CLE535W

CLE535W Preliminary ® High Power Green LED Flat Window Can, Hermetically Sealed 0.156 (3.96) 0.136 (3.45) 0.165 (4.19) 0.145 (3.68) 1.00 (25.4) min. Clairex March, 2006  Technologies, Inc. 0.100 (2.54) dia. 0.215 (5.46) 0.205 (5.21) CATHODE ANODE 0.190 (4.83) 0.176 (4.47) (connected to case) ANODE CATHODE 0.025 (0.64) max. 0.019 (0.48) 0.010 (0.25) max 0.016 (0.41) 0.147 (3.73) 0.137 (3.48) ALL DIMENSIONS ARE IN INCHES (MILLIMETERS) Case 3 features • Flat lens TO-46 Package • ±35° emission angle • High luminous flux • cathode connected to case • RoHS compliant description The CLE535W contains a GaN, high power output, green LED mounted on a TO-46 header. The TO-46 header provides the thermal environment for reliable operation over a wide temperature range. For additional information, call Clairex. absolute maximum ratings (TA = 25°C unless otherwise stated) storage temperature ...................................................................... -65°C to +150°C operating temperature ................................................................... -65°C to +125°C lead soldering temperature(1) ......................................................................... 260°C (2) continuous forward current .......................................................................... 55mA reverse voltage ................................................................................................. 5.0V peak forward current (1.0ms pulse width, 10% duty cycle)............................. 0.25A continuous power dissipation(3) .................................................................... 200mW notes: 1. 0.06” (1.5mm) from case for 5 seconds maximum. 2. Derate linearly 0.44mA/°C from 25°C free air temperature to TA = +125°C. 3. Derate linearly 1.60mW/°C from 25°C free air temperature to TA = +125°C. electrical characteristics (TA = 25°C unless otherwise noted) symbol ΦV VF IR θHP λp parameter Luminous flux Forward voltage Reverse current Emission angle at half power points Peak Wavelength min 520 typ 1,200 3.2 70 530 max 3.6 10 540 units mlm V µA deg. nm test conditions IF = 20mA IF = 20mA VR = 5.0V IF = 20mA IF = 20mA Clairex reserves the right to make changes at any time to improve design and to provide the best possible product. Revised 3/20/06 Clairex Technologies, Inc. Phone: 972-265-4900 1301 East Plano Parkway Fax: 972-265-4949 Plano, Texas 75074-8524 www.clairex.com