7203J2V2BE2

7000 Series Miniature Rocker & Lever Handle Switches Features/Benefits • Multi-pole and multi-position • Wide variety of actuator and termination options • Epoxy terminal-seal compatible Typical Applications • Telecommunications • Instrumentation • Medical equipment with bottom wash cleaning • RoHS compliant Specifications Materials CONTACT RATING: B contact material: 0.4 VA max. @ 20 V AC or DC max. Q contact material: 5 AMPS @ 120 V AC or 28 V DC; 2 AMPS @ 250 V AC. See page G-20 for additional ratings. ELECTRICAL LIFE: 7X01 and UX1 models: 100,000 make-and-break cycles at full load. All other models: 40,000 cycles. CONTACT RESISTANCE: Below 10 m Ω typ. initial @ 2-4 V DC, 100 mA, for both silver and gold plated contacts. INSULATION RESISTANCE: 109 Ω min. DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level. OPERATING TEMPERATURE: –30ºC to 85ºC. SOLDERABILITY: Per MIL-STD-202F method 208D, or EIA RS-186E method 9 (1 hour steam aging). CASE: Glass filled nylon 6/6, flame retardant, heat stabilized, or diallyl phthalate (DAP) (UL 94V-0). ACTUATOR: Nylon, black. FRAME (FRONT MOUNT): Nylon, black. FRAME (REAR MOUNT): Spring steel, black. BUSHING: Brass or zinc, nickel plated. HOUSING: Stainless steel. SWITCH SUPPORT: Brass or steel, matte-tin plated. END CONTACTS: B contact material: Copper alloy, with gold plate over nickel plate. Q contact material: Coin silver, silver plated. See page G-20 for additional contact materials. CENTER CONTACTS & ALL TERMINALS: B contact material: Copper alloy, with gold plate over nickel plate. Q contact material: Copper alloy, silver plated. See page G-20 for additional contact materials. TERMINAL SEAL: Epoxy. Refer to Soldering and Cleaning in Technical Data Section HARDWARE: Mounting nuts & screws: Brass. Lockwasher: Stainless steel. Standoff: Nylon standard. NOTE: Any models supplied with S, P, R, Q, B or G contact material are RoHS compliant. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Build-A-Switch Rocker To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages G-4 through G-24 . For additional options not shown in catalog, consult Customer Service Center. All models have epoxy terminal seal and are compatible with all “bottom-wash” PCB cleaning methods. G Switch Function 7101 SP On-None-On 7103 SP On-Off-On 7105 SP Mom.-Off-Mom. 7107 SP On-Off-Mom. 7108 SP On-None-Mom. 7109 SP None-On-Mom. 7201 DP On-None-On 7203 DP On-Off-On 7205 DP Mom.-Off-Mom. 7207 DP On-Off-Mom. 7208 DP On-None-Mom. 7211 DP On-On-On 7213 DP On-On-Mom. 7215 DP Mom.-On-Mom. 7301 3P On-None-On 7303 3P On-Off-On 7401 4P On-None-On 7405 4P Mom.-Off-Mom. 7411 4P On-On-On Note: UL models available, see pages G-5 and G-6. 15 Jan 21 Actuator J1 .531 long rocker J2 Lever J3 .906” long rocker J10 1.318” long rocker J11 Rocker with frame J15 Rocker, snap-in J16 Rocker with frame, snap-in J19 Rocker with frame J21 Lever with frame J25 Lever, snap-in J26 Lever with frame, snap-in J37 Rocker with frame J50 Rocker J51 Rocker with frame J52 Rocker with frame for LED, snap-in J60 Lever J61 Lever with frame, snap-in J62 Lever with frame for LED, snap-in J90 Lever J91 Lever with frame, snap-in Terminations A Right angle, PC thru-hole AV2 Vertical right angle, PC thru-hole C PC Thru-hole Z Solder