CL101J7S205DQA7

CL Series Single Pole Power Rocker Switches Features/Benefits • Illuminated versions available • Positive detent • Snap-in mounting Typical Applications • Floor care products • Power outlet strips • HVAC units • RoHS compliant Models Available Specifications CONTACT RATING: UL/CSA: 16 AMPS @ 125 VAC, 1/3 HP; 10 AMPS @ 250 VAC, 1/2 HP. ELECTRICAL LIFE: 10,000 make and break cycles at full load. INSULATION RESISTANCE: 108 Ω min. DIELECTRIC STRENGTH: 1,500 VRMS @ sea level. OPERATING TEMPERATURE: -20ºC to +80ºC Materials HOUSING AND ACTUATOR: 6/6 nylon (UL94V-2), black, matte finish. ILLUMINATED ACTUATOR: Polycarbonate, matte finish. CENTER CONTACTS: Silver plated, copper alloy. END CONTACTS: Silver plated. ALL TERMINALS: Silver plated, copper alloy. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages G–91 through G–93. For additional options not shown in catalog, consult Customer Service Center. Switch CL101 CL102 CL12 * Function SPDT On-None-On SPST On-None-Off SPST On-None-Off Actuator J7 Rocker J9 Illuminated rocker Actuator Color 2 Black 1 White 3 Red R Red, illuminated A Amber, illuminated G Green, illuminated Mounting Style/Color S2 Snap-in, black S1 Snap-in, white Termination 05 .250” quick connect Actuator Marking (NONE) No marking D ON-OFF H ”O l” - international ON-OFF P ”O -” international ON-OFF Contact Rating QA Silver Lamp Rating (NONE) No lamp 7 125 VAC neon 8 250 VAC neon Rocker * CL12 - for switches with both marking and illumination G G–90 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com CL Series Single Pole Power Rocker Switches SWITCH FUNCTION SWITCH FUNCTION Pos. 1 Pos. 2 Pos. 3 Pos. 1 CONNECTED TERMINALS Pos. 2 Pos. 3 NO. POLES MODEL NO. C&K marking on opposite side C&K marking on opposite side SCHEMATIC CL101 ON NONE ON 2-1 N/A 2-3 SP CL102 ON NONE OFF 2-1 OPEN OR For Illuminated Version CL12 * ON NONE OFF * CL12 - for switches with both marking and illumination Shown in Pos. 1 ACTUATOR J7 ROCKER J9 ILLUMINATED ROCKER NOTE: J9 actuator available with CL102 & CL12 switch function only. ACTUATOR COLOR OPTION CODE ACTUATOR COLOR BLACK WHITE RED RED, ILLUMINATED AMBER, ILLUMINATED GREEN, ILLUMINATED Rocker 2 1 3 R A G Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G–91 www.ck-components.com G CL Series Single Pole Power Rocker Switches MOUNTING STYLE/COLOR S2 S1 SNAP-IN, BLACK SNAP-IN, WHITE PANEL MOUNTING PANEL THICKNESS 0.030-0.049 (0,75-1,25) 0.049-0.079 (1,25-2,0) 0.079-0.118 (2,0-3,0) “X” 1.126-.004 (28,6-0,1) 1.134-.004 (28,8-0,1) 1.150-.004 (29,2-0,1) “Y” 0.551+.004 (14,0+0,1) 0.551+.004 (14,0+0,1) 0.551+.004 (14,0+0,1) Shown in Pos. 1 TERMINATION 05 .250” QUICK CONNECT Shown in Pos. 1 ACTUATOR MARKING NONE NO MARKING D ON-OFF Rocker H Ol P O- NOTE: Orientation of actuator marking and terminals. Shown in Pos. 1 G G–92 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com CL Series Single Pole Power Rocker Switches CONTACT MATERIAL OPTION CODE CONTACT AND TERMINAL MATERIAL SILVER POWER RATINGS 16 AMPS @ 125 VAC; 1/3 HP; 10 AMPS @ 250 VAC, 1/2 HP QA * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. LAMP RATING (NONE) NO LAMP 7 125 VAC 33kΩ NEON 8 250 VAC 150kΩ NEON NOTE: Lamp rating for J9 actuator option. Rocker Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G–93 www.ck-components.com G