CCM03

smartCard2011_6.0.qxd:2002 CCM Catalog.qxd 5/16/11 4:05 PM Page 28 CCM03 Series Features • SIM/SAM card acceptance • Hinged and fixed covers • Compatible with pick and place and lead free soldering Typical Applications • Handheld products • Identification • POS • Automotive Mechanical Number of Contacts Mechanical life, hinged cover Mechanical life, fixed cover Card insertion force Card extraction force Contact force Slide locking force Vibration Frequency Max electrical discontinuity Shock 6 or 8 10,000 cycles min 50,000 cycles Hinged cover: 1N max Fixed cover: 3N max Hinged cover: 1N max Fixed cover: 0,80N min / 3N max 0,25N min / 0,50N max 2N min / 6N max 1,8N max. for complete depression 10 to 500 Hz. Acceleration 50m/s2 Duration 6 hours - amplitude 0,35 mm 1µs Peak value 500 m/s2 – Duration 11 ms 3 shocks in each direction of each axis Switch Electrical Data Card detection switch Contact resistance Dielectric strength Current rating Maximum power Normally open 100 mΩ max 250 Vrms min 1 mA min / 10m A max 0.2 VA Environment Data Operating temperature Damp heat Salt mist RoHS compliant -40°C to +85°C IEC 512 test number 11c (10 days) IEC 512 test number 11f (96 hours) SIM/SAM Soldering Process Compatible with lead free SMT soldering process Contact Electrical Data Insulation resistance Resistance Current rating Dielectric strength 1,000 MΩ min 100 mΩ max 10 µA min / 1 A max 750 Vrms min Designation CCM03-3001LFT CCM03-3002LFT CCM03-3003LFT CCM03-3004LFT CCM03-3009LFT CCM03-3010LFT CCM03-3011LFT CCM03-3012LFT CCM03-3013LFT CCM03-3512LFT CCM03-3519LFT CCM03-3518LFT CCM03-3504LFT CCM03-3505LFT CCM03-3535LFT CCM03-3754LFT CCM03-3760LFT CCM03-3764LFT Contact Plating inlay inlay inlay inlay gold gold gold gold gold gold gold gold gold gold inlay inlay inlay inlay # of Cover Contacts hinged hinged hinged hinged hinged hinged hinged hinged hinged hinged hinged hinged fixed fixed fixed fixed fixed none 6 6 8 8 6 6 8 8 6 6 6 6 8 6 6 6 6 6 PCB Version Card End Operating Total Height Dim. (mm) Travel Life (mm) Switch without 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 50,000 50,000 50,000 10,000 10,000 10,000 2,55 2,55 2,55 2,55 2,55 2,55 2,55 2,55 2,55 2,55 2,55 2,2 2,85 2,85 2,85 3,5 3,45 2,9 17,2 x 29,65 17,2 x 29,65 17,2 x 29,65 17,2 x 29,65 17,2 x 29,65 17,2 x 29,65 17,2 x 29,65 17,2 x 29,65 17,2 x 29,65 17,2 x 29,65 17,2 x 29,65 18 x 29,65 17,2 x 