T101HABE

T Series Subminiature Toggle Switches Features/Benefits • Compact size—small footprint • Single and double pole models • PC and panel mount options available Typical Applications • Hand-held telecommunications • Instrumentation • Medical equipment • RoHS compliant models available Models Available Specifications CONTACT RATING: B contact material: 0.4 VA max. @ 20 V AC or DC max. Q contact material (TX01 models): 3 AMPS @ 120 V AC or 28 V DC. All other models: 2 AMPS @ 120 V AC or 28 V DC. See page F-42 for additional ratings. ELECTRICAL LIFE: TX01 models: 60,000 make-and-break cycles at full load. All other models: 30,000 cycles. CONTACT RESISTANCE: Below 20 m Ω typ. initial @ 2-4 V DC, 100 mA, for both silver and gold plated contacts. INSULATION RESISTANCE: 109 Ω min. DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level. OPERATING TEMPERATURE: –30ºC to 85ºC. SOLDERABILITY: Per MIL-STD-202F method 208D, or EIA RS-186E method 9 (1 hour steam aging). NOTE: Any models supplied with P, R, Q, B or G contact material are RoHS compliant and compatible. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Materials CASE: Glass filled nylon 6/6, flame retardant, heat stabilized or diallyl phthalate (DAP), (UL 94V-0) or glass filled nylon 4/6, flame retardant, heat stabilized. ACTUATOR: Brass, chrome plated. BUSHING: Brass, nickel plated. HOUSING: Stainless steel. SWITCH SUPPORT: Brass, matte-tin plated. END CONTACTS: B contact material: Copper alloy, with gold plate over nickel plate. Q contact material: Coin silver, silver plated. See above for additional contact materials. CENTER CONTACTS & TERMINALS: B contact material: Copper alloy, with gold plate over nickel plate. Q contact material: Copper alloy, silver plated. See page F-42 for additional contact materials. TERMINAL SEAL: Epoxy. HARDWARE: Nut & Locking Ring: Brass, nickel plated. Lockwasher: Steel, nickel plated. Additional hardware available separately, see Section N. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages F-38 thru F-42. For additional options not shown in catalog, consult Customer Service Center. All models have epoxy terminal seal and are compatible with all “bottom-wash” PCB cleaning methods. Switch Function T101 SPDT On-None-On T102 SPDT Off-None-On T103 SPDT On-Off-On T105 SPDT Mom.-Off-Mom. T107 SPDT On-Off-Mom. T108 SPDT On-None-Mom. T201 DPDT On-None-On T203 DPDT On-Off-On T205 DPDT Mom.-Off-Mom. T207 DPDT On-Off-Mom. T208 DPDT On-None-Mom. T211 DPDT On-On-On. Actuator P3 Flatted, anti-rotation, .490" high S .370" high K Locking lever, round tip L1 .620" high M1 .220" high S1 .410" high M .210" high L .290" high Bushing H .220" high, threaded, flat H9 .220" high, unthreaded, flat CF Splashproof, .310" high, threaded, flat D9 .260" high, unthreaded, keyway T .310" high, threaded, flat T9 .310" high, unthreaded, flat TD .260" high, threaded, keyway TK .310" high, threaded, keyway Y .220" high, threaded, keyway Y9 .220" high, unthreaded, keyway Terminations A Right angle, PC thru-hole AV Vertical right angle, PC thru-hole C PC Thru-hole V3 Vertical mount V-bracket Z Solder lug W Wire wrap Contact Material B Gold P