E205MD9AV2BE

E Series Sealed Miniature Toggle Switches Typical Applications • Telecommunications • Instrumentation • Medical equipment Features/Benefits • Sealed against solder and cleaning process contaminants • UL 94V-0 Nylon case and bushing • Multi-positions • ESD protection available • RoHS compliant models available Specifications Materials CONTACT RATING: B contact material: 0.4 VA max. @ 20 V AC or DC max. Q contact material: E1XX & E2XX MODELS: 7.5 AMPS @ 125 V AC or 28 V DC; 3 AMPS @ 250 V AC. E3XX MODELS: 5 AMPS @ 125 V AC or 28 V DC; 2 AMPS @ 250 V AC. See page F-29 for additional ratings. ELECTRICAL LIFE: E1XX and E2XX models: 40,000 make-and-break cycles at full load. E3XX models: 30,000 cycles. CONTACT RESISTANCE: Below 10 mΩ typ. initial @ 2-4 V DC, 100 mA, for both silver and gold plated contacts. INSULATION RESISTANCE: 109 Ω min. ELECTROSTATIC DISCHARGE (ESD) OPTION: F1 conductive bushing only. Dissipates up to 20,000 V DC from actuator to ground. DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level. OPERATING TEMPERATURE: –30ºC to 85ºC. SOLDERABILITY: Per MIL-STD-202F method 208D, or EIA RS-186E method 9 (1 hour steam aging). DEGREE OF PROTECTION: IP57; Protection against harmful dust deposit, full-scale voltage protection, temporary immersion. CASE & BUSHING: Glass filled nylon 6/6, flame retardant, heat stabilized (UL 94V-0). F1 conductive bushing option is impregnated with carbon fibers. ACTUATOR: Brass, chrome plated with internal o-ring seal standard. SWITCH SUPPORT: Brass or steel, matte-tin plated. SWITCH SUPPORT RETAINER: Stainless steel. CONTACTS & TERMINALS: B contact material: Copper alloy, with gold plate over nickel plate. Q contact material: Copper alloy, silver plated. See page F-29 for additional contact materials. TERMINAL SEAL: Epoxy. HARDWARE: Nut & Locking ring: Brass, nickel plated. Lockwasher: Steel, nickel plated. NOTE: Any models supplied with P, S, R, Q, B or G contact material are RoHS compliant and compatible. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages F–23 thru F–29. For additional options not shown in catalog, consult our Customer Service Center. All models are process sealed to withstand machine soldering temperatures and pressure wash cleaning methods. Switch Function E101 SP, On-None-On E103 SP, On-Off-On E105 SP, Mom.-Off-Mom. E107 SP, On-Off-Mom. E108 SP, On-None-Mom. E201 DP, On-None-On E203 DP, On-Off-On E205 DP, Mom.-Off-Mom. E207 DP, On-Off-Mom. E208 DP, On-None-Mom. E211 DP, On-On-On E213 DP, On-On-Mom. E215 DP, Mom.-On-Mom. **E301 3P, On-None-On Toggle F * F1 available with SP and DP versions only, please see page F-19 Actuator M .300” high S .500” high L3 Plastic, .940” high Bushing D1 .250” high *F1 Conductive, .250” high D9 .280” high **Y Threaded, .350” high Terminations A Right angle, PC thru-hole AV2 Vertical right angle, PC thru-hole C PC Thru-hole V3 .460” high, V-bracket Z Solder lug A3 Right angle, PC thru-hole AV3 Vertical right angle, PC thru-hole V6 .460” high, V-bracket V9 1.150” high, V-bracket V31 .460” high, snap-in V-bracket V61 .460” high, snap-in V-bracket W .750” long, wire wrap Z3 Quick connect Contact Material B Gold P Gold, matte-tin Q Silver S Silver, matte-tin G Gold over silver R Gold over silver, matte-tin Seal E Epoxy ** Y threaded bushing available for 1 & 2 pole only Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 15 Jan 21 F–22 www.ckswitches.com E Series Sealed Miniature Toggle Switches SWITCH FUNCTION SWITCH FUNCTION POS. 1 POS. 2 POS. 3 NO. POLES C&K marking on opposite side MODEL NO. E101 SP POS. 1 ON NONE ON E103 ON OFF ON E105 MOM. OFF MOM. E107 ON OFF MOM. E108 ON NONE MOM. CONNECTED TERMINALS POS. 2 POS. 3 C&K marking on opposite side SCHEMATIC 2-3 N/A 2-1 2-3 OPEN 2-1 2-3 N/A 2-1 SPDT SPDT Terminal Numbers For Reference Only Part number shown: E101SD1CBE DP E201 ON NONE ON E203 ON OFF ON E205 MOM. OFF MOM. E207 ON OFF MOM. E208 ON