lug A3 Right angle, snap-in, PC thru-hole AV3 Vertical right angle, snap-in, PC thru-hole AW3 Right angle, extended, PC thru-hole V2 .555” high, V-bracket V3 .460” high, V-bracket V4 .630” high, V-bracket V5 Vertical right angle, PC thru-hole V6 .460” high, V-bracket V7 .630” high, V-bracket V8 .953” high, V-bracket V9 1.150” high, V-bracket V31 .460” high, V-bracket, snap-in V51 Vertical right angle, snap-in V61 .460” high, V-bracket, snap-in W .750” long, wire wrap W3 .425” long, wire wrap W5 1.305” long,wire wrap Z3 Quick connect G–4 Contact Material B Gold P Gold, matte tin Q Silver S Silver, matte-tin G Gold over silver R Gold over silver, matte-tin Seal E Epoxy I Epoxy potted base Actuator Color Frame Color 2 Black 2 Black 1 White NONE No frame color required 3 Red 1 White Metal Frame Color (J11, J19, J21 & J37 Actuators) 2 Black 1 White Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ckswitches.com 7000 Series Miniature Rocker & Lever Handle Switches SWITCH FUNCTION POS. 1 NO. POLES SP MODEL NO. UL** MODEL NO. SWITCH FUNCTION POS. 2 POS. 3 CONNECTED TERMINALS POS. 1 POS. 2 POS. 3 C&K marking on opposite side 7101 U11 ON NONE ON 7103 U13 ON OFF ON 7105 U15 MOM. OFF MOM. 7107 U17 ON OFF MOM. 7108 U18 ON NONE MOM. 7109 U19 NONE ON MOM. C&K marking on opposite side SCHEMATIC N/A 2-3 OPEN 2-1 N/A N/A 2-3 2-1 SPDT SPDT Terminal Nos. For Reference Only Part number shown: 7101J1ZQE2 DP 7201 U21 ON NONE ON 7203 U23 ON OFF ON 7205 U25 MOM. OFF MOM. 7207 U27 ON OFF MOM. 7208 U28 ON NONE MOM. 7211* U211* ON ON ON 7213* U213* ON ON MOM. 7215* U215* MOM. ON MOM. N/A OPEN 2-3,5-6 2-1,5-4 N/A 2-3,5-4 DPDT DPDT MOM. = Momentary * Wiring for 3-way switch ** U11 through U413 model nos. with all options when ordered with G, Q, R or S contact material. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 15 Jan 21 G–5 www.ckswitches.com Rocker Terminal Nos. For Reference Only Part number shown: 7201J1ZQE2 G 7000 Series Miniature Rocker & Lever Handle Switches SWITCH FUNCTION CONNECTED TERMINALS SWITCH FUNCTION NO. POLES 3P MODEL NO. 7301 UL** MODEL NO. POS. 1 POS. 2 POS. 3 POS. 1 C&K marking on opposite side U31 ON NONE POS. 2 POS. 3 N/A ON 2-3,5-6,8-9 7303 SCHEMATIC C&K marking on opposite side 2-1,5-4,8-7 OPEN U33 ON OFF ON 3PDT 3PDT Part number shown: 7301J1ZQE2 Terminal Nos. For Reference Only 7401 U41 ON NONE 7405 U45 MOM. OFF 7411* U411* ON ON 4P N/A ON MOM. 2-3,5-6,8-9,11-12 ON  2-1,5-4,8-7,11-10 OPEN 4PDT 2-3,5-4,8-9,11-10 4PDT Rocker Part number shown: 7401J1ZQE2 G Terminal Nos. For Reference Only MOM. = Momentary ** U11 through U411 model nos. with all options when ordered with G, Q, R or S contact material. * Wiring for 3-way switch: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 15 Jan 21 G–6 www.ckswitches.com 7000 Series Miniature Rocker & Lever Handle Switches ACTUATOR COLOR ACTUATOR–PANEL REAR MOUNT J1  ROCKER ACTUATOR OPTION CODE ACTUATOR COLOR 2 BLACK 1 WHITE 3 RED Finish: Matte. Other colors, custom actuator markings and legends available, consult Customer Service Center. NOTE: Hardware: two each—mounting screws, nuts, lockwashers and standoffs for 1/8 inch thick panel are supplied standard on all switches with panel mounting brackets. Actuators available separately, see page G-21 through