SDP002

REVISIONS 1,5±0,1 1,7 0,89 1,42 R0,2 0,4 3 0,2 SCALE 6:1 B A ECN SYM 11061 A SDP002 DESCRIPTION DATE 0,2 2±0,05 APPROVAL 9/25/12 RELEASED TO PRODUCTION 1,2±0,1 A JT 0,8 0,05 2X HOLES 1,5 PIVOT 3 0,2 1,15 2 1 1,85±0,1 2±0,1 2 3,05±0,1 1,6 3 COM 1 2X 0,5 5,1±0,1 2,3 (68,3°) 3,6 5X 0 0,05 TERMINAL HEIGHT WITHIN 0,08 TO MOUNTING SURFACE 0,4±0,1 2X 0,15 CHAMFER 0,7 0 -0,07 (29,2°) 2X 1,36 1,8 2,4 2±0,05 1 2 3 4 5 MATERIAL FINISH BASE COVER ACTUATOR TERMINALS LCP PA PA COPPER ALLOY MBNi - Ag MOVEABLE IRON ALLOY MFNi - Ag COLOR BLACK BLACK BLACK SDP002-OL_A UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MM OUTLINE DRAWING TOLERANCES THIS DOCUMENT AND THE INFORMATION IN IT IS THE EXCLUSIVE PROPERTY OF C&K COMPONENTS, INC., AND IS NOT TO BE USED OR DISCLOSED WITHOUT THE EXPRESS WRITTEN PERMISSION OF C&K COMPONENTS. LINEAR 0,2 SCALE CRITICAL - MUST COMPLY WITH C&K QUALIFICATION STD. CKQI0019 MAJOR DIMENSION 2X 0,7 NO PCB TRACES SHALL BE PLACED IN SHADED AREAS 3 ALL DIMS. AND TOLS. PER ANSI Y14.5 2,6 2 1 MAX TRAVEL CAD FILE NO.: No DESCRIPTION 0,8 0,05 2,67±0,2 ON STARTING POSITION 2X REFERENCE PCB MOUNTING A 4,7 3,7±0,1 A 4 3X 0,5 0,3 0,8±0,1 SCHEMATIC B SDP002 2,85 REV. 2,2 ANGULAR 3,0 DATE 12:1 DRAWN 22-Jan-10 APPROVED CAB SDP002 SDP-SERIES COMPONENTS REF NO. N_SDP-SERIES SDP002 SHT.NO. 1 OF REV. A 2 REVISIONS ECN 4±0,1 1,5 +0,1 0 1,75±0,1 SYM DESCRIPTION A DATE APPROVAL SEE PAGE 1 (2,3) 2±0,1 SDP002 2.0 0.5 (0,4) 13.0 0.5 21.0 0.8 7,5 16±0,3 50.0 SECTION A-A 380.0 13.0 21.0 18.0 REV. REEL NOT TO SCALE A 8±0,1 SDP002 COVER TAPE NOTES: 1. PACKAGE QUANTITY: 4,550 PCS/REEL. 2. THE REEL CARRIER TAPE WILL HAVE A LEAD OF 29 EMPTY COMPONENT POCKETS AND AN END OF 29 EMPTY COMPONENT POCKETS ON EVERY REEL. ALL EMPTY COMPONENT POCKETS WILL BE SEALED WITH COVER TAPE. 3. AFTER THE LEAD, NO REEL CARRIER TAPE SHALL HAVE MORE THAN TWO CONSECUTIVE EMPTY COMPONENT POCKETS. 4. THIS PART IS RoHS COMPLIANT AND MEETS ALL REQUIREMENTS OF RoHS DIRECTIVE 2002/95/EC CAD FILE NO.: ALL DIMS. AND TOLS. PER ANSI Y14.5 UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MM OUTLINE DRAWING TOLERANCES THIS DOCUMENT AND THE INFORMATION IN IT IS THE EXCLUSIVE PROPERTY OF C&K COMPONENTS, INC., AND IS NOT TO BE USED OR DISCLOSED WITHOUT THE EXPRESS WRITTEN PERMISSION OF C&K COMPONENTS. LINEAR 0.38 SCALE CRITICAL - MUST COMPLY WITH C&K QUALIFICATION STD. CKQI0019 MAJOR DIMENSION SDP002-OL_A ANGULAR 3,0 DATE 3:1 DRAWN 25-Jan-10 APPROVED CAB SDP002 SDP-SERIES COMPONENTS REF NO. N_SDP-SERIES SDP002 SHT.NO. 2 OF REV. A 2