E010 Series
Sealed Momentary Pushbutton Switches
Features/Benefits
Process sealed, withstands
•
A
Pushbutton
soldering and cleaning
• Long life contact design
•
Snap-fitting plunger available,
accepts a variety of caps
Typical Applications
• Instrumentation
•
Telecommunications and
networking equipment
• Computers and peripherals
• RoHS compliant models available
Models Available
Specifications
Materials
CONTACT RATING: Q contact material: 4 AMPS @ 125 V AC or
28 V DC. See page A-50 for additional ratings.
CASE & BUSHING: Glass filled nylon 6/6, flame retardant
(UL 94V-0).
ELECTRICAL LIFE: 40,000 make-and-break cycles at full load.
PLUNGER: Glass filled nylon or glass filled polyester (PBT)
(UL 94V-0), with internal o-ring seal standard.
CONTACT RESISTANCE: Below 20 mΩ typ. initial @
2–4 V DC, 100 mA, for both silver and gold plated contacts.
INSULATION RESISTANCE: 109Ω min.
DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level.
OPERATING TEMPERATURE: -30ºC to 75ºC.
CAP INSTALLATION FORCE: 10 lbs. max. permissible.
SOLDERABILITY: Per MIL-STD-202F method 208D, or
EIA RS-186E method 9 (1 hour steam aging).
NOTE: Any models supplied with P, Q, B or G contact material are RoHS compliant.
SWITCH SUPPORT: Brass or steel, matte-tin plated.
SWITCH SUPPORT RETAINER: Stainless steel.
END CONTACTS: Q contact material: Coin silver, silver plated.
See A-50 for additional ratings.
CENTER CONTACTS & ALL TERMINALS: Q contact material: Copper
alloy, silver plated. See page A-50 for additional ratings.
TERMINAL SEAL: Epoxy.
HARDWARE: Nut & locking ring-Brass, nickel plated.
Lockwasher-Steel, nickel plated.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown
and described on pages A-47 thru A-51. For additional options not shown in catalog, consult Customer Service Center.
All models are process sealed to withstand machine soldering temperatures and pressure wash cleaning methods.
Switch Function
E112 SPDT On-Mom.
Plunger
S .222” high
L .338” high
M .331” high, snap-fitting
Bushing
D1 Unthreaded
Y Threaded, keyway
Terminations
A Right angle, PC thru-hole
AV2 Vertical right angle, PC thru-hole
C PC Thru-hole
A3 Right angle, snap-in, PC thru-hole
AV3 Vertical right angle, snap-in, PC thru-hole
R2 Right angle with PCB
V3 .460” high, V-bracket
V4 .630” high, V-bracket
V6 .460” high, V-bracket
V8 .953” high, V-bracket
V31 .460” high, snap-in V-bracket
V81 .953” high, snap-in V-bracket
V91 1.150” high, snap-in V-bracket
W .750” long, wire wrap
Z Solder lug
Contact Material
B Gold
P Gold, matte-tin
Q Silver
G Gold over silver
Seal
E
Epoxy
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
A-46
www.ckswitches.com
E010 Series
Sealed Momentary Pushbutton Switches
SWITCH FUNCTION
NO.
POLES
SP
MODEL
NO.
POS. 2
C&K marking this side
E112
ON
MOM.
Pushbutton
SWITCH FUNCTION
POS. 1
A
CONNECTED TERMINALS
POS. 1
POS. 2
SCHEMATIC
C&K marking this side
2-1
2-3
SPDT
SPDT
Terminal Nos.
For Reference Only
Part number shown: E112SD1CQE
MOM. = Momentary
All models
with all options when ordered with G or Q contact material.
PLUNGER
S
L
.218” HIGH
M
.338” HIGH
.331” HIGH, SNAP-FITTING
.120 DIA.
(3,05)
.120 DIA.
(3,05)
**
.224
(5,69)
Standard with D1 bushing (as shown).
Standard with Y bushing (as shown).
† Subtract .100 (2,54) from plunger length when ordered
with Y bushing.
** Add .100 (2,54) from plunger length when ordered
with D1 bushing.
NOTE: Caps available for all plunger options, see pages A-50 and A-51.
BUSHING
D1
UNTHREADED
Y
THREADED, KEYWAY
PANEL MOUNTING
S plunger standard with D1 bushing.
L plunger standard with Y bushing. Available only with C, Z terminations.
Hardware: One dress nut part number 299D01201, one hex nut and lockwasher supplied standard.
Withstands 4 in./lbs. without distortion.
NOTE: Internal o-ring actuator seal standard for all bushing options.
A-47
Third Angle
Projection
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ckswitches.com
E010 Series
Sealed Momentary Pushbutton Switches
Pushbutton
A
TERMINATIONS
C PC THRU-HOLE
Z SOLDER LUG
W WIRE WRAP
SPDT
SPDT
PC MOUNTING
SPDT
Not available with P contact materials.
A RIGHT ANGLE, PC THRU-HOLE
.120 DIA.
(3,05)
.224
(5,69)
E112SD1ABE
SPDT
SECTION A-A
A3 RIGHT ANGLE, SNAP-IN, PC THRU-HOLE
AW RIGHT ANGLE, EXTENDED, PC THRU-HOLE
PC MOUNTING
NOTE: Terminal bend radii and lead-in manufacturing option.
Available with D1 bushing only.
AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150” PITCH
.120 DIA.
(3,05)
E112SD1AV2BE
SPDT
.224
(5,69)
AV3
VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE,
.150” PITCH
PC MOUNTING
NOTE: Terminal bend radii and lead-in manufacturing option.