G-22. Hardware is available see Technical Data section of this catalog. J2  LEVER J1, J2, J3 & J10 Actuators available with C, W-W5, Z or Z3 terminations. PANEL MOUNTING J1 & J2 Actuators J3  ROCKER DIMPLES MFG. OPTION J3 Actuator J10  ROCKER DIMPLES MFG. OPTION J10 Actuator Rocker Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 15 Jan 21 G–7 www.ckswitches.com G 7000 Series Miniature Rocker & Lever Handle Switches ACTUATOR COLOR ACTUATOR–SNAP-IN FRONT MOUNT ACTUATOR FRAME COLOR J15  ROCKER, SNAP-IN OPTION CODE ACTUATOR COLOR 2 BLACK 1 WHITE 3 RED OPTION CODE 2 No frame color choice required FRAME COLOR NONE No Frame Color (J15 or J25options) WHITE 1 J16  ROCKER WITH FRAME, SNAP-IN BLACK Finish: Matte. Other colors, custom actuator markings and legends available, consult Customer Service Center. NOTE: Actuators & frames available separately, see pages G-21 through G-22. J15, J16, J25, J26, J50 & J51 Actuators available with 71XX, 72XX, U1XX & U2XX models and C, W-W5, Z and Z3 terminations. J25  LEVER, SNAP-IN PANEL MOUNTING J15, J16, J25 & J26 Actuators No frame color choice required J26  LEVER WITH FRAME, SNAP-IN J50 Actuator * Rocker J50  ROCKER, SNAP-IN * For J50: Increase this dimension to .620/.625 (15,75/15,88) for .091/.125 (2,31/3,18) thk. panels. No frame color choice required G Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 15 Jan 21 G–8 www.ckswitches.com 7000 Series Miniature Rocker & Lever Handle Switches ACTUATOR COLOR ACTUATOR–SNAP-IN FRONT MOUNT ACTUATOR FRAME COLOR J51  ROCKER WITH FRAME, SNAP-IN OPTION CODE ACTUATOR COLOR 2 BLACK 1 WHITE 3 RED OPTION CODE J52  ROCKER WITH FRAME FOR LED, SNAP-IN 2 FRAME COLOR BLACK NONE No Frame Color (J15 or J25 options) WHITE 1 Finish: Matte. Other colors, custom actuator markings and legends available, consult Customer Service Center. NOTE: Actuators & frames available separately, see pages G-21 through G-22. J51, J52, J60 & J61 Actuators available with 71XX, 72XX, U1XX & U2XX models and C, W-W5, Z and Z3 terminations. LED not included. For LED information, see page G-24. J60  LEVER, SNAP-IN PANEL MOUNTING J51, J60 & J61 Actuators * No frame color choice required J52 Actuator J61  LEVER WITH FRAME, SNAP-IN * Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 15 Jan 21 G–9 www.ckswitches.com Rocker For J51, J52: Increase this dimension to .620/.625 (15,75/15,88) for .060/.125(1,52/3,18) thk. panels. G 7000 Series Miniature Rocker & Lever Handle Switches ACTUATOR COLOR ACTUATOR–SNAP-IN FRONT MOUNT J62  LEVER WITH FRAME FOR LED, SNAP-IN OPTION CODE 2 BLACK 1 WHITE 3 RED OPTION CODE FRAME COLOR 2 BLACK NONE No Frame Color (J90 options) WHITE 1 FRAME COLOR ACTUATOR COLOR ACTUATOR ACTUATOR COLOR Finish: Matte. Other colors, custom actuator markings and legends available, consult Customer Service Center. LED not included. For LED information, see page H-25. J90  LEVER, SNAP-IN NOTE: Actuators & frames available separately, see pages G-21 through G-22. J62, J90 & J91 Actuators available with 71XX, 72XX, U1XX & U2XX models and C, W-W5, Z & Z3 terminations. PANEL MOUNTING J62 Actuator * No frame color choice required. J91  LEVER WITH FRAME, SNAP-IN J90, J91 & J93 Actuators Rocker * G * For J90: Increase this dimension to .620/.625 (15,75/15,88) for .091/.125 (2,31/3,18) thk. panels. For J91: Increase this dimension to .620/.625 (15,75/15,88) for .060/.125 (1,52/3,18) thk. panels. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 15 Jan 21 G–10 www.ckswitches.com 7000 Series Miniature Rocker & Lever Handle Switches ACTUATOR–REAR MOUNT ACTUATOR FRAME COLOR J11  ROCKER WITH FRAME OPTION CODE ACTUATOR COLOR 2 BLACK 1 WHITE 3 RED OPTION CODE J19  ROCKER WITH FRAME FRAME COLOR 2 BLACK 1 WHITE Actuator finish: Matte. Frame finish: Gloss. Other colors, custom actuator markings and legends available, consult Customer Service Center. NOTE: Actuators & frames available separately, see pages G-21 through G-22. J11, J19, J21 & J37 Actuators available with C, W-W5, Z & Z3 terminations. J37 offered with Black Frame (2 color option) only. PANEL MOUNTING J11 & J21 Actuators J21  LEVER WITH FRAME J19 Actuator J37  ROCKER WITH FRAME .313 (7,95) J37 Actuator Rocker Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 15 Jan 21 G–11 www.ckswitches.com G 7000 Series Miniature Rocker & Lever Handle Switches ACTUATOR COLOR ACTUATOR–PC MOUNT ACTUATOR J1  ROCKER OPTION CODE ACTUATOR COLOR 2 BLACK 1 WHITE 3 RED J2  LEVER Finish: Matte. Other colors, custom actuator markings and legends available, consult Customer Service Center. NOTE: Some permissible actuator/termination combinations may lack clearance between actuator and PC board, and care must be exercised to accommodate this condition. Actuators available separately, see page G-21 through G-22. J1, J2 actuators available with A, A3, AV2, AV3, AW3 & V2 terminations. J3 actuators available with AV2, AV3 & V2-V61 terminations. J50 actuators available with A (DP, 3P models only), A3 (DP, 3P models only), AV2, AV3, AW3 (DP, 3P models only) & V2-V61 terminations. J3  ROCKER Rocker J50  ROCKER G Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 15 Jan 21 G–12 www.ckswitches.com 7000 Series Miniature Rocker & Lever Handle Switches ACTUATOR COLOR ACTUATOR–PC MOUNT ACTUATOR J60  LEVER OPTION CODE ACTUATOR COLOR 2 BLACK 1 WHITE 3 RED Finish: Matte. Other colors, custom actuator markings and legends available, consult Customer Service Center. NOTE: Some permissible actuator/termination combinations may lack clearance between actuator and PC board, and care must be exercised to accommodate this condition. J90  LEVER Actuators available separately, see page G-21 through G-22. J60 & J90 actuators available with A (DP, 3P models only), A3 (DP, 3P models only), AV2, AV3, AW3 (DP, 3P models only) & V2-V61 terminations. TERMINATIONS Z  SOLDER LUG C  PC THRU-HOLE PC MOUNTING SPDT thru 4PDT Not available with P, R or S contact materials. Available actuators, see pages G-7 through G-13. Z3  QUICK CONNECT SPDT thru 4PDT NOTE: Available actuators, see pages G-7 through G-13. W, W3, W5  WIRE WRAP OPTION CODE Dim 'A' W W3 .425 (10,80) W5 1.305 (33,15) .750 (19,05) SPDT thru 4PDT NOTE: Available actuators, see pages G-7 through G-13. