T Series Subminiature Toggle Switches
Features/Benefits • Compact size—small footprint • Single and double pole models • PC and panel mount
options available
Typical Applications • Hand-held telecommunications • Instrumentation • Medical equipment
• RoHS compliant models available
Models Available
Specifications
CONTACT RATING: B contact material: 0.4 VA max. @ 20 V AC or DC max. Q contact material (TX01 models): 3 AMPS @ 120 V AC or 28 V DC. All other models: 2 AMPS @ 120 V AC or 28 V DC. See page F-42 for additional ratings. ELECTRICAL LIFE: TX01 models: 60,000 make-and-break cycles at full load. All other models: 30,000 cycles. CONTACT RESISTANCE: Below 20 m Ω typ. initial @ 2-4 V DC, 100 mA, for both silver and gold plated contacts. INSULATION RESISTANCE: 109 Ω min. DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level. OPERATING TEMPERATURE: –30ºC to 85ºC. SOLDERABILITY: Per MIL-STD-202F method 208D, or EIA RS-186E method 9 (1 hour steam aging).
NOTE: Any models supplied with P, R, Q, B or G contact material are RoHS compliant and compatible. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center.
Materials
CASE: Glass filled nylon 6/6, flame retardant, heat stabilized or diallyl phthalate (DAP), (UL 94V-0) or glass filled nylon 4/6, flame retardant, heat stabilized. ACTUATOR: Brass, chrome plated. BUSHING: Brass, nickel plated. HOUSING: Stainless steel. SWITCH SUPPORT: Brass, matte-tin plated. END CONTACTS: B contact material: Copper alloy, with gold plate over nickel plate. Q contact material: Coin silver, silver plated. See above for additional contact materials. CENTER CONTACTS & TERMINALS: B contact material: Copper alloy, with gold plate over nickel plate. Q contact material: Copper alloy, silver plated. See page F-42 for additional contact materials. TERMINAL SEAL: Epoxy. HARDWARE: Nut & Locking Ring: Brass, nickel plated. Lockwasher: Steel, nickel plated. Additional hardware available separately, see Section N.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages F-38 thru F-42. For additional options not shown in catalog, consult Customer Service Center. All models have epoxy terminal seal and are compatible with all “bottom-wash” PCB cleaning methods.
Switch Function T101 SPDT On-None-On T102 SPDT Off-None-On T103 SPDT On-Off-On T105 SPDT Mom.-Off-Mom. T107 SPDT On-Off-Mom. T108 SPDT On-None-Mom. T201 DPDT On-None-On T203 DPDT On-Off-On T205 DPDT Mom.-Off-Mom. T207 DPDT On-Off-Mom. T208 DPDT On-None-Mom. T211 DPDT On-On-On.
Actuator P3 Flatted, anti-rotation, .490" high S .370" high K Locking lever, round tip L1 .620" high M1 .220" high S1 .410" high M .210" high L .290" high
Bushing H .220" high, threaded, flat H9 .220" high, unthreaded, flat CF Splashproof, .310" high, threaded, flat D9 .260" high, unthreaded, keyway T .310" high, threaded, flat T9 .310" high, unthreaded, flat TD .260" high, threaded, keyway TK .310" high, threaded, keyway Y .220" high, threaded, keyway Y9 .220" high, unthreaded, keyway
Terminations A Right angle, PC thru-hole AV Vertical right angle, PC thru-hole C PC Thru-hole V3 Vertical mount V-bracket Z Solder lug W Wire wrap Contact Material B Gold P Gold, matte tin Q Silver G Gold over silver R Gold over silver, matte-tin
Seal E Epoxy
F
Toggle
Dimensions are shown: Inches (mm) Specifications and dimensions subject to change
F–37
www.ck-components.com
T Series Subminiature Toggle Switches
SWITCH FUNCTION
SWITCH FUNCTION POS. 1 POS. 2 POS. 3 CONNECTED TERMINALS POS. 2
POS. 1
POS. 3
NO. POLES
MODEL NO.