25,5 17,2 x 25,5 17,2 x 25,5 16,5 x 18,05 16,5 x 15,85 16,5 x 15,85 without without Packaging reels of 1,000 pcs reels of 1,000 pcs reels of 1,000 pcs reels of 1,000 pcs reels of 1,000 pcs reels of 1,000 pcs reels of 1,000 pcs reels of 1,000 pcs reels of 1,000 pcs reels of 1,000 pcs reels of 1,000 pcs reels of 1,000 pcs reels of 1,000 pcs reels of 1,000 pcs reels of 1,000 pcs reels of 1,000 pcs reels of 1,000 pcs reels of 1,000 pcs 2 plastic pegs 2 plastic pegs without without 2 plastic pegs without without 2 plastic pegs without without without without without without without without with without with C E 28 smartCard2011_6.0.qxd:2002 CCM Catalog.qxd 5/16/11 4:05 PM Page 29 CCM03 Series CCM03-3001 LFT / CCM03-3009 LFT 25,5±0,2 2,1 13,15 2x 2,54 1,27 MICROSIM CARD 0,4 2,55 (2,7 max. includes solder tails) 9,65 A 8,6 3,7 180?max 0,3 A 1 6x 0,7 25˚ 1,3 28 Mated condition 3,813,81 25 ,4 ±0 ,2 ,4 (2 (25,5) (29,65) 0,1 0 -0,1 (17,2) SEE DETAIL A 29,65 5,65±0,2 3,5 Slider locked 13,8 2,45 R 1,9 1,25 DETAIL A Scale 5 5) 4 0, 1,25 0,65 0,8 (25,5) 2 Bump 11,25 17,2 (15) Pick and place area ø 3,5 XX-XXX R 1,9 3,81 3,8 Date Code area RECOMMENDED PC BOARD LAYOUT (Component side) Plastic outline Contact foot area 0,8 x 1 Pad 8,6 C5 C6 C7 2x 2,54 1,5 23,2 5,5 2,5 5,5 1,8 1,5 1,55 C1 C2 C3 1,27 Prohibited area Contact location according to ENV1375-1 & GSM11-11 3,813,81 25,5 9,34 6x 0,2 1,3 Dimensions are shown in mm Specifications and dimensions subject to change www.ck-components.com 29 SIM/SAM smartCard2011_6.0.qxd:2002 CCM Catalog.qxd 5/16/11 4:05 PM Page 30 CCM03 Series CCM03-3002 LFT / CCM03-3010 LFT 25,5±0,2 2,1 B 13,15 0,4 2x 2,54 1,27 2,55 (2,7 max. includes solder tails) 10,16 5,08 9,65 A MICROSIM CARD 8,6 180˚max 3,7 1 10,16 20,32 0,3 A 1,25 0,7 SEE DETAIL A ø1±0,05 2x ø 0,1 A B (25,5) 0,1 0 -0,1 (29,65) SIM/SAM 29,65 5,65±0,2 3,5 Slider locked 13,8 2,45 R 1,9 1,25 DETAIL A Scale 5 2 0,65 0,8 (25,5) Bump 11,25 17,2 (15) XX-XXX Pick and place area ø 3,5 R 1,9 3,81 3,8 Date Code area RECOMMENDED PC BOARD LAYOUT (Component side) 1,5 Plastic outline Contact foot area 0,8 x 1 Pad 8,6 23,2 20,32 ø 1,2 ø 0,1 5,5 2,5 5,5 1,8 +0,1 2x 0 1,5 1,44 2x 2,54 1,27 6x 0,2 1,3 C5 C6 C7 C1 C2 C3 10,16 5,08 (17,2) 25˚ 1,3 0,7 Mated condition 3,813,81 25 ,4 ± 6x 0, 2 28 ,4 (2 0, 4 5) Prohibited area Contact location according to ENV1375-1 & GSM11-11 3,813,81 6,35 9,34 25,5 Cont ENV