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 15 Jan 21 Rocker SPDT thru 4PDT Not available with P, R or S contact materials. Available actuators, see pages G-7 through G-13. Mating quick connector available; order part number 530100000, page G-22. DIM ‘A’ G–13 www.ckswitches.com G 7000 Series Miniature Rocker & Lever Handle Switches TERMINATIONS A  RIGHT ANGLE, PC THRU-HOLE SECTION A-A Actuator Shown In Pos. 1 A3  RIGHT ANGLE, SNAP-IN, PC THRU-HOLE 7101J1ABE2 Horizontal Actuation SPDT AW3  RIGHT ANGLE, EXTENDED, PC THRU-HOLE PC MOUNTING .14 (3,6) Not available with I seal option. Available actuators, see pages G-6 and G-12. Terminal bend radii and lead-in manufacturing option. NOTE: PC pattern must clear switch support leg. A  RIGHT ANGLE, PC THRU-HOLE SECTION A-A Actuator Shown In Pos. 1 7201J1ABE2 Horizontal Actuation DPDT A3  RIGHT ANGLE, SNAP-IN, PC THRU-HOLE Rocker PC MOUNTING Not available with I seal option. Available actuators, see pages G-6 and G-12. Terminal bend radii and lead-in manufacturing option. G Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 15 Jan 21 G–14 www.ckswitches.com 7000 Series Miniature Rocker & Lever Handle Switches TERMINATIONS A  RIGHT ANGLE, PC THRU-HOLE 7301J1ABE2 Horizontal Actuation 3PDT Actuator Shown In Pos. 1 SECTION A-A PC MOUNTING Not available with I seal option. Available actuators, see pages G-6 and G-12. Terminal bend radii and lead-in manufacturing option. AV2  VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150” PITCH 7101J1AV2BE2 Vertical Actuation SPDT Actuator Shown In Pos. 1 SECTION A-A AV3  VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE, .150” PITCH PC MOUNTING Rocker Not available with I seal option. Available actuators, see pages G-6 and G-12. Terminal bend radii and lead-in manufacturing option. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 15 Jan 21 G–15 www.ckswitches.com G 7000 Series Miniature Rocker & Lever Handle Switches TERMINATIONS AV2  VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150” PITCH SECTION A-A Actuator Shown In Pos. 1 AV3  VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE, 7201J1AV2BE2 Vertical Actuation DPDT PC MOUNTING .150” PITCH Not available with I seal option. Available actuators, see pages G-6 and G-12. Terminal bend radii and lead-in manufacturing option. AV2  VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150” PITCH Actuator Shown In Pos. 1 SECTION A-A AV3  VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE, 7301J1AV2BE2 Vertical Actuation 3PDT PC MOUNTING Rocker .150” PITCH Not available with I seal option. Available actuators, see pages G-6 and G-12. Terminal bend radii and lead-in manufacturing option. G Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 15 Jan 21 G–16 www.ckswitches.com 7000 Series Miniature Rocker & Lever Handle Switches TERMINATIONS AV2  VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150” PITCH 7401J1AV2BE2 Vertical Actuation 4PDT Actuator Shown In Pos. 1 SECTION A-A AV3  VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE, .150” PITCH PC MOUNTING Not available with I seal option. Available actuators, see pages G-6 and G-12. Terminal bend radii and lead-in manufacturing option. V5  VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150” PITCH 7101J1V5BE2 Vertical Actuation SPDT Actuator Shown In Pos. 1 SECTION A-A V51  VERTICAL RIGHT ANGLE, SNAP-IN, PC MOUNTING PC THRU-HOLE, .150” PITCH Rocker Not available with I seal option. Available actuators, see pages G-6 and G-12. Terminal bend radii and lead-in manufacturing option. