CPC1001N

CPC1001N Unidirectional Input, Single-Transistor Output Optocoupler Parameter Breakdown Voltage BVCEO Current Transfer Ratio (Min) Saturation Voltage Input Control Current Rating 30 100 0.3 0.2 Units V % V mA Description CPC1001N is a unidirectional input optocoupler with a single transistor output. Current transfer ratios range from 100% to 800%. Features • • • • • Small 4 Pin SOP Package 100mA Continuous Load Rating 1500Vrms Input/Output Isolation Machine Insertable, Wave Solderable Surface Mount and Tape & Reel Version Available Approvals • UL Recognized Component: File # E76270 • EN/IEC 60950-1 Compliant • CSA Certified Component: Certificate # 1172007 Ordering Information Applications • • • • • • • • Loop Detect Ringing Detect Sensor Circuitry Instrumentation Multiplexers Data Acquisition I/O Subsystems Industrial Control Part # CPC1001N CPC1001NTR Description 4-Pin SOP (100/Tube) 4-Pin SOP Surface Mount (2000/Reel) Pin Configuration + Control 1 4 Load – Control 2 3 Load Pb RoHS 2002/95/EC e3 www.clare.com 1 DS-CPC1001N-R03 CPC1001N Absolute Maximum Ratings Parameter Input Power Dissipation 1 Input Control Current Peak (10ms) Reverse Input Voltage Phototransistor 2 Isolation Voltage, Input to Output Operational Temperature Storage Temperature 1 2 Ratings 150 5 1 5 150 1500 -40 to +85 -40 to +125 Units mW mA A V mW Vrms °C °C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Derate Linearly 1.33 mW / ºC Derate Linearly 2.00 mW / ºC Electrical absolute maximum ratings are at 25°C Electrical Characteristics Parameters Output Characteristics @ 25°C Phototransistor Blocking Voltage Phototransistor Output (Dark) Current Saturation Voltage Current Transfer Ratio Output Capacitance Input Characteristics @ 25°C Input Control Current Input Voltage Drop Input Reverse Current Common Characteristics @ 25°C Input to Output Capacitance Conditions ICEO=10µA IF=0mA, VCEO=5V IF=1mA, IC=1mA IF=0.2mA, VCE=0.5V VCEO=25V, f=1MHz IC=0.2mA, VCE=0.5V IF=5mA VR=5V Symbol BVCEO ICEO VCE(sat) CTR COUT IF VF IR CI/O Min 30 100 0.9 Typ 90 9 330 6 0.1 1.2 3 Max 500 0.3 800 0.2 1.4 10 Units VP nA V % pF mA V µA pF Switching Characteristics @ 25ºC Characteristic Turn-On Time Turn-Off Time Symbol tON tOFF Test Condition IF=2mA, VCC=5V, RL=1KΩ Typ 1 30 Units μs Switching Time Test Circuit VCC RL IF VCE 90% 10% t ON t OFF Pulse Width=5ms Duty Cycle=1% IF VCE 2 www.clare.com R03 CPC1001N PERFORMANCE DATA* LED Voltage vs. LED Current (TA=25ºC) 100 LED Forward Current (mA) 50 LED Forward Current (mA) 40 30 20 10 0 1.1 LED Voltage vs. LED Current (TA=25ºC) LED Forward Voltage (V) LED Forward Voltage vs. Temperature 1.6 1.5 1.4 1.3 1.2 1.1 1.0 -40 IF=2mA IF=1mA IF=0.2mA -20 0 20 40 60 Temperature (ºC) 80 100 IF=50mA IF=20mA IF=10mA IF=5mA 10 1 1.2 1.3 1.4 1.5 LED Forward Voltage (V) 1.6 0.1 1.1 1.2 1.3 1.4 1.5 LED Forward Voltage (V) 1.6 100 Typical ICE Current vs. Temperature (VCE=0.5V) IF=10mA IF=5mA IF=2mA IF=1mA