Dimensions are shown in mm Specifications and dimensions subject to change www.ck-components.com 30 smartCard2011_6.0.qxd:2002 CCM Catalog.qxd 5/16/11 4:05 PM Page 31 CCM03 Series CCM03-3003 LFT 25,5±0,2 2,1 13,15 0,4 3x 2,54 1,27 2,55 (2,7 max. includes solder tails) 9,65 A MICROSIM CARD 8,6 180?max 1 3,7 0,3 A 1,3 28 ,4 0,7 25˚ Mated condition 3,813,81 25 ,4 ±0 ,2 8x (2 5) 4 0, (17,2) (29,65) SEE DETAIL A 29,65 5,65±0,2 3,5 Slider locked Bump 13,8 2,45 R 1,9 1,25 (25,5) DETAIL A Scale 5 1,25 0,65 0,8 (25,5) 2 11,25 17,2 Pick and place area ø 3,5 XX-XXX R 1,9 3,81 3,8 Date Code area RECOMMENDED PC BOARD LAYOUT (Component side) Plastic outline Contact foot area 0,8 x 1 Pad 8,6 C5 C6 C7 C8 3x 2,54 3,813,81 25,5 9,34 1,5 23,2 5,5 2,5 5,5 1,8 1,5 1,55 1,27 Prohibited area Contact location according to ENV1375-1 & GSM11-11 8x 0,2 C1 C2 C3 C4 1,3 Dimensions are shown in mm Specifications and dimensions subject to change www.ck-components.com 31 (15) SIM/SAM 0,1 0 -0,1 smartCard2011_6.0.qxd:2002 CCM Catalog.qxd 5/16/11 4:05 PM Page 32 CCM03 Series CCM03-3004 LFT 25,5±0,2 2,1 B 0,4 3x 2,54 13,15 1,27 A MICROSIM CARD 2,55 (2,7 max. includes solder tails) 10,16 5,08 9,65 8,6 180˚max 4 0, 3,7 10,16 20,32 0,3 A 1 8x 1,3 25˚ SEE DETAIL A 29,65 1,25 0,7 ø1±0,05 2x ø 0,1 A B (25,5) 0 0,1 -0,1 (29,65) DETAIL A Scale 5 13,8 SIM/SAM 5,65±0,2 3,5 Slider locked 2,45 R 1,9 1,25 0,65 2 0,8 (25,5) Bump 11,25 17,2 Pick and place area ø3,5 (15) XX-XXX R 1,9 3,81 3,8 Date Code area RECOMMENDED PC BOARD LAYOUT (Component side) 1,5 Plastic outline Contact foot area 0,8 x 1 Pad 8,6 5,08 C5 C6 C7 C8 3x 2,54 3,813,81 6,35 9,34 25,5 23,2 20,32 2x +0,1 ø 1,2 0 ø 0,1 5,5 2,5 5,5 1,8 1,5 1,44 1,27 0,2 C1 C2 C3 C4 10,16 1,3 (17,2) 0,7 Mated condition 3,813,81 25 ,4 ±0 , 2 28 ,4 (2 5 ) Prohibited area Contact location according to ENV1375-1 & GSM11-11 C E 8x Dimensions are shown in mm Specifications and dimensions subject to change www.ck-components.com 32 smartCard2011_6.0.qxd:2002 CCM Catalog.qxd 5/16/11 4:05 PM Page 33 CCM03 Series CCM03-3011 LFT 25,5±0,2 2,1 13,15 0,4 3x 2,54 1,27 2,55 (2,7 max. includes solder tails) 9,65 A MICROSIM CARD 180˚ max 3,7 1 0,3 A 8x 0,7 1,3 25˚ 28 SEE DETAIL A 29,65 5,65±0,2 3,5 Slider locked 13,8 2,45 R 1,9 1,25 (25,5) DETAIL A Scale 5 (29,65) 0,1 0 -0,1 (17,2) Mated condition 3,813,81 25 ,4 ±0 ,2 ,4 (2 0, 4 5) 1,25 0,65 0,8 (25,5) 2 Bump 11,25 17,2 Pick and place