Y201132B803NB

Y Series 4, 5 & 6 Tumbler Switchlocks Features/Benefits • Anti-static switch—exceeds 20 KV DCstatic resistance • Momentary models available • Wire leads and harnesses available Typical Applications • Point-of-sale terminals • Cash registers • Computers Patent No. 4,639,562 Models Available Specifications Materials CONTACT RATING: Q contact material: 4 AMPS @ 125 V AC or 28 V DC; 2 AMPS @ 250 V AC (UL/CSA). See page L-9 for additional ratings. ELECTRICAL LIFE: 10,000 make-and-break cycles at full load. CONTACT RESISTANCE: Below 10 m Ω typ. initial @ 2-4 V DC, 100 mA, for both silver and gold plated contacts. INSULATION RESISTANCE: 109 Ω min. DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level. INDEXING: 45º or 90º, 2-4 positions (4&5 tumbler switchlocks). 45º, 3 positions; or 90º, 2 positions (6 tumbler tubular switchlocks). Other functions available, consult Customer Service Center. STATIC RESISTANCE: Anti-static models exceed 20 KV DC static resistance @ sea level, lock body to terminals. MOUNTING TORQUE: 10 in./lbs.; 14 in./lbs max. OPERATING TEMPERATURE: -30°C to 85°C. LOCK: Zinc alloy with stainless steel facing, std. (4 & 5 tumbler lock and 6 tumbler tubular lock). KEYS: Two nickel plated brass keys, with code number, std. (4 and 5 tumbler lock). Two die cast chrome plated zinc alloy keys,std. (6 tumbler lock). SWITCH HOUSING: Glass filled polyester (UL 94V-0). CONTACTS AND TERMINALS: Q contact material: Copper, silver plated. See page L-9 for additional contact materials. MOUNTING NUT: Zinc alloy. MOUNTING CLIP: Steel, zinc plated. DRESS NUT: Brass, nickel plated. TERMINAL SEAL: Epoxy. NOTE: Any models supplied with Q, B or G contact material are RoHS compliant. NOTE: Specifications and materials listed above are for switchlocks with standard options. For information on specific and custom switchlocks, consult Customer Service Center. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages L–4 through L–10. For additional options not shown in catalog, consult Customer Service Center. L Contact Material Q Silver B Gold G Gold over silver Seal NONE No seal E Epoxy seal Mounting/Lock Style N With nut D With clip L With removable dress nut and latch pawl R With removable dress nut Dimensions are shown: Inch (mm) Specifications and dimensions subject to change L–3 www.ckswitches.com Switchlock Switch and Lock Function Y10013 SP, 45°, keypull pos. 1 Keying Y1011U SP, 90°, keypull pos. 1 & 2 2 Two nickel plated brass keys (4 & 5 tumbler) or two die cast zinc alloy keys with Y1001U SP, 45°, keypull pos. 1 & 3 chrome plating (6 tumbler) Y2001U DP, 45°, keypull pos. 1 & 3 6 Two nickel plated brass keys with code on lock face Y10082 SP, 45°, keypull pos. 1 Y20082 DP, 45°, keypull pos. 1 Lock Type Y100AA SP, 45°, keypull pos. 1, 2 & 3 A 4 Tumbler lock (YXO8 models) Y200AA DP, 45°, keypull pos. 1, 2 & 3 C 4 Tumbler lock with detent Y100AB SP, 45°, keypull