CPC1019NTR

CPC1019N 4-Pin SOP OptoMOS® Relay Parameter Blocking Voltage Load Current Load Current, Peak AC Max On-resistance LED Current to operate Rating 60 750 1 0.6 2 Units VP mA Description CPC1019N is a miniature, low-voltage, low on-resistance, 1-Form-A solid state relay in a small, 4-Pin SOP package. Embodying Clare's patented OptoMOS technology, the CPC1019N comprises a highly efficient GaAlAs infrared LED that is optically coupled to efficient MOSFET output switches to provide 1500Vrms of input-to-output isolation. Clare’s state of the art double-molded vertical construction packaging produces a very compact solid state relay that is ideal for replacing larger, less-reliable reed and electromechanical relays. A Ω mA Features • • • • • • • • • • • • Low On-Resistance Low Drive Current High Load Current 100% Solid State Compact 4-Pin SOP Package TTL/CMOS Compatible input Arc-Free With No Snubbing Circuits 1500Vrms Input/Output Isolation No EMI/RFI Generation Immune to radiated EM fields SMD Pick & Place, Wave Solderable Tape & Reel Version Available Approvals • UL Recognized Component: File # E76270 • EN/IEC 60950-1 Compliant Ordering Information Applications • Security • Passive Infrared Detectors (PIR) • Data Signalling • Sensor Circuitry • Instrumentation • Multiplexers • Data Acquisition • Electronic Switching • I/O Subsystems • Utility Meters (gas, oil, electric and water) • Medical Equipment—Patient/Equipment Isolation • Aerospace • Industrial Controls • ATE Part # CPC1019N CPC1019NTR Description 4-Pin SOP (100/tube) 4-Pin SOP (2000/reel) Pin Configuration + Control 1 4 Load - Control 2 3 Load Switching Characteristics of Normally Open (Form A) Devices Control ILOAD + 90% 10%+ tOFF Pb RoHS 2002/95/EC e3 www.clare.com tON DS-CPC1019N-R01 1 CPC1019N Absolute Maximum Ratings Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation Total Power Dissipation 1 Isolation Voltage, Input to Output Operational Temperature Storage Temperature 1 Ratings 60 5 50 1 70 400 1500 -40 to +85 -40 to +125 Units VP V mA A mW mW Vrms °C °C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Derate Linearly 3.33 mw / ºC Electrical absolute maximum ratings are at 25°C Electrical Characteristics Parameter Output Characteristics @ 25°C Load Current Continuous Continuous, AC Peak Peak On-Resistance 1 Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics @ 25°C Input Control Current 2 Input Dropout Current Input Voltage Drop Reverse Input Current Common Characteristics @ 25°C Capacitance Input to Output 1 2 Conditions Symbol Min Typ Max Units IF=2mA t < 10ms IL=750mA VL=60V IL ILPK RON ILEAK tON tOFF COUT IF IF VF IR CI/O 0.1 0.9 - 0.35 0.4 0.4 60 0.15 0.14 1.2 1 750 1 3 0.6 1 3 3 2 1.4 10 - mADC A Ω μA ms ms pF mA mA V μA pF IF=5mA, VL=10V 50V; f=1MHz IL=750mA IF=5mA VR=5V - Measurement taken within 1 second of on time. For applications requiring high temperature operation (greater than 60oC) an LED drive current of 4mA is recommended. 2 www.clare.com R01 CPC1019N PERFORMANCE DATA* LED Forward Voltage Distribution (N=50, TA=25ºC, IF=5mA) Typical On-Resistance Distribution (N=50, TA=25ºC, IL=0.75A, IF=2mA) Typical Blocking Voltage Distribution (N=50, TA=25ºC) 25 20 15 10 5 0 20 35 30 Device Count (N) Device Count (N) 15 Device Count (N) 25 20 15 10 5 10 5 0 1.250 1.255 1.260 1.265 LED Forward Voltage (V) 1.270 0.31 0.32 0.33 0.34 0.35 On-Resistance (Ω) 0.36 0 74.5 75.0 75.5 76.0 76.5 Blocking Voltage (VP) 77.0 25 20 15 10 5 0 Typical IF for Switch Operation (N=50, TA=25ºC, IL=100mA) 25 20 15 10 5 0 Typical Turn-On Time Distribution (N=50, TA=25ºC, IL=100mA, IF=5mA) 25 20 Device Count (N) 15 10 5 0 Typical Turn-Off Time Distribution (N=50, TA=25ºC, IL=100mA, IF=5mA) Device Count (N) Device Count (N) 0.105 