IF=0.5mA IF=0.2mA IF=0.1mA Collector Current (mA) 30 25 Typical Voltage vs. Current (TA=25ºC) IF=10mA 350 300 CTR (%) Typical CTR vs. LED Forward Current (VCE=0.5V) Typical ICE (mA) 10 20 IF=5mA 15 10 5 0 0.0 0.2 0.4 0.6 0.8 Collector Voltage (V) IF=2mA IF=1mA IF=0.5mA IF=0.2mA 1.0 1.2 250 200 150 100 0.1 55ºC 25ºC 85ºC -40ºC 1 LED Forward Current (mA) 10 1 0.1 -40 -20 0 20 40 60 Temperature (ºC) 80 100 0.20 Saturation Voltage (V) 0.18 0.16 0.14 0.12 0.10 0.08 -40 Typical Saturation Voltage vs. Temperature (IF=2mA, IC=1mA) Blocking Voltage (VP) Blocking Voltage vs. Temperature 96 Leakage Current (nA) 95 94 93 92 91 90 89 88 500 400 Collector Leakage Current vs. Temperature VCC=10V 300 200 100 0 -40 VCC=5V VCC=3V -20 0 20 40 60 Temperature (ºC) 80 100 -40 -20 0 20 40 60 Temperature (ºC) 80 100 -20 0 20 40 60 Temperature (ºC) 80 100 3.0 2.5 Turn-On Time (μs) 2.0 1.5 1.0 0.5 0.0 Turn-On Time vs. Load Resistance (TA=25ºC, VCC=5V) 1000 Turn-Off Time (μs) Turn-Off Time vs. Load Resistance (TA=25ºC, VCC=5V) IF=1mA 100 IF=2mA IF=5mA IF=5mA IF=2mA IF=1mA Refer to the Test Circuit on the previous page for these two graphs. 10 0.1 1 10 Load Resistance (kΩ) 100 0.1 1 10 Load Resistance (kΩ) 100 *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R03 www.clare.com 3 CPC1001N MANUFACTURING INFORMATION Moisture Sensitivity Clare has characterized the moisture reflow sensitivity of this package, and has determined that this component must be handled in accordance with IPC/JEDEC standard J-STD-033 moisture sensitivity level (MSL), level 3 classification. Soldering Reflow Profile For proper assembly, the component must be processed in accordance with the current revision of IPC/JEDEC standard J-STD-020. Failure to follow the recommended guidelines may cause permanent damage to the device resulting in impaired performance and/or a reduced lifetime expectancy. Washing Clare does not recommend ultrasonic cleaning or the use of chlorinated solvents. Pb RoHS 2002/95/EC e3 MECHANICAL DIMENSIONS 4-Pin SOP Package 4.089 ± 0.203 (0.161 ± 0.008) 0.200 ± 0.025 (0.008 ± 0.001) Recommended PCB Land Pattern 0.60 (0.0217) 3.810 ± 0.076 (0.150 ± 0.003) Pin 1 2.54 Typ (0.100 Typ) 2.184 Max (0.086 Max) 6.096 ± 0.102 (0.240 ± 0.004) 1.02 ± 0.025 (0.040 ± 0.001) 0.432 ± 0.127 (0.017 ± 0.005) 1.30 (0.0512) 2.54 (0.10) 5.60 (0.2205) 0.0254 - 0.102 (0.001 - 0.004) 0.381 TYP. (0.015 TYP.) Dimensions mm (inches) Tape and Reel Packaging for 4-Pin SOP Package 330.2 Dia (13.00 Dia) Top Cover Tape Thickness 0.102 Max (0.004 Max) W=12.00 Max (0.472 Max) B0=4.70 (0.185) Pin 1 K0=2.70 (0.106) K1=2.30 (0.091) Embossed Carrier P=8.00 (0.315) A0=6.50 (0.256) User Direction of Feed Dimensions mm (inches) Embossment NOTE: Tape dimensions not shown comply with JEDEC Standard EIA-481-2 For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-CPC1001N-R03 ©Copyright 2008, Clare, Inc. OptoMOS® is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 9/24/08