pos. 1, 2, 3 & 4 V 6 Tumbler tubular lock Y200AB DP, 45°, keypull pos. 1, 2, 3 & 4 B 5 Tumbler lock Y10113 SP, 90°, keypull pos. 1 R 4 Tumbler lock with detent and anti-Static switch Y20113 DP, 90°, keypull pos. 1 W 6 Tumbler tubular lock with anti-Static switch Y1011C SP, 90°, keypull pos.2 Y2011C DP, 90°, keypull pos. 2 Lock Finish Y2011U DP, 90°, keypull pos. 1 & 2 2 Stainless steel facing Y14173 SP, 90°, keypull pos. 1 8 Gloss black facing Terminations Y1417U SP, 90°, keypull pos. 1,2 & 3 F Polished nickel facing 03 Solder lug with hole Y10812 SP, 45°, mom., keypull pos. 1 01 Solder lug with notch Y20812 DP, 45°, mom., keypull pos. 1 02 PC Thru-hole Y19073 SP w/common, 90°, keypull pos. 1 07 Solder lug with hole Y1907U SP w/common, 90°, keypull pos. 1, 2 & 3 (Y19OXX models only) Y1900S SP w/common, 90°, keypull pos. 1, 2, 3 & 4 WC Wire lead Y Series 4, 5 & 6 Tumbler Switchlocks SWITCH AND LOCK FUNCTION SINGLE & DOUBLE POLE SWITCHES CONNECTED TERMINALS NO. TUMBLERS NO. POLES MODEL NO. POS. 1 POS. 2 POS. 3 KEY PULL POSITIONS POS. 4 LOCK CONFIGURATION INDEXING POS. 1 2 4, 5 & 6 SP Y10013 8-1 1-2 2-3 4, 5 & 6 SP DP Y1001U Y2001U 8-1 8-1, 4-5 1-2 1-2, 5-6 2-3 2-3, 6-7 Positions 1 & 3 4&5 SP DP Y10082 Y20082 8-1 8-1, 4-5 1-2 1-2, 5-6 7-8 7-8, 3-4 Position 1 4 SP DP Y100AA Y200AA 8-1 8-1, 4-5 1-2 1-2, 5-6 7-8 7-8, 3-4 Positions 1, 2 & 3 4 SP DP Y100AB Y200AB 8-1 8-1, 4-5 1-2 1-2, 5-6 2-3 2-3, 6-7 Position 1 3 POS. 1 2 3 3 POS. 1 2 45º 3 POS. 1 2 POS. 1 3-4 3-4, 7-8 2 Positions 1, 2, 3 & 4 3 4 POS. 1 4, 5 & 6 SP DP Y10113 Y20113 8-1 8-1, 4-5 1-3 1-3, 5-7 Position 1 4&5 SP DP Y1011C Y2011C 8-1 8-1, 4-5 1-3 1-3, 5-7 Position 2 4, 5 & 6 SP DP Y1011U Y2011U 8-1 8-1, 4-5 1-3 1-3, 5-7 Positions 1 & 2 4 SP Y14173 7-1 1-3 6-7 Position 1 4 SP Y1417U 7-1 1-3 6-7 Positions 1, 2 & 3 2 POS. 1 2 POS. 1 90º 2 POS. 1 2 3 POS. 1 3 2 SINGLE & DOUBLE POLE MOMENTARY SWITCHES Switchlock L CONNECTED TERMINALS NO. TUMBLERS 4 NO. POLES SP DP MODEL NO. Y10812 Y20812 POS. 1 8-1 8-1, 4-5 LEGEND POS. 2 POS. 3 KEY PULL POSITIONS POS. 4 1-2 1-2, 5-6 LOCK CONFIGURATION POS. 1 2 Position 1 INDEXING 45º Mom. TERMINAL NUMBERS Terminal numbers molded on bottom of housing. = Momentary Positions (45º) All models = Detent Positions (45º or 90º ) with all options when ordered with ‘G’ or ‘Q’ contact material. = Key pull possible in these positions. = Stop Positions Dimensions are shown: Inch (mm) Specifications and dimensions subject to change L–4 www.ckswitches.com Y Series 4, 5 & 6 Tumbler Switchlocks SWITCH AND LOCK FUNCTION SINGLE POLE SWITCHES WITH COMMON CONNECTED TERMINALS NO. TUMBLERS NO. POLES MODEL NO. POS. 1 POS. 2 POS. 3 KEY PULL POSITIONS POS. 4 LOCK CONFIGURATION INDEXING POS. 1 Y19073 Position 1 C-1 C-2 POS. 1 Y1907U 4 2 3 C-4 Positions 1, 2 & 3 SP 3 2 90º POS. 1 Y1900S C-1 C-2 C-3 C-4 Positions 1, 2, 3 & 4 2 4 3 LEGEND TERMINAL NUMBERS = Detent Positions (45º or 90º) Terminal numbers marked on insulator. All models = Key pull possible in these positions. with all options when ordered with ‘G’ or ‘Q’ contact material. = Stop Positions NOTE: Epoxy seal not available. Removable dress nut not available with any Y190XX models. 