CLE436W

CLE436W Preliminary High Power Red LED – Minimal Infrared Content Flat Window Can, Hermetically Sealed 0.156 (3.96) 0.136 (3.45) 0.165 (4.19) 0.145 (3.68) 1.00 (25.4) min. ® Clairex March, 2006  Technologies, Inc. 0.100 (2.54) dia. 0.215 (5.46) 0.205 (5.21) ANODE 0.190 (4.83) 0.176 (4.47) CATHODE 0.025 (0.64) max. 0.019 (0.48) 0.010 (0.25) max 0.016 (0.41) 0.147 (3.73) 0.137 (3.48) ALL DIMENSIONS ARE IN INCHES (MILLIMETERS) features • Flat lens TO-46 Package • Minimal infrared content • ± 35° emission angle • High luminous flux • RoHS compliant description The CLE436W is an advanced, highefficiency, high speed, GaAlAs red light emitting diode designed for minimal light in the infrared region. Radiated emissions above 750nm are less than 0.1% of emissions at 660nm. For additional information, call Clairex. absolute maximum ratings (TA = 25°C unless otherwise stated) storage temperature ...................................................................... -65°C to +150°C operating temperature ................................................................... -65°C to +125°C lead soldering temperature(1) ......................................................................... 260°C (2) continuous forward current .......................................................................... 60mA reverse voltage ................................................................................................. 5.0V peak forward current (1.0ms pulse width, 10% duty cycle)............................... 1.0A continuous power dissipation(3) .................................................................... 200mW notes: 1. 0.06” (1.5mm) from case for 5 seconds maximum. 2. Derate linearly 0.48mA/°C from 25°C free air temperature to TA = +125°C. 3. Derate linearly 1.60mW/°C from 25°C free air temperature to TA = +125°C. Case 3 electrical characteristics (TA = 25°C unless otherwise noted) symbol ΦV VF IR θHP λp parameter Luminous flux Forward voltage Reverse current Emission angle at half power points Peak Wavelength min 650 typ 72 70 660 max 2.2 10 670 units mlm V µA deg. nm test conditions IF = 20mA IF = 20mA VR = 5.0V IF = 20mA IF = 20mA Clairex reserves the right to make changes at any time to improve design and to provide the best possible product. Revised 3/20/06 Clairex Technologies, Inc. Phone: 972-265-4900 1301 East Plano Parkway Fax: 972-265-4949 Plano, Texas 75074-8524 www.clairex.com