NONE MOM. E211 ** ON ON ON E213** ON ON MOM. E215** MOM. ON MOM. 2-3,5-6 N/A 2-1,5-4 2-3,5-6 OPEN 2-1,5-4 2-3,5-6 N/A 2-1,5-4 2-3,5-6 2-3,5-4 2-1,5-4 DPDT DPDT Terminal Numbers For Reference Only Part number shown: E201SD1CBE MOM. = Momentary All models ** Wiring for**3-way switch, see Section N. Wiring for 3-way switch with all options when ordered with G,R, Q or S contact material except with F1 conductive bushing. F Toggle Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 15 Jan 21 F–23 www.ckswitches.com E Series Sealed Miniature Toggle Switches SWITCH FUNCTION SWITCH FUNCTION POS. 1 POS. 2 POS. 3 NO. POLES 3P MODEL NO. CONNECTED TERMINALS POS. 2 POS. 1 C&K marking on opposite side E301 ON NONE POS. 3 C&K marking on opposite side ON 2-3,5-6,8-9 N/A SCHEMATIC 2-1,5-4,8-7 3PDT 3PDT Terminal Nos. For Reference Only Part number shown: E301SD1CBE ** Wiring for 3-way switch MOM. = Momentary All models ** Wiring for 3-way switch, see Section N. with all options when ordered with G, R, Q or S contact material except with F1 conductive bushing. ACTUATOR COLOR ACTUATOR M  .300” HIGH ACTUATOR S  .500” HIGH L3  PLASTIC, .940” HIGH * * Gloss plastic OPTION CODE * 2 L3 ACTUATOR COLOR BLACK Chrome finish Standard when ordered with A, A3, AV2, AV3, V2-V61 terminations. Finish: Chrome. Other colors available, consult Customer Service Center. No color choice required for S & M actuators. Standard when ordered with C, Z, Z3, W & W4 terminations. Finish: Chrome * Actuators shown with standard D1 bushing. Subtract .030 (0,76) for D9 bushing. Subtract .100 (2,54) for Y bushing. BUSHING D1  .250” HIGH, UNTHREADED D9  .280” HIGH, UNTHREADED F1  ESD CONDUCTIVE BUSHING, Y  THREADED, INSULATED, .350” HIGH WITH KEYWAY .250” HIGH, UNTHREADED F1 bushing is not UL approved 1/4-40 UNS-2A PANEL MOUNTING Toggle F ESD protection depends on proper grounding of switch support bracket. F1 conductive bushing option is impregnated with carbon fibers; dissipates electrostatic discharge (ESD) up to 20,000 V from actuator to ground. Available with M & S actuator options and A, A3, AV2, AV3, V3-V61 termination options. E3XX models not available with D9 bushing. NOTE: Internal o-ring actuator seal standard for all bushing options. Available only with C, Z, Z3, & W terminations. Available for 1&2 pole only. Hardware: One dress nut part number 299D01201, one hex nut part number 540400201 and lockwasher part number 700303202 supplied standard. Will withstand 4 in.-lbs. of torque with no distortion. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 15 Jan 21 F–24 www.ckswitches.com E Series Sealed Miniature Toggle Switches TERMINATIONS Z  SOLDER LUG C  PC THRU-HOLE Not available with F1 conductive bushing or P, R or S contact material. SPDT thru 3PDT SPDT thru 3PDT PC MOUNTING Not available with F1 conductive bushing. Z3  QUICK CONNECT SPDT thru 3PDT Not available with F1 conductive bushing or P, R or S contact material. Mating quick connector available; order part number 530100000, page F-16. A  RIGHT ANGLE, PC THRU-HOLE Actuator Shown In Pos. 1 A3  RIGHT ANGLE, SNAP-IN, PC THRU-HOLE SECTION A-A E101MD1ABE Terminal Nos. For Reference Only Horizontal Actuation PC MOUNTING SPDT Not available with Y bushing. Terminal bend radii and lead-in manufacturing option. A  RIGHT ANGLE, PC THRU-HOLE Actuator Shown In Pos. 1 SECTION A-A A3  RIGHT ANGLE, SNAP-IN, PC THRU-HOLE Terminal Nos. For Reference Only PC MOUNTING E201MD1ABE Horizontal Actuation DPDT F Toggle Not available with Y bushing. Terminal bend radii and lead-in manufacturing option. