KSS2GLFS

KSS Series Subminiature SMT Side Actuated Features/Benefits • Low profile of 1.6 mm • Excellent tactile feel • High shear force • Range of actuation forces • Large flat top • Redundant contacts option • IP 40 sealed • RoHS compliant and compatible Typical Applications • Cellular phone • PA, pagers • Industrial electronics • Health diagnostic electronics B Tactile Switches Specification FUNCTION: momentary action CONTACT ARRANGEMENT: N.O. TERMINALS: Gullwing / 3-Way type for SMT IP40 sealed Electrical Silver Gold 0.2 VA 32 VDC 10 mA 1 mA Mechanical OVERLOAD: 20N TACTILE FEELING: 2 and 4N: 25% min. 2.5N: 30% min. Type KSS221G KSS231G KSS233W KSS241G Operating force Newtons (grams) 2.0 (200) ± 0.5 2.5 (250) ± 0.5 2.5 (250) ± 0.6 4.0 (400) ± 1.0 Operating life (operations) 100,000 100,000 100,000 100,000 Travel 0,3 0,3 0,3 0,3 ± ± ± ± MAXIMUM POWER: 1 VA 32 VDC MAXIMUM VOLTAGE: MAXIMUM CURRENT: 50 mA MINIMUM CURRENT: 1 mA DIELECTRIC STRENGTH: ≥ 250 VDC CONTACT RESISTANCE: < 100 mΩ INSULATION RESISTANCE (100 VDC): ≥ 109 Ω BOUNCE TIME: < 3 ms Environmental OPERATING TEMPERATURE: STORAGE TEMPERATURE: 0,15 0,10 0,15 0,15 Silver -40˚C to 85˚C -55˚C to 85˚C Gold -40˚C to 125˚C -55˚C to 125˚C Process Infared reflow soldering in accordance with IEC 61760-1 Packaging NOTE: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Tape and reels in reels of 3,000 pieces. External diameter 330mm ± 2mm. How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. However, please note that all the combinations of these options are not feasible. For any part number different from those listed above, please consult your local representative. K S S Actuator 2 Standard, 1,1 (0.043) 3 Large, 1,8 (0.070) Operating Force 2 2.0 N (200 grams) 3 2.5 N (250 grams) 4 4.0 N (400 grams) LFS RoHS compliant and compatible. Silver plated. LFG RoHS compliant and compatible. Gold plated. Termination G Gull wing, SPST W 3 way, 4 redundant contacts Contact Material 1 Silver 3 Gold Dimensions are shown: Inch (mm) Specifications and dimensions subject to change B–21 www.ck-components.com KSS Series Subminiature SMT Side Actuated 4,4 +0,15 -0,10 KSS 3,5 0 +0,15 4.18 3,1 B Tactile Switches == == 7 5,5 2,5 0,1 1,1 1.7 ± 0.05 ACTUATOR 2 STANDARD, 1,1 (0.043) 4,4 (.173) 3 1,1 (.043) LARGE, 1,8 (0.070) 4,4 (.173) TERMINATION G GULLWING 7,6 W 3 WAY, 4 REDUNDANT CONTACTS 1,8 (.071) 3 Common 3,7 3,7 2 1 0,8 1,7 (2x) 0.8 1,7 (4x) TAPE & REEL 1,75 ± 0,1 B 2 ± 0,1 ø 1,5 8 ± 0,1 +0,1 0 4 ± 0,1 12 ± 0,3 5,5 ± 0,1 A A B 5 ± 0,1 3,9 ± 0,1 ø 1,5 +0,1 0 DIRECTION OF FEED Dimensions are shown: Inch (mm) Specifications and dimensions subject to change B–22 www.ck-components.com 7,4 ± 0,2 4 ± 0,2 2 (2x) 1,45 (2x)