CCM02-2508LFTT30

CCM02 MK2 Series Features Typical Applications • Operating life 500,000 cycles • Transaction • Insertion force 40N • Identification • EMV • POS • PCI & PCI ready Full Size • Card detection sealed switch Mechanical Contact Electrical Data Number of Contacts 8 Mechanical life 500,000 cycles min Card insertion force 10N to 40N Card extraction force 1N min / 10N max Contact force 0,2N / 0,50N max Card detection switch 0,8 N max for actuation (end travel switch actuation force actuates when card is 0,9mm from card stop) 1,8 N max for complete depression Vibration Frequency 10 to 500 Hz. Acceleration 50m/s2 Duration 6 hours - amplitude 0,35mm Max elect. discontinuity 1µs Shock Peak value 500 m/s2 – Duration 11 ms 3 shocks in each direction of each axis Insulation resistance Resistance Current rating Dielectric strength Packaging Tray 30 parts / Cartons 300 parts Reel 120 parts 1,000 MΩ min 100 mΩ max 10 µA min / 1 A max 750 Vrms min Switch Electrical Data Card detection switch Contact resistance Dielectric strength Current rating Maximum power Normally open 100 mΩ max 250 Vrms min 1 mA min / 10 mA max 0.2 VA Environmental Data Soldering Compatible with lead free reflow soldering process For version with security cover, please contact Customer Service for soldering recommendations. Operating temperature Damp heat -40°C to +85°C Salt mist IEC 512 test number 11f (96 hours) Card detection switch RoHS compliant Sealed against dust IEC 512 test number 11c (10 days) PCI Features Designation Termination Contact Type I/O Protect Security Cover Total Height (mm) Dimension PCB version Packaging CCM02-2503LFT THT landing 6,25 38,5 X 55,6 4 clips Tray CCM02-2504LFT SMT landing 6,25 38,5 X 55,6 4 clips Tray CCM02-2508LFT SMT landing 6,25 38,5 X 55,6 4 clips Tray CCM02-F508LFT SMT friction 6,25 36,5 X 55,6 2 plastic pegs Tray CCM02-F844LFT SMT friction Yes 6,6 40,5 X 58 4 metal pegs Tray / Reel CCM02-F788LFT SMT friction Yes 6,25 38,5 X 55,6 2 plastic pegs Tray Yes Dimensions are shown in mm Specifications and dimensions subject to change 11 Nov 19 www.ckwitches.com     14 CCM02 MK2 Series PCI: I/O Protect Definition Special accessory in order to avoid and detect frontal access to data contact. It is electrically connected to the PCB through spring finger contacts. Process It must be in open position during the reflow soldering of the connector and has to be locked in closed position Full Size after soldering. I/O Protect locking tool C&K is proposing a manual tool to lock the I/O protect accessory after soldering. Ordering code: C-CM02-E50 PCI: Security Cover Definition It is a multilayer cover placed over the connector to avoid and detect data contact access, especially from the top. It is connected to the PCB through 6 SMT terminals that are soldered at the same time as the other smart card terminals. Process Please contact your Sales Representative for advice and recommendations about soldering this version. 