C&K marking on opposite side ON ON MOM. ON ON OFF NONE OFF OFF OFF NONE NONE ON ON MOM. MOM. MOM. ON
C&K marking on opposite side 2-3 N/A 2-1
SCHEMATIC
T101 T103 T105
SP
2-3
OPEN
2-1
T107 T108 T102
SPDT
2-3 OPEN
NA N/A
2-1 3-1
SPDT SPST
.338 (8,57)
Part number shown: T101SHZQE
SWITCH FUNCTION POS. 1 POS. 2 POS. 3
POS. 1
CONNECTED TERMINALS POS. 2
POS. 3
NO. POLES
MODEL NO.
C&K marking on opposite side ON ON MOM. ON ON NONE OFF OFF NONE ON ON ON
C&K marking on opposite side
2-3,5-6 N/A 2-1,5-4
SCHEMATIC
T201 T203
DP
2-3,5-6
OPEN
2-1,5-4
T205 T208 T211*
MOM. MOM. ON. 2-3,5-6 2-3,5-6 N/A 2-3,5-4 2-1,5-4 2-1,5-4
DPDT
DPDT
.338 (8,57)
Part number shown: T201SHZQE
Terminal Nos. For Reference Only
F
MOM. = Momentary
Toggle
All models
with all options when ordered with G, L, R or Q contact material.
Dimensions are shown: Inches (mm) Dimensions are shown: IN (mm) Specifications and and dimensions subject to change Specifications dimensions subject to change
F–38 G–37
www.ck-components.com www.ittcannon.com
T Series Subminiature Toggle Switches
ACTUATOR
M
.210" HIGH
S
.370" HIGH
M1
.220" HIGH (with “T” bushing)
S1
.410" HIGH (with “T” bushing)
1 1
.214 (5,44)
2 2
Standard with A, AV or V3 terminations.
Standard with Z, C or W terminations.
L
.290" HIGH
L1
.620" HIGH
P3
ANTI-ROTATION, FLATTED, .450" HIGH
2 1
1
Actuator shown with standard H bushing. Subtract .040 (1,02) for TD and D9 bushings, subtract .090 (2,29) for T, T9, TK, K9 & CF bushings. Actuators shown with T, T9, TK & CF bushings, add .050 (1,27) for TD and D9 bushings, add .090 (2,29) for H, H9, Y & Y9 bushings. All actuators have chrome finish (except K).
2
Available with T & T9 bushings only. Dress nut part number 709901201 supplied standard with threaded bushing.
K
LOCKING LEVER
Locking Positions
–01 & –02 Models 2 Position lock
–03 & –11 Models 3 Position lock
–08 Models 1 Position lock
K actuators have natural aluminum finish. Keyway on right side. To prevent accidental actuation, toggles must be lifted before being actuated. When released, toggles again lock in place. Overtightening mounting nut may cause actuator to bind.
Not available with CF bushing option. Bushing option code not required. Not available with TX05 & TX07 models.
BUSHING
H H9
.220" HIGH THREADED, FLAT .220" HIGH UNTHREADED, FLAT
Y Y9
.220" HIGH THREADED, KEYWAY .220" HIGH UNTHREADED, KEYWAY
T T9
.310" HIGH THREADED, FLAT .310" HIGH UNTHREADED, FLAT
F
Toggle
H standard with C, W & Z terminations. H9 standard with A, AV & V3 terminations.
Dimensions are shown: Inches (mm) Specifications and dimensions subject to change
F–39
www.ck-components.com
T Series Subminiature Toggle Switches
BUSHING
TK
.310" HIGH THREADED, KEYWAY
TD D9
.260" HIGH THREADED, KEYWAY .260" HIGH UNTHREADED, KEYWAY
CF
SPLASHPROOF, .310" HIGH THREADED, FLAT
IP67 Degree of protection. Internal o-ring actuator seal and external bushing seal washer standard. Not available with K locking lever option.
10-48 BUSHING
PANEL MOUNTING
1/4 IN. BUSHING
With Standard Locking Ring
Without Locking Ring
Without Locking Ring
Without Locking Ring
Without Locking Ring
With Small Locking Ring
With Standard Locking Ring
TERMINATIONS
Z
SOLDER LUG
C
SP DP
PC THRU-HOLE
SP DP
PC MOUNTING
Not available with P or R contact materials.
