TDP06H1SBD1

TDP Series Ultra-miniature Surface Mount Half-pitch Side-Actuated DIP Switches Features/Benefits •  World’s first ultra-miniature SMT half-pitch side-actuated DIP •  Side actuation allows visual indication of H electronic devices • Instrumentation and controls Specifications DIP on/off position in horizontal applications •  Process sealed for surface mount soldering and washable processing •  RoHS compliant • Lead free Typical Applications •  Hand-held electronic devices •  Portable computer and Materials SWITCH FUNCTION: SPST — 2, 4, 6, 8, 10 positions. CASE & COVER: glass filled PPS (UL94V-0). CONTACT RATING: ACTUATOR: PA6T (UL94V-0). 24 V DC, 25 mA (switching). CONTACTS: Copper alloy with gold plate over nickel plate. 50 V DC, 100 mA (steady state). TERMINALS: Copper alloy, with gold over nickel plate. MECHANICAL AND ELECTRICAL LIFE: 1,000 cycles. CONTACT RESISTANCE: 100 mΩ max. TAPE SEAL: Polyimide. INSULATION RESISTANCE: 100 MΩ @ 100 V DC min. All terminals are insert molded. Note: Specifications and materials listed above are for switches with standard options. DIELECTRIC STRENGTH: 300 V AC min. For information on specific and custom switches, consult Customer Service Center. STORAGE TEMPERATURE: –40°C to 85°C. OPERATING TEMPERATURE: –40°C to 85°C. OPERATING FORCE: 4,9N max. SOLDERABILITY: Per MIL-STD-202F method 208D, or EIA RS-186E method 9 (1 hour steam aging). PACKAGING: Switches supplied in rigid dispensing tubes in full tube quantities only, this may affect order quantity. Tape and reel packaging also available. How To Order The Build-A Switch concept allows you to mix and match options to create the switch you need. Below is a complete listing of options shown in catalog. To order, simply select desired option from each category and place in the appropriate box. All switches supplied in “OFF” position. T D P S B Designation TDP Number of Positions 02 Actuator 04 H0 Flush Actuator 06 H1 Extended Actuator 08 Terminations 10 S Gull wing 1 Packaging (None) Tubes R Tape and Reel Terminal Seal 1 Terminals are sealed Tape Seal (None) with tape D No tape Contact Material B Gold Note: Tape seal is not available with H1 Extended Actuators. Dimensions are shown: Inch (mm) Specifications and dimensions subject to change H–3 www.ckswitches.com TDP Series Ultra-miniature Surface Mount Half-pitch Side-Actuated DIP Switches Flush Actuator-No Top Tape, Surface Mount Terminals H 0.030 (0,76) DIM 'A' DIP 0.023 (0,6) 0.050 TYP. (1,27) 0.047 (1,2) 2X 0.039 (1,0) CHAMFER C&K 0.012/0.004 (0,3/0,1) O N 1 2 3 4 5 6 7 TDP08 5A 0.300 (7,62) 8 1 2 4 3 5 6 7 0.050 (1,27) 0.250 (6,35) 8 0.350 (8,89) DATE CODE 0.161 (4,1) PART NUMBER 0.236 (6,0) 0.006 (0,15) 10 0 0.228 (5,8) 0.022 (0,57) 0.042 (1,06) DIM 'B' 0.018 (0,45) NO. DIM POS. ‘A’ DIM “B” QUANTITY PER TUBE TDP02H0SBD1 2 0.144 (3,67) 0.050 (1,27) 125 TDP04H0SBD1 4 0.244 (6,21) 0.150 (3,81) 70 TDP06H0SBD1 6 0.344 (8,74) 0.250 (6,35) 50 TDP08H0SBD1 8 0.444 (11,29) 0.350 (8,89) 40 TDP10H0SBD1 10 0.544 (13,82) 0.450 (11,43) 30 Schematic 0.320 (8,12) SPST Flush Actuator-with Top Tape, Surface Mount Terminals DIM 'A' 0.023 (0,6) TAPE SEAL 0.047 (1,2) 2X 0.039 (1,0) CHAMFER C&K 0.012/0.004 (0,3/0,1) O N 1 2 3 4 5 6 7 0.030 (0,76) 0.050 TYP. (1,27) TDP08 5A 0.300 (7,62) 8 1 2 3 5 4 6 7 8 0.018 (0,45) PART NUMBER 0.239 (6,06) 0.236 (6,0) 0.006 (0,15) 10 0 0.022 (0,57) 0.042 (1,06) 0.228 (5,8) 0.320 (8,12) 0.250 (6,35) 0.350 (8,89) DATE CODE 0.164 MAX. (4,16) 0.161 (4,1) TAPE SEAL 0.050 (1,27) DIM 'B' NO. DIM POS. ‘A’ DIM “B” QUANTITY PER TUBE TDP02H0SB1 2 0.144 (3,67) 0.050 (1,27) 125 TDP04H0SB1 4 0.244 (6,21) 0.150 (3,81) 70 TDP06H0SB1 6 0.344 (8,74) 0.250 (6,35) 50 TDP08H0SB1 8 0.444 (11,29) 0.350 (8,89) 40 TDP10H0SB1 10 0.544 (13,82) 0.450 (11,43) 30 Schematic SPST Dimensions are shown: Inch (mm) Specifications and dimensions subject to change H–4 www.ckswitches.com TDP Series Ultra-miniature Surface Mount Half-pitch Side-Actuated DIP Switches Extended Actuator-No Top Tape, Surface Mount Terminals 0.023 (0,6) O N 1 2X 0.039 (1,0) CHAMFER C&K 2 3 5 4 6 7 H 0.050 TYP. (1,27) 0.047 (1,2) TDP08 5A 8 1 2 4 3 5 6 7 0.300 (7,62) DATE CODE 0.050 (1,27) 0.250 (6,35) DIP 0.012/0.004 (0,3/0,1) 0.030 (0,76) DIM 'A' 0.350 (8,89) 8 0.161 (4,1) DIM 'B' 0.018 (0,45) PART NUMBER NO. DIM POS. ‘A’ DIM “B” QUANTITY PER TUBE 0.236 (6,0) 0.030 (0,75) TDP02H1SBD1 2 0.144 (3,67) 0.050 (1,27) 125 TDP04H1SBD1 4 0.244 (6,21) 0.150 (3,81) 70 TDP06H1SBD1 6 0.344 (8,74) 0.250 (6,35) 50 TDP08H1SBD1 8 0.444 (11,29) 0.350 (8,89) 40 TDP10H1SBD1 10 0.544 (13,82) 0.450 (11,43) 30 0.006 (0,15) 100 0.228 (5,8) 0.022 (0,57) Schematic 0.042 (1,06) 0.320 (8,12) SPST Tube Packaging 0.055 (1,4) 0.248 (6,3) 0.130 (3,3) 19.690±.039 (500,0±1,0) R 0.020 (R 0,5) 0.130 (3,3) 0.039 (1,0) 0.201 (5,1) QTY MODEL NUMBER IN TUBE 0.020 (0,5) 0.134 (3,4) 0.440 (11,2) R 0.043 (R 1,1) Note: Switch shown has H1 extended actuator. Tape and Reel Packaging MARKING LABEL 0.157 (4,00) EMBOSSED CARRIER 0.472 (12,00) TDP02 125 TDP04 70 TDP06 50 TDP08 40 TDP10 30 0.079 (2,00) PIN #1 A Ø0.059 (1,50Ø) DIM PART NUMBER DIM. ‘W’ DIM “P” TDP02 0.630 (16,0) 0.175 (4,45) 1,000 TDP04 0.630 (16,0) 0.276 (7,0) 1,000 TDP06 0.630 (16,0) 0.376 (9,55) 1,000 TDP08 0.945 (24,0) 0.476 (12,1) 1,000 TDP10 0.945 (24,0) 0.576 (14,65) 1,000 B PER REEL 0.350 (8,9) A C&K TDP08 5A 1 2 3 4 5 6 7 8 DIRECTION OF FEED 0.069 (1,75) 0.191 (4,86) REF 0.012 (0,30) 0.453 (11,5) DIM. 'W' SEE CHART B DIM. “P” SEE CHART 0.350 (8,9) SECTION B-B NOTE: PART NUMBER SHOWN:TDP08H1SBD1R FEED DIRECTION SECTION A-A Dimensions are shown: Inch (mm) Specifications and dimensions subject to change H–5 www.ckswitches.com