CL-963-1W-C01-TS

SPECIFICATIONS 1/10 1. Scope of Application These specifications apply to CL-963-1W-C01-TS Reference 2. Part code CL - 963 - 1W - C01 - TS Series Number of dice 1:1dice Lighting color Resin color C01:Color C,No.1 Shipping mode Non-coded: Bulk TS: Taping (standard) Approved Checked Drawn Symbol CITILED Name CL-963-1W-C01-TS Drawing No Mark Date Description Appro. CITIZEN ELECTRONICS CO.,LTD. SPECIFICATIONS 2/10 3. Outline drawing Reflecter Reference Die Center Resist 1.05 0 .6 (0 .4 3 ) Resin 1.4 (0.45) 0.5 2- R0.225 (1) (0 .5 3 5 ) 1 .0 5 Soldering terminal (1) (2) Polarity (2) (0.45) (0.181) Unit: mm Tolerance: 0.1 Dimensions do not include burr. 4. Performance (1) Absolute Maximum Rating Parameter Power Dissipation Forward Current Forward Pulse Current * Reverse Voltage Operating Temperature Storage Temperature (Ta=25C) Symbol Pd IF IFP VR Top Tst Rating Value 34 10 50 * 4 -25  +80 -30  +85 Unit mW mA mA V C C * Duty  1/10, Pulse width 0.1 msec (2) Electro-optical Characteristic Parameter Forward Voltage Reverse Current Luminous Intensity Symbol VF IR Iv (Ta=25C) Condition IF=7mA VR=4V IF=7mA MIN TYP MAX Unit 2.38 2.85 3.42 V - - 2 A 362 520 754 mcd Note 1) The tolerance of Forward Voltage measurement is 3% at our tester. Note 2) The tolerance of Luminous Intensity measurement is 10% at our tester. Note 3) For handling, please apply CMOS LSI or equivalent to prevent any electrostatic effect. Note 4) Please be aware that the above electro-optical characteristics are guaranteed when applying the current values shown in the table. Please consult us when this product is used under any other conditions. Approved Checked Drawn Symbol CITILED Name CL-963-1W-C01-TS Drawing No Mark Date Description Appro. CITIZEN ELECTRONICS CO.,LTD. SPECIFICATIONS OF CITILED 3/10 5. Characteristic Reference Forward Current vs. Relative Luminous Intensity Forward Current vs. Forward Voltage Ta=25℃ 2.95 Ta=25℃ 175% 2.93 2.91 150% Iv(a.u.) (％) VF(V) 2.89 2.87 125% 2.85 2.83 100% 2.81 2.79 75% 2.77 2.75 2 3 4 5 6 7 8 9 50% 10 4 5 6 IF(mA) 7 8 9 10 IF(mA) Forward Current vs. Chromaticity Coordinate Ta vs. Forward Voltage Ta=25℃ IF=7mA 0.004 3.10 Δx 3.05 Δy 0.003 VF(V) △x, △y 3.00 0.002 0.001 2.95 2.90 2.85 0.000 2.80 -0.001 2.75 2.70 -0.002 2 3 4 5 6 7 8 9 -30 -20 -10 0 10 10 20 30 40 50 60 70 80 90 Ta(℃) Ta vs. Chromaticity Coordinate IF(mA) Case Temperature vs. Relative Luminous Intensity IF=7mA 0.02 Δx 0.015 Δy 100% 0.01 80% △x, △y Relative Luminous Intensity [a.u.] IF=7mA 120% 60% 40% 0.005 0 -0.005 -0.01 20% -0.015 0% -30 -20 -10 0 -0.02 10 20 30 40 50 60 70 80 90 -30 -20 -10 0 Ta(℃) 10 20 30 40 50 60 70 80 90 Ta(℃) Approved Checked Drawn Symbol CITILED Name CL-963-1W-C01-TS Drawing No Mark Date Description Appro. CITIZEN ELECTRONICS CO.,LTD. SPECIFICATIONS OF CITILED 4/10 5. Characteristic Reference Case Temperature vs. Allowable Forward Current Spectrum 15 Ta=25℃ 1.2 14 13 IF=7ｍA 1 12 9 8 7 6 5 4 0.8 0.6 0.4 1 .0 5 3 0.2 2 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 (0.45) 0 (1) 1 Reflecter Relative le 10 Resin IF MAX(mA) 11 0 350 400 450 500 550 600 650 700 750 800 1.4 Ta(℃) Wavelength(nm) (0.181) 20° (0 .5 3 5 ) Die Center (2) -20° 1.0 (0 .4 3 ) 0 .6 0.9 40° 0.7 0.6 0.5 -60° 60° 0.4 0.3 0.2 -80° 1.05 Soldering terminal 0.8 -40° 80° 0.1 (0.45) 0.5 0.0 -0.5 0 0.5 1 Resist (2) Polarity (1) -1 Directive Characteristic 1.0 2- R0.225 -20° 20° 0.9 0.8 -40° 40° 0.7 0.6 60° 0.5 -60° 0.4 0.3 0.2 -80° 80° 0.1 0.0 -1 -0.5 0 0.5 1 Directive Characteristic Approved Checked Drawn Symbol CITILED Name CL-963-1W-C01-TS Drawing No Mark Date Description Appro. CITIZEN ELECTRONICS CO.,LTD. SPECIFICATIONS OF CITILED 5/10 6. Reliability Reference (1) Details of the tests Test Item Low Temperature Storage Test Test Condition +24 253C, IF=10 mA  500 -12 hours +5 +24 85 -3 C  500 -12 hours +3 +24 -30 -5 C  500 -12 hours Moisture-proof Test +24 60 2C, 90 5%RH for 500 -12 hours Thermal Shock Test -30C  30 minutes - 85C  30 minutes, 5cycle Solder Heat Resistance Test Recommended temperature profile (reflow soldering) after pretreatment*× 2, (2nd test must be started after the samples are stabilized thermally.) Life Test in Continuous Operation High Temperature Storage Test (2) Judgment Criteria of Failure for Reliability Test Measuring Item Symbol Measuring Condition Forward Voltage Reverse Current Luminous Intensity VF IR Iv IF= 7 mA VR=4 V IF=7mA Judgment Criteria for Failure >U1.2 >U2