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 15 Jan 21 F–25 www.ckswitches.com E Series Sealed Miniature Toggle Switches TERMINATIONS A  RIGHT ANGLE, PC THRU-HOLE PC MOUNTING E301MD1ABE Horizontal Actuation Actuator Shown In Pos. 1 SECTION A-A 3PDT Terminal Nos. For Reference Only Not available with D9 & Y bushings. Terminal bend radii and lead-in manufacturing option. AV2  VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150” PITCH E101MD1AV2BE Vertical Actuation SPDT Actuator Shown In Pos. 1 SECTION A-A PC MOUNTING AV3  VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE, .150” PITCH Not available with Y bushing. Terminal bend radii and lead-in manufacturing option. AV2  VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150” PITCH E201MD1AV2BE Vertical Actuation SECTION A-A Actuator Shown In Pos. 1 PC MOUNTING DPDT A3  VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE, .150” PITCH Toggle F Not available with Y bushing. Terminal bend radii and lead-in manufacturing option. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 15 Jan 21 F–26 www.ckswitches.com E Series Sealed Miniature Toggle Switches TERMINATIONS AV2  VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150” PITCH E301MD1AV2BE Vertical Actuation 3PDT SECTION A-A Actuator Shown In Pos. 1 PC MOUNTING AV3  VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE .150” PITCH Not available with D9 & Y bushings. Terminal bend radii and lead-in manufacturing option. V6  VERTICAL MOUNT, V-BRACKET V61  VERTICAL MOUNT, V-BRACKET, SNAP-IN PC MOUNTING E101MD1__BE SPDT SNAP-IN OPTION CODE DIM ‘A’ V6, V61 .460 (11,68) Actuator Shown In Pos. 1 Not available with Y bushing. V6  VERTICAL MOUNT, V-BRACKET PC MOUNTING V61  VERTICAL MOUNT, V-BRACKET, SNAP-IN E201MD1__BE DPDT SNAP-IN DIM ‘A’ V6, V61 .460 (11,68) Actuator Shown In Pos. 1 Not available with Y bushing. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 15 Jan 21 F–27 www.ckswitches.com F Toggle OPTION CODE E Series Sealed Miniature Toggle Switches TERMINATIONS V3, V9  VERTICAL MOUNT, V-BRACKET V31  VERTICAL MOUNT, V-BRACKET, SNAP-IN PC MOUNTING OPTION CODE SNAP-IN E101MD1__BE SPDT DIM ‘A’ V3, V31 .460 (11,68) V9 1.150 (29,21) Actuator Shown In Pos. 1 Not available with Y bushing. V3, V9  VERTICAL MOUNT, V-BRACKET PC MOUNTING V31  VERTICAL MOUNT, V-BRACKET, SNAP-IN OPTION CODE SNAP-IN E201MD1__BE DPDT DIM ‘A’ V3, V31 .460 (11,68) V9 1.150 (29,21) Actuator Shown In Pos. 1 Not available with Y bushing. V9  VERTICAL MOUNT, V-BRACKET PC MOUNTING E301MD1__BE Toggle F SNAP-IN 3PDT OPTION CODE DIM ‘A’ V9 1.150 (29,21) Actuator Shown In Pos. 1 Not available with D9 & Y bushings. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 15 Jan 21 F–28 www.ckswitches.com E Series Sealed Miniature Toggle Switches CONTACT MATERIAL OPTION CODE B CONTACT MATERIAL GOLD 1 P Q S G R TERMINAL PLATING RATINGS GOLD 1 LOW LEVEL/ MATTE-TIN 6 DRY CIRCUIT 0.4 VA MAX. @ 20 V AC OR DC MAX. SILVER 5 SILVER 4,5 E1XX & E2XX MODELS: 7.5 AMPS @ 125 V AC OR 28 V DC; 3 AMPS @ 250 V AC. E3XX MODELS: 5 AMPS @ 125 V AC OR 28 V DC; 2 AMPS @ 250 V AC. POWER MATTE-TIN 6 GOLD OVER GOLD 3 LOW LEVEL/DRY SILVER 2,3 MATTE-TIN 6 CIRCUIT OR POWER E1XX AND E2XX MODELS: 0.4 VA MAX @20 V AC OR DC MAX. OR 7.5 AMPS @125 V AC OR 28 V DC; 3 AMPS @ 250 V AC. DC E3XX MODELS: 0.4 VA MAX. @ 20 V AC OR DC MAX. OR 5 AMPS @ 125 V AC OR 28 V DC; 2 AMPS @ 250 V AC. * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. 1 CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate. NOTE: Any models supplied with P, S, R, Q, B or G contact material are RoHS compliant. 2 END CONTACTS: Coin silver, with gold plate over nickel plate. All models with all options when ordered with S, R, G, or Q contact material except with F1 conductive bushing. 3 CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate B contact material standard with all terminations. over nickel plate. P, S & R contact materials not available with Z & Z3 terminations. 4 END CONTACTS: Coin silver, silver plated. 5 CENTER CONTACT & ALL TERMINALS: Copper alloy, with gold flash over silver plate. Or copper alloy, silver plated. 6 TERMINALS: Copper alloy, with matte-tin over nickel plate. F Toggle Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 15 Jan 21 F–29 www.ckswitches.com