CCM02-2504LFT

smartCard2011_6.0.qxd:2002 CCM Catalog.qxd 5/16/11 4:05 PM Page 12 CCM02 Series Features • Operating life 500,000 cycles • Insertion force 40N • EMV • PCI & PCI ready • Card detection sealed switch Typical Applications • Transaction • Identification • POS Full Size Mechanical Number of Contacts Mechanical life Card insertion force Card extraction force Contact force Card detection switch 8 500,000 cycles min 10N to 40N 1N min / 10N max 0,2N / 0,50N max 0,8 N max for actuation (end travel switch actuation force actuates when card is 0,9mm from card stop) 1,8 N max for complete depression Vibration Frequency 10 to 500 Hz. Acceleration 50m/s2 Duration 6 hours - amplitude 0,35mm Max elect. discontinuity 1µs Shock Peak value 500 m/s2 – Duration 11 ms 3 shocks in each direction of each axis Contact Electrical Data Insulation resistance Resistance Current rating Dielectric strength 1,000 MΩ min 100 mΩ max 10 µA min / 1 A max 750 Vrms min Switch Electrical Data Card detection switch Contact resistance Dielectric strength Current rating Maximum power Normally open 100 mΩ max 250 Vrms min 1 mA min / 10 mA max 0.2 VA Environmental Data Packaging Tray 30 parts / Cartons 300 parts Reel 120 parts Operating temperature Damp heat Salt mist Card detection switch RoHS compliant -40°C to +85°C IEC 512 test number 11c (10 days) IEC 512 test number 11f (96 hours) Sealed against dust Soldering Compatible with lead free reflow soldering process For version with security cover, please contact Customer Service for soldering recommendations. PCI Features Designation CCM02-2503LFT CCM02-2504LFT CCM02-F503LFT CCM02-F504LFT CCM02-F796LFT CCM02 F794LFT CCM02-F844LFT Termination Contact Type I/O Protect Security Cover THT SMT THT SMT SMT SMT SMT landing landing friction friction friction friction friction Yes Yes Yes Total Height (mm) 6,25 6,25 6,25 6,25 6,25 6,25 6,6 Dimension 38,5 X 55,6 38,5 X 55,6 38,5 X 55,6 38,5 X 55,6 38,5 X 55,6 38,5 X 55,6 40,5 X 58 PCB version 4 clips 4 clips 4 clips 4 clips 4 metal pegs 4 metal pegs 4 metal pegs Dimensions are shown in mm Specifications and dimensions subject to change www.ck-components.com 12 smartCard2011_6.0.qxd:2002 CCM Catalog.qxd 5/16/11 4:05 PM Page 13 CCM02 Series PCI: I/O Protect Definition Special accessory in order to avoid and detect frontal access to data contact. It is electrically connected to the PCB through spring finger contacts. Process I/O Protect locking tool C&K is proposing a manual tool to lock the I/O protect accessory after soldering. Ordering code: C-CM02-E50 PCI: Security Cover Definition It is a multilayer cover placed over the connector to avoid and detect data contact access, especially from the top. It is connected to the PCB through 6 SMT terminals that are soldered at the same time as the other smart card terminals. Process Please contact your Sales Representative for advice and recommendations about soldering this version. Specifications and dimensions subject to change www.ck-components.com 13 Full Size It must be in open position during the reflow soldering of the connector and has to be locked in closed position after soldering. smartCard2011_6.0.qxd:2002 CCM Catalog.qxd 5/16/11 4:05 PM Page 14 CCM02 Series CCM02-2503 LFT / CCM02-F503 LFT 55,6±0,2 0.65 1,6 PCB Thickness Embossed Channel 6,25 4,3±0,2 DETAIL A Scale 5 Full Size 0,95 19,12 4 Snap Feet 10x 0,3 AB 0,7 52 A 5x 2,54 4x ø 0,2 AB 2,9±0,2 3,15 (3,2) Designation & Date-Code area "CCM02" marking is optional A A-A 5,75 SEE DETAIL A Card stop 3,2 4 1±0,25 12,7 38,5 B 10 F503T XX XX 12,7 14 A Card insertion direction RECOMMENDED PC BOARD LAYOUT (Component side) 26,74 29,28 21,66 31,82 24,2 19,12 52 4,15±0,3 Card entry Plastic outline SW SW 10 0 3,2 C1 C2 C3 C4 Card end travel switch terminals F503T XX XX 7,7±0,3 20 15,7 0 3,81 3,81 12,7 12,7 (50) 