area ø 3,5 (15) XX-XXX R 1,9 3,81 3,8 Date Code area RECOMMENDED PC BOARD LAYOUT (Component side) Plastic outline Contact foot area 0,8 x 1 Pad 8,6 C5 C6 C7 C8 3x 2,54 3,813,81 25,5 9,34 1,5 5,5 23,2 2,5 1,5 5,5 1,8 1,55 1,27 Prohibited area Contact location according to ENV1375-1 & GSM11-11 8x 0,2 C1 C2 C3 C4 1,3 Dimensions are shown in mm Specifications and dimensions subject to change www.ck-components.com 33 SIM/SAM smartCard2011_6.0.qxd:2002 CCM Catalog.qxd 5/16/11 4:05 PM Page 34 CCM03 Series CCM03-3012 LFT 25,5±0,2 2,1 B 13,15 0,4 3x 2,54 1,27 A MICROSIM CARD 2,55 (2,7 max. includes solder tails) 10,16 5,08 9,65 8,6 180˚max 4 0, 3,7 10,16 20,32 0,3 A 1 8x 1,3 25˚ SEE DETAIL A 1,25 0,7 ø1±0,05 2x ø 0,1 A B (25,5) 0 0,1 -0,1 (29,65) SIM/SAM 29,65 5,65±0,2 3,5 Slider locked 13,8 2,45 R 1,9 1,25 DETAIL A Scale 5 2 0,65 0,8 (25,5) Bump 11,25 17,2 (17,2) 0,7 Mated condition 3,813,81 25 ,4 ±0 ,2 28 ,4 (2 5 ) Pick and place area ø 3,5 XX-XXX R 1,9 3,81 3,8 Date Code area RECOMMENDED PC BOARD LAYOUT (Component side) 1,5 Plastic outline Contact foot area 0,8 x 1 Pad 8,6 5,08 23,2 20,32 2x +0,1 ø 1,2 0 ø0,1 5,5 2,5 5,5 1,8 1,5 1,44 1,27 3x 2,54 Prohibited area Contact location according to ENV1375-1 & GSM11-11 3,813,81 6,35 9,34 25,5 8x 0,2 C5 C6 C7 C8 C1 C2 C3 C4 10,16 1,3 Dimensions are shown in mm Specifications and dimensions subject to change www.ck-components.com 34 (15) smartCard2011_6.0.qxd:2002 CCM Catalog.qxd 5/16/11 4:05 PM Page 35 CCM03 Series CCM03-3013 LFT 25,5±0,2 2,1 13,15 0,4 3x 2,54 1,27 2,55 (2,7 max. includes solder tails) 9,65 A MICROSIM CARD 8,6 180˚max 0, 4 3,7 0,3 A 1 8x 0,7 25˚ 1,3 SEE DETAIL A 29,65 5,65±0,2 3,5 Slider locked 13,8 2,45 R 1,9 1,25 (25,5) 1,25 0,65 0,8 (25,5) XX-XXX 2 Plastic actuator 11,25 17,2 Pick and place area ø 3,5 R 1,9 3,81 3,8 Date Code area RECOMMENDED PC BOARD LAYOUT (Component side) Plastic outline Contact foot area 0,8 x 1 Pad 8,6 C5 C6 C7 SW 3x 2,54 3,813,81 25,5 9,34 1,5 5,5 23,2 2,5 1,5 5,5 1,8 1,55 (17,2) 1,27 Prohibited area Contact location according to ENV1375-1 & GSM11-11 8x 0,2 C1 C2 C3 SW 1,3 (29,65) Dimensions are shown in mm Specifications and dimensions subject to change www.ck-components.com 35 (15) SIM/SAM 0 0,1 -0,1 DETAIL A Scale 5 DETAIL insulated blade switch Scale 5 28 Mated condition 3,81 3,81 25 ,4 ±0 ,2 ,4 (2 5) smartCard2011_6.0.qxd:2002 CCM Catalog.qxd 5/16/11 4:05 PM Page 36 CCM03 Series