KDS

KDS Series Intrusion Switches Features/Benefits • Slot mount into chassis to reduce installation cost • Wire harness length & connector easily customized • Available in N.O. or N.C. configuration • RoHS compliant Typical Applications • Intrusion/Alarm switch in network desktop PC • Intrusion/Alarm switch in telecommunication equipment • Intrusion/Alarm switch in cellular base station Specifications CONTACT RATING: 0.4 VA max. @ 20 V AC or DC. MECHANICAL & ELECTRICAL LIFE: 10,000 actuations min. at full load. CONTACT RESISTANCE: 200 m Ω max. initial @ 2-4 V DC, 100mA. INSULATION RESISTANCE: 109 Ω min. OPERATING TEMPERATURE: –40ºC to +85ºC TRAVEL: Pretravel: 0.050 max. Overtravel: 0.375 ±.025" DIELECTRIC STRENGTH: 500 Vrms min. @ sea level. PACKAGING: Bulk packaging. Materials HOUSING: Nylon 6/6 (UL 94V-0) ACTUATOR: Nylon 6/6 (UL 94V-0) MOVABLE CONTACT: Copper alloy, gold plate over nickel plate. FIXED CONTACT: Brass, gold plate over nickel plate. WIRE: UL 1061-24 AWG. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. How To Order Complete part numbers for KDS Series Switches are shown below. SWITCH FUNCTION POS. 1 PART NUMBER POS. 2 SCHEMATIC (10,16) KDS11 KDS33 OFF MOM. SPST N.O. (15,24) KDS33 ON OFF SPST N.C. (8,89) (9,65) (7,62) D IA. (4,60ø) (12,39) E Detect .710 (18,03) (11,43) MAX. PLUNGER TRAVEL PANEL CUT-OUT (THICKNESS .040) ø DIA. (3,68ø) (304,8±12,7) (6,35) STRIPPED Third Angle Projection Dimensions are shown: mm Specifications and dimensions subject to change E–33 www.ck-components.com