RTAP4EW10W25NS

RTA Series 1–4 Poles Coded Rotary Switches Features/Benefits • PCB or hand soldering versions • Bushing mounting • Multiple poles • Decimal and hexadecimal codes • Screwdriver slot or extended actuator • RoHS Compliant Electrical Data SWITCHING MODE: MAX. SWITCHING POWER MAX. SWITCHING CURRENT: MAX. CARRYING CURRENT: NOMINAL VOLTAGE AT 50 Hz CONTACT RESISTANCE: DIELECTRIC STRENGTH AT 50 Hz BETWEEN CONTACTS AND GROUND TERMINALS: INSULATION RESISTANCE BETWEEN CONTACTS OR CONTACTS AND FRAME (500 V =): NO. OF OPERATIONS: BOUNCE: Mechanical Data Silver Gold BBM BBM 5 VA 0.5 VA 150 mA 20 mA 5 A 1A 60 V 25 V < 150 mΩ < 150 mΩ 500 V r 500 V r 109 Ω 10,000 < 5 ms 109 Ω 10,000 < 5 ms MAX. NO. OF BANKS: 1. OPERATING TORQUE: 5 Ncm±20%. END STOP TORQUE: 50 Ncm. minimum STOP: With/without or adjustable MOUNTING: By fixed index 9.5 mm (0.374) of center, for bushing mount only Materials BUSHING/HOUSING: PETP Thermoplastic STATIONARY CONTACTS & TERMINALS: Nickel Plated Brass with additional plating of Gold or Silver. ROTOR: Gold or Silver plated Brass or PCB. CODING PLATE: PA thermoplastic ACTUATOR: Polysulfon thermoplastic HARDWARE: Stop pin: Aluminum. Ball & Spring: Stainless steel. Washer: PA. Nut: Brass. Environmental Data Rotary K OPERATING TEMPERATURE: –20ºC to + 70ºC –20ºC to + 70ºC STORAGE TEMPERATURE: –40ºC to + 85ºC –40ºC to + 85ºC Typical Applications • Appliances • Electronic alarm systems • Medical • Building automation • HVAC air conditioning NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages K-9 thru K-12. For additional options not shown in catalog, consult Customer Service Center. Designation RTA Indexing 3 30° index (12 positions max.) 4 36° index (10 positions max.) Termination P With PC Thru-hole Switch Function H Horizontal with 1W12 SP, 30° Index, 12 pos. no stop PC Thru-hole 1W10 SP, 36° Index, 10 pos. no stop 1S02 SP, 30° /36° Index, 2 pos. 1S03 SP, 30° /36° Index, 3 pos. 1S04 SP, 30° /36° Index, 4 pos. 1S05 SP, 30° /36° Index, 5 pos. 1S06 SP, 30° /36° Index, 6 pos. 1S07 SP, 30° /36° Index, 7 pos. 1S08 SP, 30° /36° Index, 8 pos. 1S09 SP, 30° /36° Index, 9 pos. 1S10 SP, 30° /36° Index, 10 pos. 1S11 SP, 30° Index, 11 pos. 1S12 SP, 30° Index, 12 pos. 2S02 DP, 30° /36° Index, 2 pos. 2S03 DP, 30° /36° Index, 3 pos. 2S04 DP, 30° /36° Index, 4 pos. 2S05 DP, 30° /36° Index, 5 pos. 2S06 DP, 30° Index, 6 pos. Contact Material S Silver plated, matte-tin terminal P Gold plated, matte-tin terminal 4S02 4P, 30° /36° Index, 2 pos. EW10 Direct + complement, 36º Index, no stop EW12 Direct + complement, 30º Index, no stop ES—— Direct + complement, 30º/36º Index, with stop (specify stop position) Mounting Style W Without bushing R 3/8-32 Threaded Bushing M M10x.75 Metric Threaded Bushing A 3/8-32 Threaded Bushing with Offset Bracket B M10x.75 Metric Threaded Bushing with Offset Bracket Actuator (max.) 25N .984 (25,0) with screwdriver slot 50N 1.97 (50,0) with screwdriver slot FLS ­Flush shaft with screwdriver slot and position indicator 25F .984 (25,0) Shaft with flat 06F ­.236 (6,0) Shaft with flat C D 3/8-32 Threaded Bushing with Straight Bracket M10x.75 Metric Threaded Bushing with