TDA08H0SB1R

TDA Series Ultra-miniature Surface Mount Half-pitch DIP Switches Features/Benefits • Bifurcated contact for increased electrical reliability • Process sealed for surface mount soldering and washable processing • RoHS compliant DIP H Specifications Typical Applications • Hand-held electronic devices •  Portable computer and electronic devices • Instrumentation and controls CONTACT RATING: PACKAGING: Switches supplied in rigid dispensing tubes in full tube quantities only, this may affect order quantity. Numbers of switches per tube varies with model. Tape and reel packaging quantity varies with model. 24 V DC, 25 mA (switching). Materials 50 V DC, 100 mA (steady state). CASE & COVER: PPS (UL94V-0) SWITCH FUNCTION: SPST – 1, 2, 4, 6, 8 & 10 positions. MECHANICAL AND ELECTRICAL LIFE: 1,000 cycles. ACTUATOR: LCP (UL94V-0). CONTACT RESISTANCE: 100 mΩ max. CONTACTS: Copper alloy, with gold plate over nickel plate. INSULATION RESISTANCE: 100 MΩ @ 100 V DC min. TERMINALS: Copper alloy, with gold flash over nickel plate. DIELECTRIC STRENGTH: 300 V AC min. STORAGE TEMPERATURE: -40°C to 85°C. OPERATING TEMPERATURE: -40°C to 85°C. Note: Specifications and materials listed above are for switches with standard options. OPERATING FORCE: 4,9N max. For information on specific and custom switches, consult Customer Service Center. SOLDERABILITY: Per MIL-STD-202F method 208D, or All terminals are insert molded. TAPE SEAL: Polyimide. EIA RS-186E method 9 (1 hour steam aging). Note: All switches supplied in “OFF” position. How To Order The Build-A Switch concept allows you to mix and match options to create the switch you need. Below is a complete listing of options shown in catalog. To order, simply select desired option from each category and place in the appropriate box. All switches supplied in “OFF” position. T D A Number of Positions NEW TDA01* TDA02 TDA04 TDA06 TDA08 TDA10 H 0 B 1 Flush Actuator H0 Terminations S Gull wing J* J bend Contact material B Gold Sealed 1 Packaging NONE Tubes R T/R * TDA01H0JB1R is not available, TDA01 only offered in tape & reel Dimensions are shown: mm Specifications and dimensions subject to change H–6 www.ckswitches.com TDA Series Ultra-miniature Surface Mount Half-pitch DIP Switches DIM 'A' 1,27 1,2 ON C&K 0,76 1,27 TDA08 0,8 CHAMFER H 6,35 8,89 7,62 0,45 TDA08H0SB1 0,4 TYP. 1,27 6,2 2,2 TAPE SEAL DIP 1 2 3 4 5 6 7 8 2,3 0,57 0,15 6,0 1,06 DIM ’A’ SEE CHART 8,12 DATE CODE 0,76 TYP 1,27 TYP PART NUMBER 1,2 5,37 3,77 6,97 2X 0,8 CHAMFER 0,1 DIM 'B' SEE CHART TAPE SEAL 0 ~5 6,2 0,15 TYP 2,2 TDA10H0JB1 1,27 TYP 0,45 TYP 2,35 1 TYP SEE DETAIL 6,35 TYP Tube Package ROHS PART NUMBER MARKING LABEL ON END OF TUBE REF 2,10 REF 4,40 500,0 TDA01H0SB1 TDA02H0_B1 TDA04H0_B1 TDA06H0_B1 TDA08H0_B1 TDA10H0_B1 REF 11,20 REF 3,40 NO. POS. DIM. ‘A’ DIM. ‘B QUANTITY PER TUBE 1 2,40 NA NA 2 3,67 1,27 125 4 6,21 3,81 70 6 8,75 6,35 50 8 11,29 8,89 40 10 13,83 11,43 30 Schematic ON C&K TDA06 EMBOSSED CARRIER 1 2 3 4 5 6 REEL DIAMETER 330mm SPST REF 2,0 MARKING LABEL Tape & Reel Package DIM 'W' SEE CHART TDA01H0SB1R* TDA02H0_B1R TDA04H0_B1R TDA06H0_B1R TDA08H0_B1R TDA10H0_B1R 12,0 DIRECTION OF FEED ROHS PART NUMBER DIRECTION OF FEED 3,0 NO. QUANTITY POS. DIM. ‘W’ PER REEL 1 16,0 2500 2 16,0 2000 4 16,0 2000 6 16,0 2000 8 24,0 2000 10 24,0 2000 * see next page for TDA01 tape & reel drawing Dimensions are shown: mm Specifications and dimensions subject to change H–7 www.ckswitches.com TDA Series Ultra-miniature Surface Mount Half-pitch DIP Switches 1.75 0.10 4.00 0.10 DIP H 8.00 0.10 1.5 +0.10 -0.00 TDA01H0SB1R 0.40 0.05 7.50 0.10 16.0 0.30 6.55 8.60 0.4 +0.2 O SEE DTEAIL A 1 0.1 R0.3 MAX 2.0 0.2 TYP 2.65 2.90 6.55 0.1 8.60 0.1 14.0 SEE DETAIL "B' 2 0.5 2.9 0.1 13 0.5 21 0.8 330 DETAIL "B" Dimensions are shown: Inch (mm) Specifications and dimensions subject to change H–8 www.ckswitches.com