CLR130W

CLR130W,CLR131W,CLR132W NPN Silicon Photodarlingtons CLR130W, CLR131W, and CLRW132 are exact replacements for obsolete part numbers CLR2049, CLR2050 and CLR2060. 0.210 (5.33) 0.190 (4.83) 0.500 (12.7) min 0.190 (4.83) 0.176 (4.47) ® Clairex 0.215 (5.46) 0.205 (5.21)  Technologies, Inc. April, 2002 COLLECTOR 0.160 (4.06) 0.150 (3.81) BASE EMITTER 0.100 (2.54) dia 0.010 (0.25) max 0.025 (0.64) max 0.019 (0.48) 0.016 (0.41) 0.147 (3.73) 0.137 (3.48) ALL DIMENSIONS ARE IN INCHES (MILLIMETERS) Case 18 features absolute maximum ratings (TA = 25°C unless otherwise stated) storage temperature........................................................................-65°C to +150°C • high sensitivity operating temperature ....................................................................-65°C to +125°C • ±35° acceptance angle lead soldering temperature(1) ..........................................................................260°C • TO-18 hermetically sealed package collector-emitter voltage .................................................................................... 15V • transistor base is bonded continuous collector current ........................................................................... 50mA • RoHS compliant continuous power dissipation(2) ....................................................................250mW description The CLR130W-CLR132W series are notes: 1. 0.06” (1.5mm) from the header for 5 seconds maximum NPN silicon photodarlingtons 2. Derate linearly 2.0mW/°C from 25°C free air temperature to TA = +125°C. mounted in TO-18 flat window packages. The wide acceptance angle provided by the flat window enables even reception over a relatively large area. Photodarlingtons allow high sensitivity at low irradiance levels These devices are mechanically and spectrally matched to the CLE130-CLE133 series IREDs. For additional information, call Clairex. electrical characteristics (TA = 25°C unless otherwise noted) symbol parameter Light current(1) IL ICEO V(BR)CEO tr tf θHP Collector dark current Collector-emitter breakdown Output rise time Output fall time Total angle at half sensitivity points CLR130W CLR131W CLR132W min 0.2 0.6 1.4 15 typ 100 150 70 max 100 units mA mA mA nA V µs µs deg. test conditions VCE=5V, Ee=0.06mW/cm2 VCE=10V, Ee=0 IC=100µA VCE=5V, RL=100Ω. VCE=5V, RL=100Ω. note: 1. Radiation source for all light current testing is a 940nm IRED. Revised 3/13/06 Clairex reserves the right to make changes at any time to improve design and to provide the best possible product. Clairex Technologies, Inc. Phone: 972-265-4900 1301 East Plano Parkway Fax: 972-265-4949 Plano, Texas 75074-8524 www.clairex.com