PTS525SM08SMTR2LFS

PTS 525 Series Microminiature Tact Switch for SMT Features/Benefits • 0.8 & 1.5 mm actuator height • Ruggedized package in a Typical Applications • Consumer products • Instrumentation • Remote controls compact size • High number of cycles Process FUNCTION: Momentary action CONTACT ARRANGEMENT: 1 make contact = SPST, N.O. SOLDERING: This component is suited to the following methods: Infrared Reflow Soldering in accordance with IEC61760-1 Electrical Packaging MAXIMUM VOLTAGE: 15 VDC MAXIMUM CURRENT DC: 20 mA DIELECTRIC STRENGTH: 250 VA C (1mn) CONTACT RESISTANCE: ≤ 100 mΩ INSULATION RESISTANCE: ≥ 100 MΩ BOUNCE TIME: ≤ 10 ms Switches in reels of: 5,000 pieces in 0.8 mm height 4,000 pieces in 1.5 mm height Dimensions of reels according to EIA 481B External diameter 330 mm Environmental NOTE: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. OPERATING TEMPERATURE: -20˚C to 70˚C How To Order Please see chart below for full part numbers. Part Number Height (mm) Leads Shape Ground Pin Force Travel (mm) Operating Life PTS525 SM08 SMTR 2 LFS 0.8 G No 160 gf ± 50 gf 0.25 ± 0.2 1,000,000 PTS525 SK08 SMTR 2 LFS 0.8 G No 260 gf ± 50 gf 0.25 ± 0.2 200,000 PTS525 SM15 SMTR 2 LFS 1.5 G No 160 gf ± 50 gf 0.25 ± 0.2 1,000,000 PTS525 SK15 SMTR 2 LFS 1.5 G No 260 gf ± 50 gf 0.25 ± 0.2 500,000 PTS525 SMG15 SMTR 2 LFS 1.5 G Yes 160 gf ± 50 gf 0.25 ± 0.2 1,000,000 PTS525 SKG15 SMTR 2 LFS 1.5 G Yes 260 gf ± 50 gf 0.25 ± 0.2 500,000 PTS525 SMG15J SMTR 2 LFS 1.5 J Yes 160 gf ± 50 gf 0.25 ± 0.2 1,000,000 PTS525 SKG15J SMTR 2 LFS 1.5 J Yes 260 gf ± 50 gf 0.25 ± 0.2 500,000 Dimensions are shown: mm Specifications and dimensions subject to change B–23 www.ckswitches.com Tactile Switches Specification PTS 525 Series Microminiature Tact Switch for SMT 0,08 Max PTS525 SM08 SMTR2 LFS PTS525 SK08 SMTR2 LFS 2 1 5,8 6,4 4 3 SCHEMATIC 8 4,8 4 0,85 PTS525 SM15 SMTR2 LFS PTS525 SK15 SMTR2 LFS 1 2 3 4 4,8 2,8 0,5 3 5 2,6 2 5,2 1 3,7 ± 0,1 0,1 5,2 2,8 DIA. 3 RECOMMENDED PCB LAYOUT Ø 2 2 1,5+0,1 0 1 6,4 4 3 SCHEMATIC 0,5 8 4,8 3 1 2 3 4 2,8 4 4,8 2,6 5,1 2 3,7± 0,05 1 2,6 5,1 RECOMMENDED PCB LAYOUT PTS525 SMG15 SMTR2 LFS PTS525 SKG15 SMTR2 LFS 5,8 Ø2 6 2 1,2 1,5 1 0,8 3 3 0,1 6 1 4 SEE DETAIL B 2 5,6 4,7 4,8 2,8 4,9 3,7 ` 0,1 2 0,5 1 4 SCHEMATIC 8 5,8 4,6 3 6 6,4 5,1 2,6 5 4 3 5 0,05 DETAIL B SCALE 20 Prohibited area for run 1,6 0,8 (5,4) 5,1 2,6 Tactile Switches B 5 1,4 RECOMMENDED PCB LAYOUT Dimensions are shown: mm Specifications and dimensions subject to change B–24 www.ckswitches.com PTS 525 Series Microminiature Tact Switch for SMT PTS525 SMG15J SMTR2 LFS PTS525 SKG15J SMTR2 LFS 1 1,5` 0,2 0,8 1,1 Ø2 6 3 2 4 5 SCHEMATIC Tactile Switches 5,4 5,2 3,4 4,9 6 1 1 2 3 4,6 5,6 3 4,4 2 3,7 4,9 5,2 0,5 6 4 3 4 5 0,7 5 RECOMMENDED PCB LAYOUT TAPE & REEL 0.8 mm height Cover tape (Polyester) 5,000 pieces per reel Reel (Polystyrene) Carrier tape (Polystyrene) Cover tape CARRIER TAPE 14 Max +2 10 0 8 12` 0,3 2 5,5 n 1,5 1,75 4 NOTE: n 330 n 13` 0,5 2` 0,5 n 21` 0,8 SEE DETAIL A REEL DETAIL A SCALE 0,5 Dimensions are shown: mm Specifications and dimensions subject to change B–25 www.ckswitches.com PTS 525 Series Microminiature Tact Switch for SMT TAPE & REEL 1.5 mm height 4,000 pieces per reel Cover tape (Polyester) Tactile Switches B Reel (Polystyrene) Carrier tape (Polystyrene) Cover tape CARRIER TAPE 14 Max 10+2 0 12` 0,3 2 5,5 n 1,5 1,75 4 8 n 330 n 13` 0,5 2` 0,5 n 21` 0,8 SEE DETAIL A REEL DETAIL A SCALE 0,5 Dimensions are shown: mm Specifications and dimensions subject to change B–26 www.ckswitches.com