CCM03-3512 LFT 26,9±0,2 2,1 13,15 (0,3) 2x 2,54 1,27 9,65 A MICROSIM CARD 180˚max 1 0 ,4 3,7 2,55 (2,7 max. includes solder tails) A 7,33±0,05 0,3 6x 0,7 25˚0' 0,85 1,3 28, Mated condition 3,81 3,81 25, 4± 0,2 4 (25) 1,25 SEE DETAIL A 29,65 (26,9) DETAIL A Scale 5 (29,65) (29,95) 0 -0,1 SIM/SAM 5,65±0,2 3,5 Slider locked 2,45 13,8 R 1,9 1,25 0,65 1,5 (26,9) 0,1 2 Bump 11,25 17,2 Pick and place area ø 3,5 (15) XX-XXX R 1,9 3,81 3,8 Date Code area RECOMMENDED PC BOARD LAYOUT (Component side) Plastic outline Contact foot area 1,5 x 1 Pad 8,6 C5 C6 C7 2x 2,54 1,95 23,5 1,95 1,4 5,5 2,5 5,5 1,8 C1 C2 C3 1,27 3,81 26,9 3,81 9,34 Prohibited area Contact location according to ENV1375-1 & GSM11-11 6x 0,05 1,3 Dimensions are shown in mm Specifications and dimensions subject to change www.ck-components.com 36 (17,2) smartCard2011_6.0.qxd:2002 CCM Catalog.qxd 5/16/11 4:05 PM Page 37 CCM03 Series CCM03-3519 LFT 25,5±0,2 2,1 13,15 0,4 2x 2,54 1,27 MICROSIM CARD A 2,55 (2,7 max. includes solder tails) 9,65 8,6 3,7 180˚max 4 0, 0,3 A 1 6x 0,7 25˚ 1,3 SEE DETAIL A 29,65 5,65±0,2 3,5 Slider locked 13,8 2,45 R 1,9 1,25 (25,5) DETAIL A Scale 5 0,1 0 -0,1 28 ,4 Mated condition 3,81 3,81 25 ,4 ± 0, 2 (2 5) 1,25 0,65 0,8 (25,5) 2 Bump 11,25 17,2 Pick and place area ø3,5 (15) XX-XXX R 1,9 3,81 3,8 Date Code area RECOMMENDED PC BOARD LAYOUT (Component side) Plastic outline Contact foot area 0,8 x 1 Pad 8,6 C5 C6 C7 2x 2,54 1,5 5,5 23,2 2,5 1,5 5,5 1,8 1,55 C1 C2 C3 0,2 1,3 1,27 (29,65) 3,813,81 25,5 9,34 Prohibited area Contact location according to ENV1375-1 & GSM11-11 6x (17,2) Dimensions are shown in mm Specifications and dimensions subject to change www.ck-components.com 37 SIM/SAM smartCard2011_6.0.qxd:2002 CCM Catalog.qxd 5/16/11 4:05 PM Page 38 CCM03 Series CCM03-3518 LFT 24,6±0,2 3x 2,54 5,1 11,8 11,8 0,5 DETAIL A Insulated blade switch Scale 10 Plastic actuator 0,1 +0,05 -0,1 2 Blade switch (24,6) 1 OPEN OPEN Manual 1 opening 25,2 Card withdrawal 2 from the base 2,8 4,4 3,2 4,4 0,95 CARD WITHDRAWAL RECOMMENDED PC BOARD LAYOUT (Component side) Plastic outline Contact foot area 1 x 1 1,05 Pad T2 7 1,5 5 10,6 5,5 22,1 2,5 5,5 1,8 1,5 1,7 Manual 2 closing 1,4 C1 C2 C3 SW 8x T'2 7 OPEN 0,2 Card insertion 1 onto the base CARD INSERTION Dimensions are shown in mm Specifications and dimensions subject to change 11,17 8,45 2,86 2,2 max (on metal cover) 2,1 max (on insulator) LOCKED