T102 – omit center hole.
W
WIRE WRAP
SP DP
F
Toggle
Dimensions are shown: Inches (mm) Specifications and dimensions subject to change
F–40
www.ck-components.com
T Series Subminiature Toggle Switches
TERMINATIONS
A
RIGHT ANGLE, PC THRU-HOLE
.214 (5,44)
PC MOUNTING
.022 (0,56)
.128 (3,25)
T101MH9ABE
Actuator Shown In Pos. 1
Horizontal Actuation
SPDT
PC MOUNTING
Not available with T102 model.
A
RIGHT ANGLE, PC THRU-HOLE
T201MH9ABE Horizontal Actuation
Actuator Shown In Pos. 1
DPDT
AV
VERTICAL RIGHT ANGLE, PC THRU-HOLE
.214 (5,44) .026 (0,66)
PC MOUNTING
.153 (3,89)
T101MH9AVBE Vertical Actuation
Actuator Shown In Pos. 1
T102 Models: Omit terminal 2 NOTE: Terminal bend radii and lead-in manufacturing option.
SPDT
AV
VERTICAL RIGHT ANGLE, PC THRU-HOLE
PC MOUNTING
Actuator Shown In Pos. 1
T201MH9AVBE Vertical Actuation
NOTE: Terminal bend radii and lead-in manufacturing option.
DPDT
V3
VERTICAL MOUNT, V-BRACKET
PC MOUNTING
Actuator Shown In Pos. 1
.214 (5,44)
.358 (9,08)
F
Toggle
T101MH9V3BE
T102 Models: Omit center hole.
T102 Models: Omit terminal 2
SPDT
Dimensions are shown: Inches (mm) Specifications and dimensions subject to change
F–41
www.ck-components.com
T Series Subminiature Toggle Switches
TERMINATIONS
V3
VERTICAL MOUNT, V-BRACKET
PC MOUNTING
T201MH9V3BE
DPDT
Actuator Shown In Pos. 1
CONTACT MATERIAL
OPTION CODE CONTACT MATERIAL TERMINAL PLATING GOLD 1 MATTE-TIN 6
RATINGS
B P
GOLD 1
LOW LEVEL/ DRY CIRCUIT
0.4 VA MAX. @ 20 V AC OR DC MAX.
Q G R
SILVER 4,5
SILVER 5
POWER
TX01 MODELS: 3 AMPS @ 120 V AC OR 28 V DC. ALL OTHER MODELS: 2 AMPS @ 120 V AC OR 28 V DC.
GOLD OVER SILVER 2,3
GOLD 3 MATTE-TIN 6
LOW LEVEL/DRY CIRCUIT OR POWER
TX01 MODELS: 0.4 VA MAX @ 20 V AC OR DC MAX. OR 3 AMPS @ 120 V AC OR 28 V DC. ALL OTHER MODELS: 0.4 VA MAX @ 20 V AC OR DC MAX. OR 2 AMPS @ 120 V AC OR 28 V DC.
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
1 2 3 4 5 6
CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate. END CONTACTS: Coin silver, with gold plate over nickel plate. CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate over nickel plate. END CONTACTS: Coin silver, silver plated. CENTER CONTACT & ALL TERMINALS: Copper alloy, silver plated. TERMINALS: Copper alloy, with matte-tin over nickel plate.
All models
with all options when ordered with R, G, or Q contact material.
B contact material standard with A, AV, V3 & W terminations. Q contact material standard with C & Z terminations.
SEAL
E
EPOXY SEAL
AVAILABLE HARDWARE
759D02000
SEALING BOOT
.331 (8,4)
F
Toggle
* Note: For use with S1 actuator style when combined with T, TK, and CF bushings.
1/4-40 uns-2A nut
.524 (13,3)
.658 (16,7)
Dimensions are shown: Inches (mm) Specifications and dimensions subject to change
F–42
www.ck-components.com