Straight Bracket Dimensions are shown: Inch (mm) Specifications and dimensions subject to change 4 Mar 21 K–8 www.ckswitches.com RTA Series 1-4 Poles Coded Rotary Switches DESIGNATION RTA Generic View TERMINATION P WITH PC PINS .016 (0,4) .028 TYP. (0,7) SCALE 2.000 1.016 (25,8) .100 TYP. (2,5) .150 (3,8) .866 (22,0) H .600 (15,2) 1.000 (25,4) Horizontal with PC Thru-hole Note: .618 ( 15,7 ) K Rotary 7X .028 ( 0,7 ) “H” termination only available with the following options: 1. With A or B mounting styles 2. 36º degree indexing 3. Up to 5 positions max 6X .100 ( 2,54 ) .302 ( 7,67 ) .600 ( 15,24 ) INDEXING 3  30 index, 12 positions max. 4  36 index, 10 positions max. Both commons must be connected by user to ground. Third Angle Projection Dimensions are shown: Inch (mm) Specifications and dimensions subject to change 4 Mar 21 K–9 www.ckswitches.com RTA Series 1-4 Poles Coded Rotary Switches SWITCH FUNCTION NO. POLES SP MODEL NO. SWITCH FUNCTION 1W12 1W10 12 Positions No Stop 10 Positions No Stop 1S02 2 Positions 1S03 3 Positions 30º/36º 1S05 5 Positions 30º/36º 1S06 6 Positions 30º/36º 1S08 8 Positions 30º/36º 1S09 9 Positions 30º/36º MODEL NO. SWITCH FUNCTION 30º 2W05 36º 2W06 5 Positions No Stop 6 Positions No Stop 30º/36º 2S02 2 Positions 30º/36º 2S03 3 Positions 30º/36º 2S04 4 Positions 30º/36º 2S05 5 Positions 30º/36º 2S06 6 Positions 30º 4S02 2 Positions 30º/36º C0 1S10 10 Positions 30º/36º 1S11 11 Positions 30º 1S12 12 Positions 30º Pos. C1 Rotary 1 POLE 4P MODELS SCHEMATIC C2 C1 C2 C3 C4 4P Pos. 11 21 31 41 51 61 12 22 32 42 52 62 MODEL NO. Pos. 1 1 21 12 22 13 2 3 SWITCH FUNCTION EW10 EW12 INDEX 30º/36º 30º 14 2 4 INDEX 36º Direct + complement, No stop Direct + complement, No stop 30º Direct + complement, with stop (specify stop position) 30º & 36º 30º 36º Pos. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 M,N L,N C • • • • • • • • • • • • • • • • H D 1 • • • • • • • • D B 2 • • • • • • • • A I 4 • • • • • • • • J J 8 • • • • • • • • C K 1 • • • • • • • • K H 2 • • • • • • • • B A 4 • • • • • • • • I C 8 • • • • • • • • K DP DP MODELS SCHEMATIC ES—— NO. POLES SP MODELS SCHEMATIC INDEX Term. Term. Indexing Option Code 3, 30 INDEXING ANGLE PCB LAYOUT 1 POLE 21 POLES POLE 23 POLES POLES 34 POLES POLES BCD +4COMPLEMENTS POLES BCD + COMPLEMENTS Indexing Option Code 4, 36 INDEXING ANGLE PCB LAYOUT NOTE: Layout view from component side. Common terminals that are in locations A-G are not connected to common terminals that are in locations H-N. For 7-12 position output customer must tie these commons together. 21POLES POLE 3 2 POLES 34 POLES BCD +4COMPLEMENTS POLES BCD + COMPLEMENTS Third Angle Projection Dimensions are shown: Inch (mm) Specifications and dimensions subject to change 4 Mar 21 K–10 www.ckswitches.com RTA Series 1-4 Poles Coded Rotary Switches MOUNTING STYLE W  WITHOUT BUSHING M  M10 x .75 MERTIC THREADED BUSHING .60 ( 15,2 ) .60 ( 15,2 ) 14X ø.04 ( 0,9 ) 6X .10 ( 2,5 ) N ML K J I H 14X ø.04 ( 0,9 ) 6X .10 ( 2,5 ) .495 (12,6) 1.00 ( 25,4 ) .732 (18,6) 1.00 ( 25,4 ) G F E DC B A .402 DIA. (10,2ø) Note: M mounting style not available with H termination. R  3/8-32 THREADED