SEE DETAIL A 1,27 7,24 17 A SIM/SAM 29,65 Pick and place area ø3,2 18 max during opening Date Code area 8x 10,5 3,81 3,81 24,6 2,3 2,4 UNLOCKED 8,45 19,1 C5 C6 C7 SW 1,27 Contact location according to ENV1375-1 & GSM 11-11 Prohibited area 3x 2,54 2 2x 0,3 A 1 www.ck-components.com 38 smartCard2011_6.0.qxd:2002 CCM Catalog.qxd 5/16/11 4:05 PM Page 39 CCM03 Series CCM03-3504 LFT / CCM03-3505 LFT 25,5±0,2 3x 2,54 12,75 2,5 2,85 (3 max includes solder tails) 1,27 A 8,6 2,54 12,7 10,16 Mated condition SEE DETAIL A 3,81 3,81 0,3±0,02 0,3 A DETAIL A Scale 5 40˚ 0,2 8x 1 0,8 0,4 0,4 2 2,45 2,65 0 0,1 -0,1 0,8 (25,5) 30˚ B 12,1 25,5 1,25±0,05 +0,05 ø 1,4 0 17,2±0,05 A A XX-XXX ø1,6 1,9 Date Code area B 12,9 21,55 2,3 1,4 +0,05 0 0,75 RECOMMENDED PC BOARD LAYOUT (Component side) Plastic outline Contact foot area 0,8 x 1 Pad 8,6 1,5 23,2 +0,05 ø 1,4 0 2x 5,5 2,5 5,5 1,8 1,5 1,44 2,54 C5 C6 C7 C8 3x 2,54 C1 C3 C4 8x 12,7 1,3 C2 (17,2) 0,2 (3,45) (9,75) 1,27 (25,5) Prohibited area Contact location according to ENV1375-1 & GSM11-11 3,81 3,81 25,5 6,35 Dimensions are shown in mm Specifications and dimensions subject to change www.ck-components.com 39 SIM/SAM Pick and place area ø 3,5 Card stop 0,15 min 15,2 +0,1 0 smartCard2011_6.0.qxd:2002 CCM Catalog.qxd 5/16/11 4:05 PM Page 40 CCM03 Series CCM03-3535 LFT 25,5±0,2 12,75 2,5 2x 2,54 1,27 A 8,6 2,85 (3 max includes solder tails) A 1 2,54 12,7 0,3±0,02 10,16 0,3 6x Mated condition 0,4 0,4 DETAIL A Scale 5 40˚0' 0,2 3,81 0,8 3,81 SEE DETAIL A 2 2,65 0,1 0 -0,1 0,8 (25,5) 30˚0' B ø 3,5 12,1 25,5 1,25±0,05 2,45 SIM/SAM Pick and place area Card stop +0,05 0 0,15 min ø 1,4 17,2±0,05 +0,1 0 15,2 A XX-XXX 1,9 A ø 1,6 Date Code area B 12,9 21,55 2,3 1,4 +0,05 0 0,75 RECOMMENDED PC BOARD LAYOUT (Component side) Plastic outline Contact foot area 0,8 x 1 Pad 1,8 1,5 23,2 ø 1,4 0 2x 2,5 5,5 +0,05 1,5 1,44 2,54 5,5 8,6 1,3 C6 C7 1,27 2x 2,54 C2 C3 12,7 (3,45) (9,75) (25,5) Prohibited area Contact location according to ENV1375-1 & GSM11-11 3,81 25,5 3,81 6,35 6x 0,2 Dimensions are shown in mm Specifications and dimensions subject to change www.ck-components.com 40 (17,2) C5 C1 smartCard2011_6.0.qxd:2002 CCM Catalog.qxd 5/16/11 4:05 PM Page 41 CCM03 Series CCM03-3754 LFT 0,25± 0,05 x 45˚ A-A 0,2±0,05 Mated condition 0,4 3,81 3,81 6F 0 0,1 -0,1 DETAIL A SEE DETAIL A Date code updated 2 0,8 14,25±0,2 11,8 5,9 Pick and place area ø 3,5 0,3 A 