14 (38,5) C5 C6 C7 C8 20 1,8 Contact location according to ISO/IEC 7816-2 ø10 +0,1 10x ø 0,1 (4x) ø 3,2 ø 0,1 +0,1 0 Dimensions are shown in mm Specifications and dimensions subject to change www.ck-components.com 14 (55,6) smartCard2011_6.0.qxd:2002 CCM Catalog.qxd 5/16/11 4:05 PM Page 15 CCM02 Series CCM02-2504 LFT / CCM02-F504 LFT Contact location according to ISO 7816-2 Dimensions are shown in mm Specifications and dimensions subject to change www.ck-components.com 15 Full Size smartCard2011_6.0.qxd:2002 CCM Catalog.qxd 5/16/11 4:05 PM Page 16 CCM02 Series CCM02-F796 LFT 55,6±0,2 0.65 2,05 6,25 54,3 4,3±0,2 Embossed Channel 0,95 0,8 2 DETAIL A Scale 5 (3,2) Full Size 4 Metal Pegs 51,5 4x ø 0,2 AB ø 1,62±0,05 0,2±0,15 2 3,2 Designation & Date-Code area "CCM02" marking is optional A 1,5 5x 2,54 0,8 SEE DETAIL A +0,4 -0,2 A-A 5,75 Card stop 6 1±0,25 B 14 F796T XX XX 10 26,35±0,3 38,5 A 10x 0,3 A 1 Pick and place area ø 13 Card insertion direction 4,15±0,3 Card entry RECOMMENDED PC BOARD LAYOUT (Component side) Plastic outline Contact foot area 0,8 x 1 Pad 14 26,49 23,95 29,03 18,87 31,57 21,41 51,5 0 1,7 SW SW 3,2 C1 C2 C3 C4 3,1 1,5 8,84 0 11,45 26,35±0,3 3,81 Card end travel switch terminals 0,8 x 1 F796T XX XX 7,7±0,3 20 15,7 12,65 10 1,5 3,81 (50) C5 C6 C7 C8 20 2,05 Contact location according to ISO/IEC 7816-2 1,3 10x 0,2 4x ø 0,1 ø 1,9 0 Metallized holes +0,1 (38,5) Dimensions are shown in mm Specifications and dimensions subject to change www.ck-components.com 16 (55,6) smartCard2011_6.0.qxd:2002 CCM Catalog.qxd 5/16/11 4:05 PM Page 17 CCM02 Series CCM02-F794 LFT DETAIL A Scale 5 2 55,6 0.65 2,05 6.25 18,87 8 0,2 Contacts security (open position) Embossed Channel 0,8 4,3 0,2 (3,2) 5x 2,54 14x 0,3 A A 4x 1 51,5 0,2 A B 1.5 2x 1,62 0,05 Metal pegs 0,8 0,2 2 0,15 A-A SEE DETAIL A Designation & Date-Code area "CCM02" marking is optional A 3,2 +0,4 -0,2 5,75 Card stop 14 26,35 1 0,3 6 15,7 0,25 10 2794T XX XX 20 A Pick and place area 13 4,15 Card insertion direction 0,3 Card entry 45 RECOMMENDED PC BOARD LAYOUT (Component side) Plastic outline 87 41 95 49 03 57 Contact foot area 0,8 x 1 Pad 14 1,7 3,1 1,5 12,65 18, 21, 23, 26 , 29, 31, 51, 5 16,9 (closed position) 38,5 B SW SW 3,2 C1C2C3C4 2794T XX XX (55,6) Card end travel 26,35 3,81 switch terminals 0.3 x 1 0,8 3,81 11,45 1,5 (51,25) (38,5) 10 C5C6C7C8 3,24 2 C5 C6 C7 C8 20 2 Piracy switch (14x) 1,3 0,2 Contacts security +0,1 1,9 0,1 0 (4x) Metallized holes Contact location according to ISO/IEC 7816-2 Dimensions are shown in mm Specifications and dimensions subject to change www.ck-components.com 17 Full Size 0,95 0 0 smartCard2011_6.0.qxd:2002 CCM Catalog.qxd 5/16/11 4:05 PM Page 18 CCM02 Series CCM02-F844a LFT / CCM02-F844b LFT 0,2±0,1 58±0,3 2,05 Embossed Channel 0,8 0,7 0,95 4,3±0,2 DETAIL B Scale 5 Full Size 0 1,6 -0,1 0,3 A 18,87 (14x) 1 (5x) 51,5 2,54 3,2 +0,4 -0,2 0,8 0,2±0,15 metal peg (4x) Ø 1,62 ± 0,05 Ø 0.2 A B SEE DETAIL B A-A 6 Card stop A A 10 Labelling : Designation & Date-Code area F844T xx xx A 26,35±0,3 B Contacts security (closed position) 3,6±0,3 Card entry 16,9 (closed position) 45º C8 P2 P4 P3 RECOMMENDED PC BOARD LAYOUT (Component side) Contact foot area metallized metallized holes (4x) Ø 1,9 Ø 0,1 A 14 3,81 18,87 21,41 23,95 26,49 29,03 31,57 10,5 38 11,3 38,8 Card end travel switch terminals C5 C6 C7 20 1±0,25 14 15,7 \Piracy switch \ P1 0 SWSW 3,1 1,7 C1 C2 C3 C4 Scale 1 Card insertion direction F844T xx xx 1,27 0 1,27 (6x) 1,3 0,05 P2 12,65 1,5 P1 11,45 1,5 P4 P3 (6x) 1,5 0,05 Protection cover terminals 3,81 3,81 C5 C6 C7 C8 Plastic outline 2 3,24 20 Contact location according to ISO/IEC 7816-2 1,3 0,2 (50) (40,5) 0 Please don't apply any solder paste on these 4 pads 37,2 51,5 9,7 Dimensions are shown in mm Specifications and dimensions subject to change www.ck-components.com 18 (58)