CLE300F

CLE300F Aluminum Gallium Arsenide IRED Flat Lead PLCC Package ® Clairex May, 2003  Technologies, Inc. ALL DIMENSIONS ARE IN INCHES (MILLIMETERS) ALL DIMENSIONS ARE IN INCHES (MILLIMETERS) features • Flat lead PLCC package • ±50° emission angle • 850 nm peak wavelength • RoHS compliant description The CLE300F is an 850nm high output infrared emitting diode chip featuring current AlGaAs technology. notes: It is mounted in a compact, 1. 0.06” (1.5mm) from case for 5 seconds maximum. embedded leadframe package with 2. Derate linearly 0.40mA/°C from 25°C free air temperature to TA = +125°C. flying lead configuration and 3. Derate linearly 0.64mW/°C from 25°C free air temperature to TA = +125°C. overcoated with clear epoxy to provide a wide emission pattern. Contact Clairex for alternative wavelength emitter chips, different lenses and lead configurations. electrical characteristics (TA = 25°C unless otherwise noted) symbol PO VF IR λp BW θHP tr tf notes: absolute maximum ratings (TA = 25°C unless otherwise stated) storage temperature ...................................................................... -40°C to +125°C operating temperature ................................................................... -40°C to +125°C lead soldering temperature(1) ......................................................................... 260°C (2) continuous forward current .......................................................................... 50mA peak forward current (1.0ms pulse width, 10% duty cycle).................................. 1A reverse voltage .................................................................................................... 5V continuous power dissipation(3) ...................................................................... 80mW parameter Total power output Forward voltage Reverse current Peak emission wavelength Spectral bandwidth at half power points Emission angle at half power points Radiation rise time Radiation fall time (4) (4) min 3.0 - typ 4.0 1.4 850 60 100 11 7.0 max 1.6 10 - units mW V µA nm nm deg. ns ns test conditions IF = 20mA IF = 20mA VR = 5V IF = 20mA IF = 20mA IF = 20mA IF(PK) = 20mA IF(PK) = 20mA 4. f = 100kHz, D.C. = 50%. Pulse generator tr and tf