K12C15N

K12 High Performance Key Switches Features/Benefits • Excellent tactile feel • Wide choice of LED colors, travel and actuator forces • • • • • High reliability / long life Sealed version available Designed for low-level switching Typical Applications • Automotive • Off-road transportation • Industrial electronics • Computers & network equipment • Joysticks Double stroke version available Detector version available Construction: Electrical FUNCTION: momentary DISTANCE BETWEEN BUTTON CENTERS: min. 11 (0.433) K12C = 13 (0.512) TERMINALS: PC pins, tinned MOUNTING: Locating pins; K12G and K12P additionally with snap-in housing SWITCHING POWER MIN./MAX.: 0.02mW/3 W SWITCHING VOLTAGE MIN./MAX.: 2 V DC / 30 V DC SWITCHING CURRENT MIN./MAX.: 10 mA /100 mA DIELECTRIC STRENGTH (50 Hz, 1 min): ≥ 500 V OPERATING LIFE with max. switching power: ≥ 106 operations K12G & K12GO; operating life of second switch 5 x 104 operations, operating life K12C and version with more than 6N (7N, 9N 20N) please consult factory. CONTACT RESISTANCE: Initial ≤ 50 mΩ INSULATION RESISTANCE: ≥ 1010 Ω BOUNCE TIME:  ≤ 1 ms Operating speed 100 mm/s (3.94/s) Mechanical TOTAL TRAVEL: 1 mm, 1,5 mm, 2 mm SWITCHING TRAVEL: 0,6 mm* OPERATING FORCE: 1.5 N OD without snap-point as detector switch, 2.5 N, 3.5 N, 5 N, 3.5/7 N, 6/12 N. Additional operating force 7N, 9N and 20N, available on request. PROTECTION CLASS:  K12C IP 67 (dust tight, protected against the effects of immersion in water; other versions IP 40) Environmental OPERATING TEMPERATURE: -40˚C to 85˚C. STORAGE TEMPERATURE: -40˚C to 95˚C. * Additional switching travel (with pre-travel) available by request. Packaging Process Bulk in boxes of 250 pieces (version C or GO) or 300 pieces (version A, AL, P or PL) SOLDERABILITY: Wave soldering, compatible with lead free soldering profile Hand soldering, 350˚C How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. Note: Some of the configurations may not be available or could require some development. Series K12A K12AL K12P K12PL K12C K12GO 1 2 No snap-in pegs No snap-in pegs with central LED With snap-in pegs With central LED Sealed contact with rubber cap (IP 67) Two-step switch Cap Color NONE version with LED, version C BK Black cap – No LED YE Yellow cap - No LED RD Red cap – No LED GY Gray cap – No LED Standard LED Code NONE No LED LV306 Green LV327 Yellow LV315 Orange LV352 Red LV302 White LV328 Blue LED Color NONE No LED GN Green YE Yellow OG Orange RD Red WH White BU Blue Travel* 1 1 mm (0.039) 1.5 1.5 mm (0.059) 2 2 mm (0.079) * K12C – ­ 1mm MAX K12 with LED – 1.5 mm MAX ** K12G & K12GO version only *** Additional operating force: 7N, 9N available on request Operating Force*** 1.5N OD 1.5 N without snap-point 2.5N 2.5 N 3.5N 3.5 N 5N 5N 3.5/7N 3.5/7 N** 6/12N 6/12 N** Contact Arrangement NONE SPST NO (STD) 1R SPST NC (Special request) Dimensions are shown: mm Specifications and dimensions subject to change D–9 www.ckswitches.com Key Switches K D K12 High Performance Key Switches SERIES K12A without snap in total travel 1 or 1.5mm PCB LAYOUT, MOUNTING SIDE 2,5 [.098] 2,5 0,2 2,6 [.007] [.1141] 11 2.9 .4334] [.354] 9 ø1 [.0394] [.098] 7,5 [.295] [.103] 12 ø 9,8 7 [.4 [.386] 2] 10,9 K1 2 [.429] K12AL [.217] 2,5 ø 5,6 2,5 2,5 [.098] [.181] [.098] 0,2 ø 4,6 [.007] 3,6 K (LED) [.098] 2,6 [.103] 1,5 PCB [.22] 1,1+0,05 2x 2x center hole 2x LED 2x 2x switch Without with LED ø0,5 (.020) Sn 0,7x0,2 (.028x.081) Sn Terminal Section Surface 2 0,9 ±0,05 K1 Key Switches D 7,5 [.295] [.0591] 11 PCB LAYOUT, MOUNTING SIDE [.433] 5,5 ø3 [.118] Hole ø Discription K Dimensions are shown: mm Specifications and dimensions subject to change D–10 www.ckswitches.com K12 High Performance Key Switches SERIES with snap in 2,9 (.1141) 9,6 (.378) 3,75 (.148) 1,5 (.059) 2,5 (.098) 1,2 (.047) 12,5 (.492) 2,5 (.098) 7,5 (.295) 2,6 (.103) 11,0 (.433) 1,5 (.059) ø1,0 (.0394) 3,5 (.138) PCB LAYOUT, MOUNTING SIDE 9,0 (.354) total travel 1, 1,5 or 2 (.0394, .0591 or .0787) 0,2 (.007) K12P center of actuation area (notice LED) 9,8 (.386) 1 (.4 2,0 72 ) 10,9 SQ. (.429) Hole Ø Without LED 1,7 (.069) 2x 1,6 (.062) 1x Description Terminal Section Surface snap-in coding hole (L,M,N) 1,1 (.043) 2x center hole 0,9 (.035) 2x switch 0.7 x 0.2 (.028 x .081) Sn Sn K12 K12PL PCB LAYOUT, MOUNTING SIDE 7,5 (.295) 0,2 (.007) 2,6 (.103) K LED 2,5 (.098) total travel 1 or 1,5 (.0394 or .0591) 11,0 (.433) 5,5 (.217) ø3,0 (.118) D 2,5 (.098) 3,75 (.148) PCB 1,5 (.0591) pin ø 1.1 (.0433) for coding of LED color 2,5 (.098) 9,6 (.378) K12 K12 K 2,6 (.098) coding pin L center of actuation area (notice LED) ø4,6 (.181) 5,6 (.22) Key Switches 3,6 (.141) Hole Ø Without LED 1,7 (.069) 2x 1,6 (.062) 1x 1,1 (.043) 2x 0,9 (.035) 2x 2x Description Terminal Section Surface snap-in coding hole (L,M,N) center hole LED m0.5 (.020) switch 0.7 x 0.2 (.028 x .081) Sn Sn Dimensions are shown: mm Specifications and dimensions subject to change D–11 www.ckswitches.com K12 High Performance Key Switches SERIES K12C SEALED CONTACT WITH RUBBER CAP (IP 67) total travel 1,0 (.0394) PCB LAYOUT, MOUNTING SIDE 2,9 (.114) ø12,8 (.504) 2,5 (.098) 2,5 (.098) 5,0 (.197) 2,3 (.090) 0,2 (.0078) 2,9 (.114) 1,2 (.047) 1,8 (.0709) 5,5 (.217) 12,0 (.472) 7,5 (.295) 12,0 (.472) 2 K1 10,9 (.429) actuation area 10,9 (.429) Hole SCHEMATIC A Ø Without LED Description 1,1 (.043) 2x center hole 0,9 (.035) 2x switch Terminal Section Surface 0.7 x 0.2(.0275 x .0787) Sn Key Switches D R Dimensions are shown: mm Specifications and dimensions subject to change D–12 www.ckswitches.com K12 High Performance Key Switches SERIES K12GO PCB LAYOUT, MOUNTING SIDE (0.0591) 5 (0.197) (0. 3,75 1/2 (0.148) 7,5 (0.295) 11 (0.433) (0.354) 9 2,9 3,5 (0.138) 12 1/1 2/1 (0.114) 1,5 (0.059) 2/2 2,6 (0.103) 0,2 (0.0078) total travel 1,5mm 9,6 (0.278) 47 2) ø 9,8 (0.386) (0.244) SQ. 10,9 (0.428) K12 2/2 1/1 1/2 D 2/1 1/1 1/2 2/1 2/2 Hole Ø Without LED Description 1,7 2x snap-in (.069) 1,6 1x code (.062) 0,9 LED (.035) 2x switch 2 2x switch 1 Terminal Section m0.5 (.020) 0.7 x 0.3 (.028 x .012) 0.7 x 0.2 (.028 x .081) Surface Sn Sn Sn Dimensions are shown: mm Specifications and dimensions subject to change D–13 www.ckswitches.com Key Switches SCHEMATIC K12G K12 High Performance Key Switches CAP COLOR OPTION CODE COLOR NONE BK YE RD GY Version with LED Black - no LED Yellow - no LED Red - no LED Gray - no LED LED COLOR OPTION CODE STANDARD LED CODE COLOR NONE Models without LED GN Green YE Yellow OG Orange RD Red WH White BU Blue COLOR NONE Models without LED LV306 Green LV327 Yellow LV315 Orange LV352 Red LV302 White LV328 Blue TRAVEL 1 1 mm 1.5 1.5 mm 2 2 mm OPERATING FORCE Key Switches D OPTION CODE OPERATING FORCE 1.5N OD 1.5 N,150g without snap-point 2.5N 2.5 N, 250g 3.5N 5N 3.5/7N 3.5/7 N, 350/700g 6/12N 6/12 N, 600-1200g 3.5 N, 350g 5 N, 500g CONTACT ARRANGEMENT OPTION 1R SPST NC (SPECIAL REQUEST FOR NORMALLY CLOSED OPTION) Dimensions are shown: mm Specifications and dimensions subject to change D–14 www.ckswitches.com