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 15 Jan 21 G–17 www.ckswitches.com G 7000 Series Miniature Rocker & Lever Handle Switches TERMINATIONS V5  VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150” PITCH Actuator Shown In Pos. 1 SECTION A-A 7201J1V5BE2 Vertical Actuation DPDT V51  VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE, .150” PITCH PC MOUNTING Not available with I seal option. Available actuators, see pages G-6 and G-12. Terminal bend radii and lead-in manufacturing option. V2, V6, V7, V8  VERTICAL MOUNT, V-BRACKET V61  VERTICAL MOUNT, V-BRACKET, SNAP-IN PC MOUNTING Rocker 7101J1__BE2 SPDT Actuator Shown In Pos. 1 Actuator Shown In Pos. 1 OPTION CODE DIM ‘A’ V2, V21 .555 (14,10) V6, V61 .460 (11,68) V7 .630 (16,00) V8 .953 (24,21) Not available with I seal option. Available actuators, see pages G-6 and G-12. G Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 15 Jan 21 G–18 www.ckswitches.com 7000 Series Miniature Rocker & Lever Handle Switches TERMINATIONS V2, V6, V7, V8  VERTICAL MOUNT, V-BRACKET V21, V61  VERTICAL MOUNT, V-BRACKET, SNAP-IN PC MOUNTING SNAP-IN 7201J1__BE2 DPDT Actuator Shown In Pos. 1 Not available with I seal option. Available actuators, see pages G-6 and G-12. OPTION CODE DIM ‘A’ V2, V21 .555 (14,10) V6, V61 .460 (11,68) V7 .630 (16,00) V8 .953 (24,21) V2, V7, V8  VERTICAL MOUNT, V-BRACKET V21  VERTICAL MOUNT, V-BRACKET, SNAP-IN PC MOUNTING SNAP-IN 7301J1__BE2 3PDT Actuator Shown In Pos. 1 Not available with I seal option. Available actuators, see pages G-6 and G-12. OPTION CODE DIM ‘A’ V2, V21 .555 (14,10) V7 .630 (16,00) V8 .953 (24,21) V2, V7, V8  VERTICAL MOUNT, V-BRACKET V21  VERTICAL MOUNT, V-BRACKET, SNAP-IN PC MOUNTING 7401J1__BE2 4PDT Actuator Shown In Pos. 1 Not available with I seal option. Available actuators, see pages G-6 and G-12. OPTION CODE DIM ‘A’ V2, V21 .555 (14,10) V7 .630 (16,00) V8 .953 (24,21) Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 15 Jan 21 G–19 www.ckswitches.com Rocker SNAP-IN G 7000 Series Miniature Rocker & Lever Handle Switches TERMINATIONS V3, V4, V9  VERTICAL MOUNT, V-BRACKET V31  VERTICAL MOUNT, V-BRACKET, SNAP-IN PC MOUNTING 7101J1__BE2 SPDT SNAP-IN Actuator Shown In Pos. 1 Not available with I seal option. Available actuators, see pages G-6 and G-12. OPTION CODE DIM ‘A’ V3, V31 .460 (11,68) V4 .630 (16,00) V9 1.150 (29,21) V3, V4, V9  VERTICAL MOUNT, V-BRACKET V31  VERTICAL MOUNT, V-BRACKET, SNAP-IN PC MOUNTING 7201J1__BE2 DPDT SNAP-IN OPTION CODE DIM ‘A’ V3, V31 .460 (11,68) Actuator Shown In Pos. 1 V4 .630 (16,00) Not available with I seal option. Available actuators, see pages G-6 and G-12. V9 1.150 (29,21) V4, V9  VERTICAL MOUNT, V-BRACKET PC MOUNTING Rocker 7301J1__BE2 3PDT SNAP-IN OPTION CODE SNAP-IN Actuator Shown In Pos. 1 Actuator Shown In Pos. 1 Not available with I seal option. Available actuators, see pages G-6 and G-12. G DIM ‘A’ V4 .630 (16,00) V9 1.150 (29,21) Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 15 Jan 21 G–20 www.ckswitches.com 7000 Series Miniature Rocker & Lever Handle Switches TERMINATIONS V4, V9  VERTICAL MOUNT, V-BRACKET PC MOUNTING SNAP-IN 7401J1__BE2 4PDT OPTION CODE Actuator Shown In Pos. 1 Not available with I seal option. Available actuators, see pages G-6 and G-12. DIM ‘A’ V4 .630 (16,00) V9 1.150 (29,21) CONTACT MATERIAL OPTION CODE B P Q S G R CONTACT MATERIAL GOLD 1 TERMINAL PLATING GOLD MATTE-TIN 6 SILVER SILVER 4,5 GOLD OVER SILVER 2,3 1 RATINGS LOW LEVEL/ DRY CIRCUIT 0.4 VA MAX. @ 20 V AC OR DC MAX. 5 MATTE-TIN 6 POWER GOLD 3 LOW LEVEL/DRY MATTE-TIN 6 CIRCUIT OR POWER 5 AMPS @ 120 V AC OR 28 V DC; 2 AMPS @ 250 V AC. 0 4 VA MAX @ 20 V AC OR DC MAX OR 5 AMPS @ 120 V AC OR 28 V DC; 2 AMPS @ 250 V AC. * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. 