2,4 2,4 1,9 +0,05 0 0,85 +0,10 -0,15 0,6 3,8±0,2 (14,25) (3,8) 0,8 2 (9,9) (15,85) 8,15 6x (4,34) 11,1 16,5 2,54 0,95±0,2 A A 6,05 1 15,3 0,9±0,25 7 A Card stop 2,54 1,27 0,7 (16,5) 2,5 (2) XXXX 4,9 15,1 9,2 2x 3,05 3,5 Date Code area 0,75 +0,10 -0,05 RECOMMENDED PC BOARD LAYOUT (Component side) Plastic outline Contact foot area 0,8 x 0,7 Pad 1,5 11,95 1,5 0,075 3,8 1,5 8,15 C5 C6 C1 C2 C3 SW SW 8x 0,2 2,54 2,54 C7 2,54 1,27 2,54 3,81 Contact location according to ENV1375-1 & GSM11-11 5,9 14,25 3,81 2,165 Switch contact foot area 0,8 x 1 3,8 1,3 Dimensions are shown in mm Specifications and dimensions subject to change www.ck-components.com 41 SIM/SAM 2,54 0,3 A 2,54 1,27 R1 smartCard2011_6.0.qxd:2002 CCM Catalog.qxd 5/16/11 4:05 PM Page 42 CCM03 Series CCM03-3760 LFT COUPE A-A 0,25 ± 0,05 x 45˚ Mated condition 0,2±0,05 3,81 0,4 3,81 0 -0,1 DETAIL A SEE DETAIL A 2 0,8 14,25±0,2 11,8 5,9 Pick and place area ø 3,5 A 2,4 2,4 0,6 1,9 +0,05 0 0,1 (9,9) (14,25) (15,85) 0,75 6x 0,7 8,15 (4,34) 0,3 16,5 Card stop 2,54 15,3 SIM/SAM A 2,54 11,1 A A 2,5 6,05 (7,08) XXXX 4,9 15,1 9,2 0,75 +0,10 -0,05 1,27 1,27 Date Code area 3,05 RECOMMENDED PC BOARD LAYOUT (Component side) Plastic outline Contact foot area 0,8 x 0,7 Pad 0,075 8,15 C5 C6 2,54 C7 1,27 C1 C2 C3 0,2 1,3 1,5 11,95 1,5 2,54 3,81 Contact location according to ENV1375-1 & GSM11-11 5,9 14,25 3,81 2,165 6x Dimensions are shown in mm Specifications and dimensions subject to change www.ck-components.com 42 (16,5) R1 smartCard2011_6.0.qxd:2002 CCM Catalog.qxd 5/16/11 4:05 PM Page 43 CCM03 Series CCM03-3764 LFT 0,25 ± 0,05 x 45˚ Mated condition 3,81 3,81 6 SEE DETAIL A F 0 -0,1 0,1 2 2 0,8 14,25±0,2 11,8 5,9 Pick and place area ø 3,5 A 0,8 (3,8) (9,9) (15,85) 3,8±0,2 (14,25) 1,9 +0,05 0 0,75 0,6 8,15 6x (4,34) 0,3 Top card level recommended 16,5 0,9 ±0,25 0,95±0,2 A 7 A 2,54 2,54 11,1 1,27 Card stop 0,7 0,95 +0,1 0 15,3 (16,5) A XXXX 2x 4,9 15,1 9,2 0,3 Date Code area 2,9 0,75 +0,10 -0,05 Plastic outline Contact foot area 0,8 x 0,7 Pad RECOMMENDED PC BOARD LAYOUT (Component side) 1,5 11,95 1,5 0,075 C5 C6 C1 C2 C3 SW 8x 0,2 3,8 1,5 2,54 2,54 8,15 C7 2,54 1,27 2,54 SW Switch contact foot area 0,8 x 1 3,81 Contact location according to ENV1375-1 & GSM11-11 5,9 14,25 3,81 2,165 3,8 1,3 (2) Dimensions are shown in mm Specifications and dimensions subject to change www.ck-components.com 43 SIM/SAM 2,54 A 2,5 6,05 2,54 1 1,27