CLI305

CLI305 IRED - Phototransistor Photointerrupter 1.322 (33.58) 1.302 (33.07) 0.510 (12.96) 0.442 (11.2) 0.490 (12.45) 0.432 (11.0) 0.380 (9.65) 0.370 (9.40) 0.260 (6.60) 0.240 (6.10) 1.01 (25.7) 0.99 (25.1) 0.510 (12.9) 0.490 (12.4) ® Clairex Technologies, Inc. September, 2001  0.188 (4.78) nom. RED BLUE (3) GREEN (5) 0.128 (3.25) dia. LEADS ARE #22 AWG, UL1429, 12.0 (304.8) MIN LONG. BLACK YELLOW (4) Case 36 ALL DIMENSIONS ARE IN INCHES (MILLIMETERS) Epoxy potting contour is not controlled. features • rugged plastic package • hermetically sealed discretes • narrow beam alignment description The CLI305 consists of an IRED and a phototransistor mounted in a black plastic housing. It features 12 inch leads and two holes for bracket mounting in any position. Output notes: is an emitter follower transistor 1. Derate linearly 1.07mW/°C from 25°C free air temperature to TA = +100°C. providing high gain, fast switching 2. 200mA when pulsed at 300µs, 2% duty cycle. speed and TTL interfacing. There is 3. Derate linearly 2.13mW/°C from 25°C free air temperature to TA = +100°C. a 0.005” wide aperture in front of the phototransistor. For assistance, call Clairex. absolute maximum ratings (TA = 25°C unless otherwise stated) storage and operating temperature……….………………………….-55°C to +100°C LED continuous forward DC current…………………………………………………….60mA reverse DC voltage……………………………………………………………………...3V power dissipation(1)………………………………………………………………..100mW OUTPUT TRANSISTOR collector-emitter voltage………………………………………………………………30V (2) maximum continuous collector current ………………………………………..100mA (3) power dissipation ………………………………………………………………..200mW electrical characteristics (TA = 25°C unless otherwise noted) symbol parameter Input IRED VF IR ID Forward voltage Reverse current Collector-emitter dark current Sensor current (lead 4) Voltage between leads 4 and 5(4) Voltage between leads 4 and 5(4) Output rise time(4) Output fall time(4) 4. 2.2kΩ resistor between leads 3 and 5. min 20 4.7 - typ 5 50 max 1.5 10 100 0.50 - units V µA nA mA V V µsec µsec test conditions IF = 16mA VR = 3V VCE = 10V, Ee = 0 IF = 10mA, VCE = 5V IF = 20mA, VCE = 5V Ee = 0 IC = 2.0mA, VCE = 10V IC = 2.0mA, VCE = 10V Output Transistor (leads 4 and 5) Coupled IL VO VOFF tr tf note: Clairex reserves the right to make changes at any time to improve design and to provide the best possible product. Revised 10/01/04 Clairex Technologies, Inc. Phone: 972-265-4900 1301 East Plano Parkway Fax: 972-265-4949 Plano, Texas 75074-8524 www.clairex.com