PTS841ESDGKSMTRLFS

PTS841 Series Microminiature SMT Side Actuated Features/Benefits • 3.6 x 3.5 mm footprint • 1.25 mm thickness • ESD pin option • Peg option • Commercial grade Typical Applications • IoT devices • Wearables • Portable devices • Remote controls B Electrical FUNCTION: momentary action CONTACT ARRANGEMENT: 1 make contact = SPST N.O. TERMINALS: G for SMT TRAVEL: 0.2mm ± 0.1 mm LIFE: 100,000 cycles MAXIMUM VOLTAGE: 12 VDC MAXIMUM CURRENT DC: 50 mA DIELECTRIC STRENGTH: 250 VA C (1mn) CONTACT RESISTANCE: ≤ 100 mΩ Initial INSULATION RESISTANCE: ≥ 100 MΩ BOUNCE TIME: ≤ 5 ms Operating Force (gf) Type Pegs ESD pin option Environmental PTS841 GM SMTR LFS 180 ± 50 No No OPERATING TEMPERATURE: -40˚C to 85˚C PTS841 GK SMTR LFS 250 ± 50 No No Process PTS841 GMP SMTR LFS 180 ± 50 Yes No SOLDERING: This component is suited to the following methods: Infrared Reflow Soldering in accordance with IEC61760-1 PTS841 GKP SMTR LFS 250 ± 50 Yes No PTS841 ESD GM SMTR LFS 180 ± 50 No Yes PTS841 ESD GK SMTR LFS 250 ± 50 No Yes PTS841 ESD GMP SMTR LFS 180 ± 50 Yes Yes PTS841 ESD GKP SMTR LFS 250 ± 50 Yes Yes Packaging In reels of 3,000 pieces Dimensions of reels according to EIA 481B External diameter 330 mm NOTE: • Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. • The PTS series is not certified for using in Automotive application and no PPAP. However, in the case of some automotive accessories and specific applications for 2 and 3 wheeled vehicles the PTS is widely used and very suitable. Please contact your local C&K representative to discuss your application and the best switch solution. How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. For any part number different from those listed above, please consult your local representative. P T S 8 4 S M T 1 ESD Pin None No ESD Pin ESD Yes R L F S LFS RoHS, silver plated Packaging SMTR Tape & reel SMT Style G Gullwing Pegs* None no peg P with pegs Actuation Force M 180 gf K 250 gf Design Recommendations * When a precise alignment between application button and the switch is requested, version with pegs are the right choice to limit the possible floating of the switch during solderability. Dimensions Dimensions are shown: mm are shown: mm Specifications Specifications and and dimensions dimensions subject subject to change to change 14 Nov 22 B–55 www.ckswitches.com www.ckswitches.com Tactile Switches Specifications PTS841 Series Microminiature SMT Side Actuated G SMT Leads with ESD and Peg options B Tactile Switches CIRCUIT DIAGRAM P.C.B LAND DIMENSION TAPE & REEL 剖视 Dimensions are shown: mm Specifications and dimensions subject to change 14 Nov 22 B–56 www.ckswitches.com