Gold, matte tin Q Silver G Gold over silver R Gold over silver, matte-tin Seal E Epoxy F Toggle Dimensions are shown: Inches (mm) Specifications and dimensions subject to change F–37 www.ck-components.com T Series Subminiature Toggle Switches SWITCH FUNCTION SWITCH FUNCTION POS. 1 POS. 2 POS. 3 CONNECTED TERMINALS POS. 2 POS. 1 POS. 3 NO. POLES MODEL NO. C&K marking on opposite side ON ON MOM. ON ON OFF NONE OFF OFF OFF NONE NONE ON ON MOM. MOM. MOM. ON C&K marking on opposite side 2-3 N/A 2-1 SCHEMATIC T101 T103 T105 SP 2-3 OPEN 2-1 T107 T108 T102 SPDT 2-3 OPEN NA N/A 2-1 3-1 SPDT SPST .338 (8,57) Part number shown: T101SHZQE SWITCH FUNCTION POS. 1 POS. 2 POS. 3 POS. 1 CONNECTED TERMINALS POS. 2 POS. 3 NO. POLES MODEL NO. C&K marking on opposite side ON ON MOM. ON ON NONE OFF OFF NONE ON ON ON C&K marking on opposite side 2-3,5-6 N/A 2-1,5-4 SCHEMATIC T201 T203 DP 2-3,5-6 OPEN 2-1,5-4 T205 T208 T211* MOM. MOM. ON. 2-3,5-6 2-3,5-6 N/A 2-3,5-4 2-1,5-4 2-1,5-4 DPDT DPDT .338 (8,57) Part number shown: T201SHZQE Terminal Nos. For Reference Only F MOM. = Momentary Toggle All models with all options when ordered with G, L, R or Q contact material. Dimensions are shown: Inches (mm) Dimensions are shown: IN (mm) Specifications and and dimensions subject to change Specifications dimensions subject to change F–38 G–37 www.ck-components.com www.ittcannon.com T Series Subminiature Toggle Switches ACTUATOR M .210" HIGH S .370" HIGH M1 .220" HIGH (with “T” bushing) S1 .410" HIGH (with “T” bushing) 1 1 .214 (5,44) 2 2 Standard with A, AV or V3 terminations. Standard with Z, C or W terminations. L .290" HIGH L1 .620" HIGH P3 ANTI-ROTATION, FLATTED, .450" HIGH 2 1 1 Actuator shown with standard H bushing. Subtract .040 (1,02) for TD and D9 bushings, subtract .090 (2,29) for T, T9, TK, K9 & CF bushings. Actuators shown with T, T9, TK & CF bushings, add .050 (1,27) for TD and D9 bushings, add .090 (2,29) for H, H9, Y & Y9 bushings. All actuators have chrome finish (except K). 2 Available with T & T9 bushings only. Dress nut part number 709901201 supplied standard with threaded bushing. K LOCKING LEVER Locking Positions –01 & –02 Models 2 Position lock –03 & –11 Models 3 Position lock –08 Models 1 Position lock K actuators have natural aluminum finish. Keyway on right side. To prevent accidental actuation, toggles must be lifted before being actuated. When released, toggles again lock in place. Overtightening mounting nut may cause actuator to bind. Not available with CF bushing option. Bushing option code not required. Not available with TX05 & TX07 models. BUSHING H H9 .220" HIGH THREADED, FLAT .220" HIGH UNTHREADED, FLAT Y Y9 .220" HIGH THREADED, KEYWAY .220" HIGH UNTHREADED, KEYWAY T T9 .310" HIGH THREADED, FLAT .310" HIGH UNTHREADED, FLAT F Toggle H standard with C, W & Z terminations. H9 standard with A, AV & V3 terminations. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change F–39 www.ck-components.com T Series Subminiature Toggle Switches BUSHING TK .310" HIGH THREADED, KEYWAY TD D9 .260" HIGH THREADED, KEYWAY .260" HIGH UNTHREADED, KEYWAY CF SPLASHPROOF, .310" HIGH THREADED, FLAT IP67 Degree of protection. Internal o-ring actuator seal and external bushing seal washer standard. Not available with K locking lever option. 