Available with D1 bushing only.
Third Angle
Projection
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
A-48
www.ckswitches.com
E010 Series
Sealed Momentary Pushbutton Switches
TERMINATIONS
A
Pushbutton
R2 RIGHT ANGLE WITH PCB
PC MOUNTING
.120 DIA.
(3,05)
.224
(5,69)
E112SD1R2BE
SPDT
NOTE: Available with D1 bushing and B contact material only.
V3, V4 VERTICAL MOUNT, V-BRACKET
V31, V91 VERTICAL MOUNT, V-BRACKET, SNAP-IN
.120 DIA.
(3,05)
PC MOUNTING
E112SD1__BE
SPDT
SNAP-IN
OPTION
CODE
V3, V31
DIM ‘A’
.460 (11,68)
V4
.630 (16,00)
V91
1.150 (29,21)
NOTE: Available with D1 bushing only.
V6, V8 VERTICAL MOUNT, V-BRACKET
V81 VERTICAL MOUNT, V-BRACKET, SNAP-IN
.120 DIA.
(3,05)
PC MOUNTING
E112SD1__BE
SPDT
OPTION
CODE
DIM ‘A’
V6
.460 (11,68)
V8, V81
.953 (24,21)
NOTE: Available with D1 bushing only.
Third Angle
Projection
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
A-49
www.ckswitches.com
E010 Series
Sealed Momentary Pushbutton Switches
CONTACT MATERIAL
Pushbutton
A
OPTION
CODE
CONTACT
MATERIAL
TERMINAL
PLATING
B
P
RATINGS
GOLD 1
GOLD 1
LOW LEVEL/DRY CIRCUIT
0.4 VA MAX. @ 20 V AC OR DC MAX.
MATTE-TIN 6
Q
SILVER 4,5
SILVER 5
G
GOLD OVER SILVER 2,3
GOLD 3
POWER
4 AMPS @ 125 V AC 0R 28 V DC.
LOW LEVEL/DRY CIRCUIT OR POWER
0.4 VA MAX. @ 20 V AC OR DC MAX. OR
4 AMPS @ 125 V AC 0R 28 V DC.
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
1 CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate.
NOTE: Any models supplied with P, Q, B or G contact material are RoHS compliant.
2 END CONTACTS: Coin silver, with gold plate over nickel plate.
All models
3 CENTER CONTACTS & ALL TERMINALS: Coin silver, with gold plate
B contact material standard with all terminations except C, Z.
over nickel plate.
with all options when ordered with G or Q contact material.
B contact material must be ordered with R2 terminations.
4 END CONTACTS: Coin silver, silver plated.
Q contact material standard with C, Z terminations.
5 CENTER CONTACTS & ALL TERMINALS: Copper alloy, silver plated.
P contact materials not available with Z terminations.
6 TERMINALS: Copper alloy, with matte-tin over nickel plate.
SEAL
E EPOXY SEAL
AVAILABLE HARDWARE
Cap
Cap
.120
(3,05)
Cap
.200 DIA.
(5,08 )
.155
(3,94)
PART NO.
PART NO.
PART NO.
708901000 WHITE
708902000 BLACK
708903000 RED
752701000 WHITE
752702000 BLACK
752703000 RED
801801000 WHITE
801802000 BLACK
801803000 RED
Material: Nylon
Finish: Gloss
Material: Nylon
Finish: Gloss
Material: Nylon
Finish: Gloss
NOTE: Additional nuts, locking rings and lockwashers available separately, see section “Technical Data and Additional Hardware”.
Other cap colors available, consult Customer Service Center.
Third Angle
Projection
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
A-50
www.ckswitches.com
E010 Series
Sealed Momentary Pushbutton Switches
AVAILABLE HARDWARE
Cap, Snap-fitting plunger
Cap, Snap-fitting plunger
A
Cap
.240
(6,10)
PART NO.
PART NO.
PART NO.
PART NO.
452D01000 WHITE
452D02000 BLACK
452D03000 RED
894101000 WHITE
894102000 BLACK
894103000 RED
484601000 WHITE
484602000 BLACK
484603000 RED
798201000 WHITE
798202263 BLACK
798203000 RED
Material: Nylon
Finish: Gloss
Material: Nylon
Finish: Gloss
Material: Nylon
Finish: Gloss
Material: Nylon
Finish: Matte
NOTE: Additional nuts, locking rings and lockwashers available separately, see section “Technical Data and Additional Hardware”.
Other cap colors available, consult Customer Service Center.
TYPICAL APPLICATION
Frames snap into panel opening and are independent from switch mounting. Accurate positioning of the PC
mounted switch relative to the panel opening is necessary to provide proper clearance between actuator and
frame. Available in two basic styles and four panel thicknesses .047-.125 in. Material: Nylon. Finish: Matte.
Panel Inserts
.090” (2,29) PANEL THK.
.125” (3,18) PANEL THK.
PART NO.
PART NO.
432702263
432802263 BLACK
Above frames (part nos. 432XXXXXX) are also available with insert which accepts LED for
indicator light assembly. Order insert separately from frame. Blank insert panel (without hole
for LED) also available. LED not included.
PANEL INSERT
WITH HOLE FOR LED
BLANK PANEL INSERT
WITHOUT HOLE FOR LED
PART NO.
PART NO.
894902000
476602000 BLACK
Special colors, custom markings available, consult Customer Service Center.
Third Angle
Projection
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
A-51
www.ckswitches.com
Pushbutton
.450 SQ.
(11,43)
.195
(4,95)