PTS645SH95TR

REVISIONS ECN (5,99) SYM 1 1 DESCRIPTION DATE CREATE NEW DWG. APPROVAL 7/1/04 KON DIM. ’D’ SEE CHART 4X .025 MAX. (0,6) DIM. ’H’ SEE CHART .142 (3,6) 2X 0.036 (0,9) 2X 0.028 (0,7) ADHESIVE BACKED TAPE SEE NOTE 14 MODEL PTS645SH95TR OPERATING DIM. ’H’ FORCE 200g TYP. .374(9,5mm) ACTUATOR COLOR GRAY DIM. ’D’ 0.039 (1,00) MAX. 0.709 (18,00) 0.354 (9,00) 0.012 THK. x 0.020 (0,30) x (0,50) TYP. CARRIER TAPE SEE NOTE 14 1 REV. 0.709 (18,00) -ATHRU TYP. 0.197 (5.00) 0.250 (6,35) TYP 0.500 TYP (12,70) PITCH TO NEXT SWITCH CAD FILE NO.: ALL DIMS. AND TOLS. PER ANSI Y14.5 NOTE: FOR PRODUCT REQUIREMENTS & PACKING VISUAL AIDE, SEE SHEET 2 THIS DOCUMENT AND THE INFORMATION IN IT IS THE EXCLUSIVE PROPERTY OF C&K COMPONENTS, INC., AND IS NOT TO BE USED OR DISCLOSED WITHOUT THE EXPRESS WRITTEN PERMISSION OF C&K COMPONENTS, INC. UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES TOLERANCES DECIMAL R C&K P/N: PTS645SH95TR ANGULAR X COMPONENTS, INC. .012(0,3) SCALE CRITICAL - MUST COMPLY WITH C&K QUALIFICATION STD. CKQI0019 DRAWN MAJOR DIMENSION pts645sh95tr-pg1_1 4:1 K.ONEIL DATE 7/1/04 REV. 1 APPROVED SHT.NO. 1OF 2 REVISIONS ECN SYM 1 DESCRIPTION DATE APPROVAL SEE SHEET 1. MINIMUM OF 3 BLANK POSITIONS AT START OF TAPE 1 BLANK POSITION EACH FOLD MAXIMUM 2 BLANK CONSECUTIVE POSITIONS 11.457 (291,0) 13.031 (331,0) 1 REV. 1.850 (47,0) NOTES: 1. SPLICES TO BE CONNECTED WITH ADHESIVE TAPE. DETAIL X (NOT TO SCALE, FOR VISUAL PURPOSE ONLY) CAD FILE NO.: ALL DIMS. AND TOLS. PER ANSI Y14.5 NOTE: FOR PRODUCT OUTLINE, SEE SHEET 1 THIS DOCUMENT AND THE INFORMATION IN IT IS THE EXCLUSIVE PROPERTY OF C&K COMPONENTS, INC., AND IS NOT TO BE USED OR DISCLOSED WITHOUT THE EXPRESS WRITTEN PERMISSION OF C&K COMPONENTS, INC. UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES TOLERANCES DECIMAL R C&K P/N: PTS645SH95TR ANGULAR X COMPONENTS, INC. .012(0,3) SCALE CRITICAL - MUST COMPLY WITH C&K QUALIFICATION STD. CKQI0019 DRAWN MAJOR DIMENSION pts645sh95tr-pg2_1 NONE K.ONEIL DATE 7/1/04 REV. 1 APPROVED SHT.NO. 2OF 2