10-48 BUSHING PANEL MOUNTING 1/4 IN. BUSHING With Standard Locking Ring Without Locking Ring Without Locking Ring Without Locking Ring Without Locking Ring With Small Locking Ring With Standard Locking Ring TERMINATIONS Z SOLDER LUG C SP DP PC THRU-HOLE SP DP PC MOUNTING Not available with P or R contact materials. T102 – omit center hole. W WIRE WRAP SP DP F Toggle Dimensions are shown: Inches (mm) Specifications and dimensions subject to change F–40 www.ck-components.com T Series Subminiature Toggle Switches TERMINATIONS A RIGHT ANGLE, PC THRU-HOLE .214 (5,44) PC MOUNTING .022 (0,56) .128 (3,25) T101MH9ABE Actuator Shown In Pos. 1 Horizontal Actuation SPDT PC MOUNTING Not available with T102 model. A RIGHT ANGLE, PC THRU-HOLE T201MH9ABE Horizontal Actuation Actuator Shown In Pos. 1 DPDT AV VERTICAL RIGHT ANGLE, PC THRU-HOLE .214 (5,44) .026 (0,66) PC MOUNTING .153 (3,89) T101MH9AVBE Vertical Actuation Actuator Shown In Pos. 1 T102 Models: Omit terminal 2 NOTE: Terminal bend radii and lead-in manufacturing option. SPDT AV VERTICAL RIGHT ANGLE, PC THRU-HOLE PC MOUNTING Actuator Shown In Pos. 1 T201MH9AVBE Vertical Actuation NOTE: Terminal bend radii and lead-in manufacturing option. DPDT V3 VERTICAL MOUNT, V-BRACKET PC MOUNTING Actuator Shown In Pos. 1 .214 (5,44) .358 (9,08) F Toggle T101MH9V3BE T102 Models: Omit center hole. T102 Models: Omit terminal 2 SPDT Dimensions are shown: Inches (mm) Specifications and dimensions subject to change F–41 www.ck-components.com T Series Subminiature Toggle Switches TERMINATIONS V3 VERTICAL MOUNT, V-BRACKET PC MOUNTING T201MH9V3BE DPDT Actuator Shown In Pos. 1 CONTACT MATERIAL OPTION CODE CONTACT MATERIAL TERMINAL PLATING GOLD 1 MATTE-TIN 6 RATINGS B P GOLD 1 LOW LEVEL/ DRY CIRCUIT 0.4 VA MAX. @ 20 V AC OR DC MAX. Q G R SILVER 4,5 SILVER 5 POWER TX01 MODELS: 3 AMPS @ 120 V AC OR 28 V DC. ALL OTHER MODELS: 2 AMPS @ 120 V AC OR 28 V DC. GOLD OVER SILVER 2,3 GOLD 3 MATTE-TIN 6 LOW LEVEL/DRY CIRCUIT OR POWER TX01 MODELS: 0.4 VA MAX @ 20 V AC OR DC MAX. OR 3 AMPS @ 120 V AC OR 28 V DC. ALL OTHER MODELS: 0.4 VA MAX @ 20 V AC OR DC MAX. OR 2 AMPS @ 120 V AC OR 28 V DC. * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. 1 2 3 4 5 6 CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate. END CONTACTS: Coin silver, with gold plate over nickel plate. CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate over nickel plate. END CONTACTS: Coin silver, silver plated. CENTER CONTACT & ALL TERMINALS: Copper alloy, silver plated. TERMINALS: Copper alloy, with matte-tin over nickel plate. All models with all options when ordered with R, G, or Q contact material. B contact material standard with A, AV, V3 & W terminations. Q contact material standard with C & Z terminations. SEAL E EPOXY SEAL AVAILABLE HARDWARE 759D02000 SEALING BOOT .331 (8,4) F Toggle * Note: For use with S1 actuator style when combined with T, TK, and CF bushings. 1/4-40 uns-2A nut .524 (13,3) .658 (16,7) Dimensions are shown: Inches (mm) Specifications and dimensions subject to change F–42 www.ck-components.com