BUSHING A  3/8-32 THREADED BUSHING WITH BRACKET PANEL MOUNTING .385 DIA (9.8 Ø) .134 DIA. (3,4ø) .374 (9,5) G F E DC B A Note: W mounting style not available with H termination. .874 ( 22,2 ) PANEL MOUNTING .134 (3.4Ø) .338 ( 8,59 ) .385 DIA (9.8 Ø) .374 (9.5) 3/8 - 32 UNEF .338 ( 8,59 ) .618 ( 15,7 ) .19 ( 4,8 ) .60 ( 15,2 ) .60 ( 15,2 ) .874 ( 22,2 ) 14X ø.04 ( 0,9 ) 6X .10 ( 2,5 ) PANEL MOUNTING N ML K J I H M10 METRIC G F E DC B A N ML K J I H 7X ø.04 ( 0,9 ) 1.00 ( 25,4 ) .071 ( 1,8 ) 2X ø.08 ( 2,1 ) .600 ( 15,2 ) .031 ( 0,8 ) .188 ( 4,8 ) 6X .10 ( 2,5 ) .30 ( 7,6 ) G F E DC B A Note: A mounting style only available with H termination. Note: R mounting style not available with H termination. C  3/8-32 THREADED BUSHING WITH STRAIGHT BRACKET B  M10 x .75 METRIC THREADED BUSHING WITH BRACKET .874 ( 22,2 ) .735 (18,67) PANEL MOUNTING .385 DIA (9.8 Ø) .618 (15,7) .19 ( 4,8 ) .60 ( 15,2 ) 2X ø.08 ( 2,1 ) G F E DC B A 7X ø.04 ( 0,9 ) .071 (1,8) .031 (0,8) .188 (4,77) .600 (15,24) 6X .10 ( 2,5 ) .071 ( 1,8 ) .32 ( 8,1 ) R Mounting 7X ø .04 ( 0,9 ) .30 ( 7,6 ) .600 ( 15,24 ) .031 ( 0,8 ) .318 ( 8,07 ) .60 ( 15,2 ) 2X ø.08 (2) G F E DC B A 6X.10 ( 2,5 ) .30 ( 7,6 ) Note: B mounting style only available with H termination. D   M10 x .75 METRIC THREADED BUSHING WITH STRAIGHT BRACKET PANEL MOUNTING .32 ( 8,1 ) 7X ø .04 ( 0,9 ) .618 ( 15,7 ) .60 ( 15,2 ) .735 ( 18,67 ) 2X ø.08 (2) G F E DC B A 6X.10 ( 2,5 ) .30 ( 7,6 ) .071 ( 1,8 ) .031 0,8 () .600 ( 15,24 ) .318 ( 8,07 ) Third Angle Projection Dimensions are shown: Inch (mm) Specifications and dimensions subject to change 4 Mar 21 K–11 K Rotary .618 ( 15,7 ) PANEL MOUNTING www.ckswitches.com RTA Series 1-4 Poles Coded Rotary Switches ACTUATOR 25N  .984 (25,0) WITH SCREWDRIVER SLOT 50N  1.97 (50,0) WITH SCREWDRIVER SLOT .177 ( 4,5 ) .177 ( 4,5 ) .039 (1) .039 ( 1) Ø.236 (6) Ø.236 (6 ) 1.969 ( 50 ) .984 ( 25 ) FLS  FLUSH SHAFT WITH SCREWDRIVER SLOT AND POSITION INDICATOR 25F  .984 (25,0) SHAFT WITH FLAT .984 (25,0) .091 (2,3) .945 (24,0) .220 DIA. (5,6Ø) .039 (1,0) .157 (4,0) 30 Note: only available with “W” Mounting Style Note: only available with “W” Mounting Style 06F  .236 (6,0) SHAFT WITH FLAT .197 ( 5,0 ) 50N Actuator with Screw Driver Slot .157 ( 4,0 ) Rotary K .236 ( 6,0 ) Note: only available with “W” Mounting Style CONTACT MATERIAL OPTION CODE CONTACT AND TERMINAL MATERIAL RATING S SILVER LOW LEVEL/DRY CIRCUIT P GOLD LOW LEVEL/DRY CIRCUIT OR POWER SWITCH: 150 mA MAXIMUM, 60 V NOMINAL. POWER: 5 VA MAXIMUM. CARRY-5 AMPS MAXIMUM. SWITCH: 20 mA MAXIMUM, 25 V NOMINAL. POWER: 0.5 VA MAXIMUM. CARRY: 1 AMP MAXIMUM. * Note: See Technical Data section of this catalog for RoHS compliant and compatible definition and specifications. AVAILABLE HARDWARE Mounting Nuts Stop pins Lockwasher 06F Actuator with Screw Driver Slot PART NO. PART NO. PART NO. PART NO. 472706201 Standard 495100201 Metric Y200300200PCH 472800202 NOTE: Additional nuts and lockwashers available separately, see section “Technical Data and Additional Hardware”. Third Angle Projection Dimensions are shown: Inch (mm) Specifications and dimensions subject to change 4 Mar 21 K–12 www.ckswitches.com