CLE233

CLE230,CLE231,CLE232,CLE233 High Power Aluminum Gallium Arsenide IREDs 0.210 (5.33) 0.190 (4.83) 1.00 (25.4) min. ® Clairex February, 2001  Technologies, Inc. 0.100 (2.54) dia. 0.215 (5.46) 0.205 (5.21) ANODE 0.158 (4.01) 0.136 (3.45) 0.190 (4.83) 0.176 (4.47) CATHODE 0.025 (0.64) max. 0.050 (1.27) 0.030 (0.76) 0.019 (0.48) 0.016 (0.41) 0.147 (3.73) 0.137 (3.48) ALL DIMENSIONS ARE IN INCHES (MILLIMETERS) Case 2 features • • • • narrow emission angle TO-46 hermetically sealed package excellent heat dissipation high power output absolute maximum ratings (TA = 25°C unless otherwise stated) description The CLE230 series are AlGaAs infrared emitting diodes mounted in TO-46 hermetic packages. The narrow emission angle provides high on-axis intensity. The series are spectrally and mechanically matched to the CLT130 phototransistor series. For additional information, call Clairex. storage temperature ...................................................................... -55°C to +150°C operating temperature ................................................................... -55°C to +125°C lead soldering temperature(1) ......................................................................... 240°C maximum continuous current(2) ..................................................................... 100mA peak forward current (10µs pulse width, 100pps) .............................................. 10A maximum power dissipation(3)...................................................................... 170mW reverse voltage .................................................................................................... 3V 1. 2. 3. 0.06” (1.5mm) from the header for 5 seconds maximum. Maximum temperature can be 260°C if wave soldering. Derate linearly 1.0mA/°C from 25°C free air temperature to TA = +125°C. Derate linearly 1.7mW/°C from 25°C free air temperature to TA = +125°C. notes: electrical characteristics (TA = 25°C unless otherwise noted) symbol Ee parameter Irradiance (1) min C LE230 CLE231 CLE232 CLE233 1.0 1.5 2.6 3.5 - typ 880 80 40 700 700 max 1.8 10 - units mW/cm 2 test conditions IF = 100ma VF IR λP BW ΘHP tr tf Forward voltage Reverse current Peak emission wavelength Spectral bandwidth at half power points Emission angle at half power points Output rise time Output fall time V µA nm nm deg. ns ns IF = 100ma VR = 3.0V IF = 100ma IF = 20ma IF = 20ma IF = 100ma IF = 100ma note: 1. Measured into a 0.25” aperture, 1.20” from device lens. Clairex reserves the right to make changes at any time to improve design and to provide the best possible product. Clairex Technologies, Inc. Phone: 972-422-4676 1845 Summit Ave., #404 Fax: 972-423-8628 Plano, Texas 75074-8148 www.clairex.com