LP Series Miniature Snap-in Slide Switches
Features/Benefits • 6 to 11 AMPS available • Easy assembly—Snap-in mounting • Contamination resistant—extended actuator • Positive detent • RoHS compliant Typical Applications • Small appliances • Outdoor appliances • Portable tools
Models Available
Specifications
CONTACT RATING: Q contact material (LP0X, LP2X Models: 6 AMPS @ 125 V AC or 28 V DC; 3 AMPS @ 250 V AC (UL/CSA). (LP7X, LP8X Models): 11 AMPS @ 125/250 V AC (UL/CSA). See page I-27 for additional ratings. ELECTRICAL LIFE: 10,000 make-and-break cycles at full load. INSULATION RESISTANCE: 109 Ω min. DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level. CONTACT RESISTANCE: Below 10 m Ω typ. initial @ 2-4 V DC, 100 mA, for both silver and gold plated contacts. OPERATING TEMPERATURE: -30ºC to +65ºC STORAGE TEMPERATURE: -30ºC to +85ºC
NOTE: Any models supplied with Q, B or G contact material are RoHS compliant. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center.
Materials
HOUSING: 6/6 nylon (UL94V-2), black. ACTUATOR: Glass filled acetal, UV and petroleum resistant, black. CONTACTS: Q contact material: Copper, silver plated. See page I-27 for additional contact materials. TERMINALS: Q contact material: Copper, silver plated. See page I-27 for additional contact materials. CONTACT SPRING: Music wire or stainless steel. TERMINAL SEAL: Epoxy.
I Slide
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages I–26 and I–27. For additional options not shown in catalog, consult Customer Service Center.
Switch Function LP22 DPDT, 6 AMP LP02 SPDT, 6 AMP LP81 DPST, 11 AMP LP82 DPDT, 11 AMP
Actuator C2 Black cap C1 Whitecap C3 Red cap Detent 1 With detent Mounting Style T2 Snap-in panel with tabs (D, L, N markings only)
Terminations 03 Solder lug with hole Housing Markings NONE No markings D ON-OFF Contact Material Q Silver B Gold
Dimensions are shown: Inches (mm) Specifications and dimensions subject to change
I–25
www.ck-components.com
LP Series Miniature Snap-in Slide Switches
SWITCH FUNCTION
NO. POLES SP
MODEL NO.
AMP RATING* 6
SWITCH FUNCTION SPDT
SCHEMATIC
NO. POLES
MODEL NO.
AMP RATING*
SWITCH FUNCTION
SCHEMATIC
LP02
LP22
6
DPDT
LP81
DP All models with all options when ordered with ‘Q’ contact material.
11
DPST
I Slide
Contacts make on side actuator thrown. * For complete contact ratings, see CONTACT MATERIALS Section, page I-27.
LP82
11
DPDT
Terminal Nos. For Reference Only
Part number shown: LP22C21S203Q
ACTUATOR
C1; C2; C3
OPTION CODE2 ACTUATOR CAP COLOR BLACK WHITE RED NOTE: Actuator finish: gloss. Other colors available, consult Customer Service Center.
C2 C1 C3
DETENT
1
WITH DETENT
MOUNTING STYLE
T2
SNAP-IN PANEL WITH TABS
PANEL MOUNTING DIM. ‘A’
PANEL THICKNESS .030–.045 (0,76) (1,14) .046–.059 (1,17) (1,50) .060–.089 (1,52) (2,26) Mounting style T2 suitable for markings. See HOUSING MARKINGS options. .090–.120 (2,29) (3,05)
DIM ‘A’ .578 (14,68) .585 (14,86) .598 (15,19) .610 (15,49)
Dimensions are shown: Inch (mm) Specifications and dimensions subject to change
I–26
www.ck-components.com
LP Series Miniature Snap-in Slide Switches
TERMINATIONS
03
SOLDER LUG WITH HOLE
HOUSING MARKINGS
NONE
NO MARKINGS
D
I
ON-OFF
Slide
NOTE: Housing markings are available with ‘T2’ mounting style only. The marking color on all housings with marking options ‘D’ is white, standard. Other marking colors are available, consult Customer Service Center.
Orientation of actuator and terminals.
CONTACT MATERIAL
OPTION CODE CONTACT MATERIAL RATINGS
Q
SILVER 2
POWER
LP0X, LP2X MODELS: 6 AMPS @ 125 V AC or 28 V DC; 3 AMPS @ 250 V AC (UL/CSA). LP7X, LP8X MODELS: 11 AMPS @ 125/250 V AC (UL/CSA).
B
GOLD 1
LOW LEVEL/DRY CIRCUIT 0.4 VA MAX. @20 V AC OR DC MAX.
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
1 2 3
CONTACTS & TERMINALS: Copper, with gold plate over nickel plate. CONTACTS & TERMINALS: Copper, silver plated (standard with all termination options). CONTACTS & TERMINALS: Copper, with gold plate over nickel plate over silver plate.
NOTE: Any models supplied with Q or B contact material are RoHS compliant. All models with all when ordered with ‘Q’ contact material.
Dimensions are shown: Inches (mm) Specifications and dimensions subject to change
I–27
www.ck-components.com
很抱歉,暂时无法提供与“LP02C21T203DQ”相匹配的价格&库存,您可以联系我们找货
免费人工找货