11 Nov 19 Specifications and dimensions subject to change www.ckwitches.com     15 CCM02 MK2 Series CCM02-2503 LFT 55,6±0,2 DETAIL A Scale 5 A B 0,3 2,54 4x 0,7 (3,2) 5x 3,15 19,12 10x 4 Snap Feet 0,95 6,25 4,3±0,2 Embossed Channel ø 0,2 A B 2,9±0,2 52 A A-A 5,75 Designation & Date-Code area "CCM02" marking is optional SEE DETAIL A Card stop 14 15,7 12,7 B 10 12,7 4 1±0,25 3,2 A 38,5 7,7±0,3 20 F503T XX XX A Card insertion direction 4,15±0,3 Card entry 52 31,82 29,28 24,2 26,74 21,66 19,12 RECOMMENDED PC BOARD LAYOUT (Component side) 0 Plastic outline SW SW 3,2 C1 C2 C3 C4 Card end travel switch terminals (55,6) 12,7 10 12,7 0 F503T XX XX 3,81 3,81 Full Size 1,6 PCB Thickness 0.65 (50) (38,5) 14 C5 C6 C7 C8 20 +0,1 ø10 1,8 10x ø 0,1 (4x) ø 3,2 +0,1 0 ø 0,1 Contact location according to ISO/IEC 7816-2 Dimensions are shown in mm Specifications and dimensions subject to change 11 Nov 19 www.ckwitches.com     17 CCM02 MK2 Series Full Size CCM02-2504 LFT Contact location according to ISO 7816-2 Dimensions are shown in mm Specifications and dimensions subject to change 11 Nov 19 www.ckwitches.com     17 CCM02 MK2 Series CCM02-2508 LFT / CCM02 F508 LFT 0,8 2 (3,2) 6,25 1,6 0 -0.1 2x 3,1 0,2 A B 2 Pegs 0,2 0,15 51,5 2 A 15,7 Card stop 27,5 0,3 3,2+0,4 -0,2 14 B A-A 5,75 6 1 0,25 SEE DETAIL A Designation & Date-Code area "CCM02" marking is optional A 10x A 0,3 A Card insertion direction Pick and place area 13 1 7,7 0,3 F508T XX XX 20 10 38,5 4,15 0,3 Card entry 8.84 3,813,81 25,3 (55,6) 51,5 3,2 Card end travel switch terminals 0,8 x 1 (50) (38,5) 1,5 10 F508T XX XX 0 27,5 0,3 1,7 SW SW C1C2C3C4 1,5 14 3,1 Plastic outline Contact foot area 0,8 x 1 Pad 18,87 21,41 23,95 26,49 29,03 31,57 RECOMMENDED PC BOARD LAYOUT (Component side) 0 Full Size 5x 2,54 18,87 DETAIL A Scale 5 0,8 Embossed Channel 2,05 0,95 54,3 0,65 4,3 0,2 55,6 0,2 C5C6C7C8 20 2,05 1,3 10x 0,2 2x 0,1 3,2+0,1 0 Contact location according to ISO/IEC 7816-2 Dimensions are shown in mm Specifications and dimensions subject to change 11 Nov 19 www.ckwitches.com     19 CCM02 MK2 Series CCM02-F844A LFT / CCM02-F844B LFT DETAIL B Scale 5 0,8 58±0,3 2 9 0,2±0,1 (5x) 2,54 metal peg (4x) 1,62±0,05 0.2 A B 51,5 A A-A 6 6 1±0,25 15,7 20 F844T xx xx 16,9 (closed position) B 10 Labelling : Designation & Date-Code area 26,35±0,3 SEE DETAIL B 14 A 0,2±0,15 2 18,87 Full Size (14x) 1 0 1,6-0,1 0,3 A 0,8 Embossed Channel 3,2+0,4 -0,2 2,05 0,95 4,3±0,2 0,7 Contacts security (closed position) A 45° 3,6±0,3 Card entry RECOMMENDED PC BOARD LAYOUT (Component side) 3,1 1,7 3,81 3,81 P2 0 3,24 20 (6x) 1,5 0,05 C5 C6 C7 C8 2 1,5 0,05 11,45 P1 Card insertion direction P4 P3 F844T xx xx (6x) 1,3 1,27 (Piracy switch) C1C2 C3 C4 12,65 1,5 3,81 1,27 P4 P3 P2 P1 Card end travel switch terminals SW SW 14 Protection cover terminals 1,3 Plastic outline (50) ( 40,5) 51,5 Please don't apply any solder paste on these 4 pads 37,2 9,7 0,2 0 Contact location according to ISO/IEC 7816-2 38,8 ( 58) 11,3 C5 C6 C7 C8 38 18,87 21,41 23,95 26,49 29,03 31,57 10,5 metallized holes (4x) 1,9 0,1 A 0 Contact foot area Dimensions are shown in mm Specifications and dimensions subject to change 11 Nov 19 www.ckwitches.com     19 CCM02 MK2 Series Full Size CCM02-F788 LFT Dimensions are shown in mm Specifications and dimensions subject to change 11 Nov 19 www.ckwitches.com     21