CLE332W

CLE332 Series 850nm Point Source Emitters ® Clairex February, 2005  Technologies, Inc. 0.165 (4.19) 0.145 (3.68) 0.156 (3.96) 0.136 (3.45) 1.00 (25.4) min. 0.100 (2.54) dia. 0.215 (5.46) 0.205 (5.21) ANODE 0.190 (4.83) 0.176 (4.47) CATHODE 0.025 (0.64) max. 0.050 (1.27) nom 0.019 (0.48) 0.016 (0.41) 0.147 (3.73) 0.137 (3.48) CLE332 0.130 (3.30) max 1.00 (25.4) min. 0.050 (1.27) max 0.213 (5.41) 0.207 (5.26) 0.100 (2.54) pin circle ANODE 0.169 (4.29) 0.163 (4.14) CATHODE 0.010 (0.25) nom 0.019 (0.48) 0.016 (0.41) 0.147 (3.73) 0.137 (3.48) C 6 CLE332E 0.156 (3.96) 0.136 (3.45) 0.165 (4.19) 0.145 (3.68) 1.00 (25.4) min. 0.100 (2.54) dia. 0.215 (5.46) 0.205 (5.21) ANODE 0.190 (4.83) 0.176 (4.47) CATHODE 0.025 (0.64) max. 0.010 (0.25) max 0.019 (0.48) 0.016 (0.41) 0.147 (3.73) 0.137 (3.48) ALL DIMENSIONS ARE IN INCHES (MILLIMETERS) CLE332W Clairex reserves the right to make changes at any time to improve design and to provide the best possible product. Revised 3/15/06 Clairex Technologies, Inc. Phone: 972-265-4900 1301 East Plano Parkway Fax: 972-265-4949 Plano, Texas 75074-8524 www.clairex.com CLE332 Series 850nm Point Source Emitters features • TO-46 header with three lens options • cathode connected to case • high power output • different package styles provide flexible design options description The CLE332 series of products feature AlGaAs, 850nm, point source chips. Three different lens options are offered which satisfy the majority of application requirements. Contact Clairex for other package options. ® Clairex  Technologies, Inc. absolute maximum ratings (TA = 25°C unless otherwise stated) storage temperature CLE332 and CLE332W..............................................................-65°C to +150°C CLE332E....................................................................................-40°C to +125°C operating temperature CLE332 and CLE332W ..............................................................-65°C to +125°C CLE332E....................................................................................-40°C to +100°C lead soldering temperature(1)......................................................................... 260°C (2) continuous forward current ..........................................................................50mA peak forward current (1.0ms pulse width, 10% duty cycle)..................................1A reverse voltage....................................................................................................5V continuous power dissipation(3) ...................................................................200mW notes: 1. 0.06” (1.5mm) from the header for 5 seconds maximum 2. Derate linearly 0.40mA/°C from 25°C free air temperature to TA = +125°C. 3. Derate linearly 1.60mW/°C from 25°C free air temperature to TA = +125°C. 4. These devices are sensitive to transients. Use series resistors or power supply load resistors when applying power. electrical characteristics (TA = 25°C unless otherwise noted) symbol parameter CLE332 Series VF IR λp BW tr, tf Forward voltage Reverse current Peak wavelength Spectral bandwidth Output rise and fall time Total output power Irradiance Emission angle at half power points Total output power Emission angle at half power points Total output power Emission angle at half power points min 840 1.5 225 3.5 1.5 - typ 1.8 850 40 10 2.0 15 4.5 135 2.0 80 max 2.0 10 860 - units V µA nm nm ns mW µW/cm2 deg. mW deg. mW deg. test conditions IF = 50mA VR = 5V IF = 50mA IF = 50mA IF = 50mA, 10% - 90% 5mA prebias IF = 50mA IF = 50mA IF = 50mA IF = 50mA IF = 50mA IF = 50mA IF = 50mA CLE332 PO Ee θHP CLE332E PO θHP CLE332W PO θHP Clairex reserves the right to make changes at any time to improve design and to provide the best possible product. Clairex Technologies, Inc. Phone: 972-265-4900 1301 East Plano Parkway Fax: 972-265-4949 Plano, Texas 75074-8524 www.clairex.com