0.120 0.135 0.150 0.165 LED Current (mA) 0.180 0.335 0.385 0.435 0.485 0.535 Turn Off Time (ms) 0.585 0.38 0.39 0.40 0.41 0.42 Turn On Time (ms) 0.43 Typical LED Forward Voltage Drop vs. Temperature 1.6 LED Forward Voltage (V) Turn-On Time (ms) 1.5 1.4 1.3 1.2 1.1 1.0 -40 IF=5mA IF=2mA -20 0 20 40 60 Temperature (ºC) 80 100 IF=50mA IF=20mA IF=10mA 2.5 2.0 1.5 1.0 0.5 0.0 0 Typical Turn-On Time vs. LED Forward Current (IL=100mA) 0.41 0.40 Turn-Off Time(ms) 0.39 0.38 0.37 0.36 0.35 0.34 Typical Turn-Off Time vs. LED Forward Current (IL=100mA) 10 20 30 40 LED Forward Current (mA) 50 0 10 20 30 40 LED Forward Current (mA) 50 0.30 Typical LED Current to Operate vs. Temperature (IL=500mA) Turn-On Time (ms) 2.0 Typical Turn-On Time vs. Temperature (IL=100mA) Turn-Off Time (ms) IF=2mA 0.8 0.7 Typical Turn-Off Time vs. Temperature (IL=100mA) LED Current (mA) 0.25 1.5 IF=5mA 0.6 0.5 IF=2mA 0.4 0.3 0.2 -40 0.20 1.0 IF=5mA 0.15 0.5 0.10 -40 -20 0 20 40 60 Temperature (ºC) 80 100 0.0 -40 -20 0 20 40 60 Temperature (ºC) 80 100 -20 0 20 40 60 Temperature (ºC) 80 100 *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R01 www.clare.com 3 CPC1019N PERFORMANCE DATA* Typical Load Current vs. Load Voltage (IF=2mA) On-Resistance (Ω) 1000 750 Load Current (mA) 500 250 0 -250 -500 -750 0.70 0.65 0.60 0.55 0.50 0.45 0.40 0.35 0.30 0.3 0.4 Typical On-Resistance vs. Temperature (IL=500mA, IF=2mA) Load Current (mA) 800 750 700 650 600 550 500 450 Maximum Load Current vs. Temperature (IF=2mA) -1000 -0.4 -0.3 -0.2 -0.1 0.0 0.1 0.2 Load Voltage (V) 0.25 -40 -20 0 20 40 60 Temperature (ºC) 80 100 -40 -20 0 20 40 60 Temperature (ºC) 80 100 Typical Blocking Voltage vs. Temperature 79 Blocking Voltage (VP) Leakage Current (nA) 78 77 76 75 74 73 -40 80 70 60 50 40 30 20 10 0 -40 Typical Leakage Current vs. Temperature (VL=60V) 3.5 3.0 Load Current (A) 2.5 2.0 1.5 1.0 0.5 Energy Rating Curve (IF=2mA) -20 0 20 40 60 Temperature (ºC) 80 100 -20 0 20 40 60 Temperature (ºC) 80 100 0.0 10μs 100μs 1ms 10ms 100ms Time 1s 10s 100s *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com R01 CPC1019N Manufacturing Information Moisture Sensitivity Clare has characterized the moisture reflow sensitivity of this package, and has determined that this component must be handled in accordance with IPC/JEDEC standard J-STD-033 moisture sensitivity level (MSL), level 3 classification. Soldering Reflow Profile For proper assembly, the component must be processed in accordance with the current revision of IPC/JEDEC standard J-STD-020. Failure to follow the recommended guidelines may cause permanent damage to the device resulting in impaired performance and/or a reduced lifetime expectancy. Washing Clare does not recommend ultrasonic cleaning or the use of chlorinated solvents. Pb RoHS 2002/95/EC e3 MECHANICAL DIMENSIONS 4-Pin SOP Package 4.089 ± 0.203 (0.161 ± 0.008) 0.200 ± 0.025 (0.008 ± 0.001) Recommended PCB Land Pattern 0.60 (0.0217) 3.810 ± 0.076 (0.150 ± 0.003) Pin 1 2.54 Typ (0.100 Typ) 2.184 Max (0.086 Max) 6.096 ± 0.102 (0.240 ± 0.004) 1.02 ± 0.025 (0.040 ± 0.001) 0.432 ± 0.127 (0.017 ± 0.005) 1.30 (0.0512) 2.54 (0.10) 5.60 (0.2205) 0.0254 - 0.102 (0.001 - 0.004) 0.381 TYP. (0.015 TYP.) Dimensions mm (inches) Tape and Reel Packaging for 4-Pin SOP Package 330.2 Dia (13.00 Dia) Top Cover Tape Thickness 0.102 Max (0.004 Max) W=12.00 Max (0.472 Max) B0=4.70 (0.185) Pin 1 K0=2.70 (0.106) K1=2.30 (0.091) Embossed Carrier P=8.00 (0.315) A0=6.50 (0.256) User Direction of Feed Dimensions mm (inches) Embossment NOTE: Tape dimensions not shown comply with JEDEC Standard EIA-481-2 For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-CPC1019N-R01 ©Copyright 2008, Clare, Inc. OptoMOS® is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 11/3/08 5