteria for Failure >U1.2 >U2