4 & 5 Tumbler L SLOTS IN THIS LOCATION FOR MOUNTING STYLE 'D' CLIP Switchlock Part number shown: Y100132C203NQ 6 Tumbler SLOTS IN THIS LOCATION FOR MOUNTING STYLE 'D' CLIP Part number shown: Y1011U2V203NQ Dimensions are shown: Inch (mm) Specifications and dimensions subject to change L–5 www.ckswitches.com Y Series 4, 5 & 6 Tumbler Switchlocks SWITCH AND LOCK FUNCTION AVAILABLE OPTION COMBINATIONS LOCK TYPES MODELS A YX0013 YX001U YX0082 B C R • • • • • • • • • • • • • • • • • • • • YX00AX • • • YX0113 YX011C YX01IU Y141XX YX0812 • Y190XX V W 01 02 03 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • KEYING OPTION CODE KEYING OPTIONS MOUNTING/LOCK STYLES TERMINATIONS 07 WC D • • • • • • • • • • • • • • • • • • • • • L • • N R • • • • • • • • • • • • • • • • • KEYING CODE NO. ON KEY CODE NO. ON LOCK 2 2 NICKEL PLATED BRASS KEYS (4 & 5 TUMBLER) or 2 DIE CAST CHROME PLATED ZINC ALLOY KEYS (6 TUMBLER) YES NO 6 2 NICKEL PLATED BRASS KEYS, 4 & 5 TUMBLER ONLY YES YES NOTE: All orders keyed alike, standard. For more than one key code, master keying, replacement keys, or other special features, consult Customer Service Center. Switchlock L NOTE: Keys are available separately, see page L-10. Key head shape subject to change without notice. LOCK TYPE C 4 TUMBLER LOCK WITH DETENT B 5 TUMBLER LOCK A 4 TUMBLER LOCK (MOMENTARY MODELS ONLY) V 6 TUMBLER TUBULAR LOCK . Dimensions are shown: Inch (mm) Specifications and dimensions subject to change L–6 www.ckswitches.com Y Series 4, 5 & 6 Tumbler Switchlocks LOCK TYPE SHORT ANTI-STATIC LOCK TYPES R  4 TUMBLER LOCK WITH DETENT AND W  6 TUMBLER TUBULAR LOCK WITH SHORT ANTI-STATIC SWITCH. ANTI-STATIC SWITCH Available with Lock Finish '2' only. NOTE: For available option combinations, see page L-9. U.S. Pat. No. 4,639,562 Exceeds 20 KV DC static resistance @ sea level, lock body to terminals. LOCK FINISH 2  STAINLESS STEEL 8  GLOSS BLACK F  POLISHED NICKEL Available with Lock Types ‘V’ & ‘W’ only. NOTE: For available option combinations, see page L-9. TERMINATIONS 03  SOLDER LUG WITH HOLE 01  SOLDER LUG WITH NOTCH 02  PC THRU-HOLE WC  WIRE LEAD L All Models Except Y190 02  PC THRU-HOLE 07  SOLDER LUG WITH HOLE WC  WIRE LEAD PC MOUNTING Black wire standard. other colors and lengths available, consult Customer Service Center. UL style 1015. Y190 Model Only Dimensions are shown: Inch (mm) Specifications and dimensions subject to change L–7 www.ckswitches.com Switchlock Black wire standard. other colors and lengths available, consult Customer Service Center. UL style 1015. Y Series 4, 5 & 6 Tumbler Switchlocks MOUNTING/LOCK STYLE N  WITH NUT D  WITH CLIP .136 DIA. (3,45) .105 (2,67) 3/4±24 UNS PANEL MOUNTING .470 (11,94) .225 (5,72) .125 thk. (3,18) .688 (17,46) .468 (11,88) Nut part number: 937C00000 .965 (24,51) S GRAIN DIRECTION BURR SIDE UP No 563 65 PaT 40 1.010 (25,65) 1.000 (25,40) .500 (12,70) U .875 (22,23) 1.047 (26,59) MOUNTING STYLE OPTION CODE .034 (0,86) .100 (2,54) .655 (16,62) PANEL THICKNESS N WITH NUT .085-.105 (2,16-2,67) D WITH CLIP .085-.105 (2,16-2,67) Clip part number: 906B00000 R  REMOVABLE DRESS NUT PANEL MOUNTING LOCK DIMENSIONS DIMENSIONS TYPICAL INSTALLATION Install hex nut with enough clearance to allow for dress nut and panel. Place switch through cutout in rear of panel. Install and tighten dress nut by hand, then tighten hex nut. Always tighten assembly with back of panel hex nut to avoid damaging front of panel. LOCK TYPES ‘A’ A, N .270 (6,68) C, R .360 (9,14) Switchlock L NOTE: Removable dress nut not available with Y1900A or Y100AA model options. L  REMOVABLE DRESS NUT WITH LATCH PAWL PANEL MOUNTING Latch pawl shown in pos. 1. Dimensions are shown: Inch (mm) Specifications and dimensions subject to change L–8 www.ckswitches.com Y Series 4, 5 & 6 Tumbler Switchlocks MOUNTING/LOCK STYLE Mounting Information (All Models) PANEL THICKNESS MOUNTING STYLES A, B LOCK TYPES D C, R LOCK TYPES V, W LOCK TYPES .065-.085 (1, 65-2, 16) N .105 (2, 67) max. L .085-.105 (2, 16-2, 67) .195 (4, 95) max. .215 (5, 46) max. .215 (5, 46) max. R .125 (3, 18) max. – .215 (5, 46) max. – AVAILABLE OPTION COMBINATIONS LOCK FINISHES MOUNTING STYLES D N R L 2 8 • • • • • • LOCK TYPES F A B • • • • • • • • • • • • • • • • • • • • • C R V W CONTACT MATERIAL OPTION CODE RoHS RoHS COMPLIANT* COMPATIBLE * CONTACT AND TERMINAL MATERIAL RATING 4 AMPS @ 125 V AC or 28 V DC; 2 AMPS @ 250 AC V AC (UL/CSA). Q YES YES SILVER 2 B YES YES GOLD 1 LOW LEVEL/DRY CIRCUIT 0.4 VA MAX. @ 20 V AC or DC MAX GOLD SILVER 3 LOW LEVEL/DRY CIRCUIT OR POWER 0.4 VA MAX. @ 20 V AC or DC MAX. or 4 AMPS @ 125 V AC or 28 V DC; 2 AMPS @ 250 V AC (UL/CSA) G YES YES POWER * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. 1 2 3 All models CONTACTS & TERMINALS: Copper, with gold plate over nickel plate. CONTACTS & TERMINALS: Copper, silver plated (std. with all termination options). CONTACTS & TERMINALS: Copper, with gold plate over silver plate. with all options when ordered with ‘G’ or ‘Q’ contact material. L Switchlock SEAL E  EPOXY SEAL NONE  NO SEAL EPOXY .075 MAX. (1,91) Dimensions are shown: Inch (mm) Specifications and dimensions subject to change L–9 www.ckswitches.com Y Series 4, 5 & 6 Tumbler Switchlocks AVAILABLE HARDWARE Key Code: A126 Key Code: D001 4 TUMBLER 5 TUMBLER PART NO. (ONE KEY) PART NO. (ONE KEY) Key Code: AAAA 115140126 115441001 PART NO. (ONE KEY) Material: Brass Finish: Nickel plate Material: Brass Finish: Nickel plate 363C1AAAA Material: Zinc alloy Finish: Chrome plate Switchlock L Dimensions are shown: Inch (mm) Specifications and dimensions subject to change L–10 www.ckswitches.com