1 CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate. 2 END CONTACTS: Coin silver, with gold plate over nickel plate. U11-U415 model numbers G, Q, S & R contact material. with all options when ordered with 3C  ENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate over nickel plate. 4 END CONTACTS: Coin silver, silver plated. Q contact material standard with C, Z & Z3 terminations. B contact material standard with all terminations except C, Z & Z3. P, S & R, contact materials not available with Z & Z3 terminations. 5 CENTER CONTACT & ALL TERMINALS: Copper alloy, silver plated. 6 TERMINALS: Copper alloy, with matte-tin over nickel plate. NOTE: Any models supplied with Q, B, G S, P & R contact material are RoHS compliant. SEAL E  EPOXY SEAL I  EPOXY POTTED BASE 'A' DIM ‘A’ SP .410 (10,41) DP .440 (11,18) 3P .505 (12,83) 4P .505 (12,83) Rocker NO. POLES Available with C, W through W5, Z & Z3 terminations. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 15 Jan 21 G–21 www.ckswitches.com G 7000 Series Miniature Rocker & Lever Handle Switches AVAILABLE HARDWARE Panel mounting hardware for rocker and lever handle switches is available separately. Mounting hardware consists of two screws, two nuts, two standoffs and two lockwashers per switch, and is available for panel thicknesses of 1/16, 3/32 and 1/8 inch. See part numbers below. Qty Part Number Description 2 761103000 Standoffs 2 764100000 Mounting screws 2 764200000 Lock washers 2 764300000 Hex nuts TYPICAL ASSEMBLY SCREW PANEL THICKNESS STAND-OFF LENGTH STAND-OFF LOCKWASHER NUT J3 actuators J1 & J2 actuators PART NO. PANEL THK. STANDOFF LENGTH PART NO. PANEL THK. STANDOFF LENGTH 761103000 1/8 IN. (3,18) .233 (5,92) 770603000 1/8 IN. (3,18) .233 (5,92) J10 actuators PART NO. PANEL THK. STANDOFF LENGTH 770703000 1/8 IN. (3,18) .233 (5,92) MATERIAL Rocker Screws, nuts, lockwashers: Stainless steel. Standoffs: Nylon, standard. G J1, J11, J15 & J16 Actuators J2, J21, J25 & J26 Actuators J3 & J37 Actuators PART NO. PART NO. PART NO. 776A01000 WHITE 776A02263 BLACK 776A03000 RED 426D01000 WHITE 426D02263 BLACK 426D03000 RED 431D01000 WHITE 431D02263 BLACK 431D03000 RED Material: Nylon Finish: Matte Material: Nylon Finish: Matte Material: Nylon Finish: Matte J50, J51 & J52 Actuators J60, J61 & J62 Actuators PART NO. PART NO. 775A01000 WHITE 775A02263 BLACK 775A03000 RED 598101000 WHITE 613802263 BLACK 598103000 RED Material: Nylon Finish: Matte Material: Nylon Finish: Matte Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 15 Jan 21 G–22 www.ckswitches.com 7000 Series Miniature Rocker & Lever Handle Switches AVAILABLE HARDWARE J90 & J91 Actuators J10 & J19 Actuators PART NO. PART NO. 598001000 WHITE 598002263 BLACK 598003000 RED 769501000 WHITE 769502263 BLACK 769503000 RED Material: Nylon Finish: Matte Material: Nylon Finish: Matte Frame for J11 & J21 Actuators Frame for J16 & J26 Actuators Frame for J51, J61 & J91 Actuators PART NO. PART NO. 459101000 WHITE 459102000 BLACK 459103000 RED 615601000 WHITE 615602263 BLACK 615603000 RED Material: Spring Steel Material: Nylon Finish: Matte Material: Nylon Finish: Matte Frame for J19 Actuator Frame for J37 Actuator Frame for J52 & J62 Actuators PART NO. 764500746 BLACK ENAMEL 764500747 WHITE ENAMEL 764601106 RETAINING SPRING Fits Z3 Termination female connector PART NO. 530100000 Available in loose pieces. Rocker PART NO. PART NO. 781000746 BLACK ENAMEL 781000747 WHITE ENAMEL Material: Spring Steel PART NO. 445400746 BLACK ENAMEL 613301000 WHITE 613302263 BLACK 613303000 RED Material: Nylon Finish: Matte Material: Spring Steel Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 15 Jan 21 G–23 www.ckswitches.com G 7000 Series Miniature Rocker & Lever Handle Switches AVAILABLE HARDWARE Frames snap into panel opening and are independent from switch mounting. Accurate positioning of the PC mounted switch relative to the panel opening is necessary to provide proper clearance between actuator and frame. Available in two basic styles and four panel thicknesses .047-.125 in. Material: Nylon. Finish: Matte. TYPICAL APPLICATION J1 & J2 Actuators .047” (1,19) PANEL THK. .062” (1,57) PANEL THK. .090” (2,29) PANEL THK. .125” (3,18) PANEL THK. PART NO. PART NO. PART NO. PART NO. 452902263 452702263 452802263 452602263 BLACK .047” (1,19) PANEL THK. .062” (1,57) PANEL THK. .090” (2,29) PANEL THK. .125” (3,18) PANEL THK. PART NO. PART NO. PART NO. PART NO. 432502263 432602263 432702263 432802263 BLACK J50, J60 & J90 Actuators PANEL MOUNTING For part numbers 4529xxxxx, 4527xxxxx, 4528xxxxx, 4526xxxxx .005 R. MAX. (0,13) TYP. For part numbers 4325xxxxx, 4326xxxxx .495 – .505 (12,57 – 12,83) .595 – .605 (15,11 – 15,37) .005 R. (0,13) MAX. TYP. .495 – .505 (12,57 – 12,83) .620 – .625 (15,75 – 15,88) Rocker .797 – .803 (20,24 – 20,40) .005 R. .495 – .505 (0,13) (12,57 – 12,83) MAX. TYP. For part numbers 4327xxxxx, 4328xxxxx G Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 15 Jan 21 G–24 www.ckswitches.com 7000 Series Miniature Rocker & Lever Handle Switches AVAILABLE HARDWARE Panel Inserts Will fit Separate Snap-in frames for J50, J60 & J90 actuators Above frames (part nos. 432XXXXXX) are also available with insert which accepts LED for indicator light assembly. Order insert separately from frame. Blank insert panel (without hole for LED) also available. LED not included. PANEL INSERT WITH HOLE FOR LED BLANK PANEL INSERT WITHOUT HOLE FOR LED PART NO. PART NO. 894902000 476602000 BLACK NOTE: Special colors, custom markings available, consult Customer Service Center. LED INFORMATION Process Information: Soldering to LED leads must be completed within 5 seconds at 500º F (260ºC) maximum. LEDs are not supplied with J52, J62 options. LED snaps into switch frame surrounding actuator and is wired externally. Flat denotes cathode. .230 DIA. (5,84˘) .200 DIA. (5,08˘) .025 SQ. TYP. (0,63) .030 (0,76) .340 (8,64) .750 (19,05) Suggested LED for J52 & J62 options. Dimensions for reference only. Rocker Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 15 Jan 21 G–25 www.ckswitches.com G