CLE501

CLE501 390nm UV LED Dome Lens, TO-46 Aluminum Package 0.165 (4.19) 0.145 (3.68) 0.156 (3.96) 0.136 (3.45) 1.00 (25.4) min. ® Clairex April, 2006  Technologies, Inc. 0.100 (2.54) dia. 0.215 (5.46) 0.205 (5.21) CATHODE 0.190 (4.83) 0.176 (4.47) (connected to case) ANODE 0.025 (0.64) max. 0.050 (1.27) nom 0.019 (0.48) 0.016 (0.41) 0.147 (3.73) 0.137 (3.48) ALL DIMENSIONS ARE IN INCHES (MILLIMETERS) Anode lead is longer than cathode lead. Case 7 features • 390nm wavelength • ±35° emission angle • Cathode connected to case • RoHS compliant applications • identifying petroleum deposits in down-hole drilling operations • currency validation • security • water purification • UV epoxy curing description The CLE501 contains a single 390nm LED die mounted on a TO-46 aluminum header. Custom variations are available which can contain from one to more than nine die. Special lenses and multiple lead packages are also available. Call Clairex for more information. absolute maximum ratings (TA = 25°C unless otherwise stated) storage temperature ...................................................................... -40°C to +100°C operating temperature ................................................................... -40°C to +100°C lead soldering temperature(1) ......................................................................... 260°C (2) continuous forward current .......................................................................... 20mA peak forward current (1.0ms pulse width, 10% duty cycle)............................... 0.5A reverse voltage ................................................................................................. 5.0V continuous power dissipation(3) .................................................................... 200mW notes: 1. 0.06” (1.5mm) from case for 5 seconds maximum 2. Derate linearly 0.21mA/°C from 25°C free air temperature to TA = +100°C. 3. Derate linearly 3.73mW/°C from 25°C free air temperature to TA = +100°C. Exercise caution when applying power to this unit. It emits high amounts of UV radiation. Do not look directly into the lens without proper eye protection. electrical characteristics (TA = 25°C unless otherwise noted) symbol PO VF IR λp θHP parameter Total power output (4) Forward voltage Reverse current Peak emission wavelength Emission angle at half power points min 1.5 375 typ 3.0 390 70 max 3.9 10 405 units mW V µA nm deg. test conditions IF = 20mA IF = 20mA VR = 5.0V IF = 20mA IF = 20mA note: 4. Power output is measured in an integrating sphere. Clairex reserves the right to make changes at any time to improve design and to provide the best possible product. Clairex Technologies, Inc. Phone: 972-265-4900 1301 East Plano Parkway Fax: 972-265-4949 Plano, Texas 75074-8524 www.clairex.com