CPC1117NTR

CPC1117N 4-Pin SOP OptoMOS® Relay Parameter Blocking Voltage Load Current Max On-Resistance LED Current to Operate Rating 60 150 16 1 Units VP mA Ω Description The CPC1117N is a miniature 1-Form-B solid state relay in a 4-Pin SOP package that employs optically coupled MOSFET technology to provide 1500Vrms of input/output isolation. The efficient MOSFET switches and photovoltaic die use Clare’s patented OptoMOS architecture. The optically coupled output is controlled by the input's highly efficient GaAlAs infrared LED using Clare’s state of the art double-molded vertical construction packaging to produce one of the world’s smallest relays. The CPC1117N offers board space savings of at least 20% over the competitor’s larger 4-Pin SOP relay. mA Features • Designed for use in security systems complying with EN50130-4 • Only 1mA of LED current required to operate • Small 4-Pin SOP Package • TTL/CMOS Compatible input • No Moving Parts • High Reliability • Arc-Free With No Snubbing Circuits • 1500Vrms Input/Output Isolation • No EMI/RFI Generation • Immune to radiated EM fields • SMD Pick & Place, Wave Solderable • Tape & Reel Version Available Approvals • UL Recognized Component: File # E76270 • EN/IEC 60950-1 Compliant • CSA Certified Component: Certificate # 1172007 Ordering Information Applications • Security • Passive Infrared Detectors (PIR) • Data Signalling • Sensor Circuitry • Instrumentation • Multiplexers • Data Acquisition • Electronic Switching • I/O Subsystems • Meters (Watt-Hour, Water, Gas) • Medical Equipment—Patient/Equipment Isolation • Aerospace • Industrial Controls Part # CPC1117N CPC1117NTR Description 4-Pin SOP (100/tube) 4-Pin SOP (2000/reel) Pin Configuration + Control 1 4 Load – Control 2 3 Load Switching Characteristics of Normally Closed (Form B) Devices CONTROL + ILOAD 90% tON +10% tOFF Pb RoHS 2002/95/EC e3 www.clare.com 1 DS-CPC1117N-R03 CPC1117N Absolute Maximum Ratings Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Disipation Total Power Dissipation 1 Isolation Voltage, Input to Output Operational Temperature Storage Temperature 1 Ratings 60 5 50 1 70 400 1500 -40 to +85 -40 to +125 Units VP V mA A mW mW Vrms °C °C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Derate Linearly 3.33 mw / ºC Electrical absolute maximum ratings are at 25°C Electrical Characteristics Parameter Output Characteristics @ 25°C Load Current Continuous 1 Peak On-Resistance 2 Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics @ 25°C Input Control Current 3 Input Dropout Current Input Voltage Drop Reverse Input Current Common Characteristics @ 25°C Capacitance Input to Output 1 2 3 Conditions Symbol Min Typ Max Units IF=0mA t=10ms IL=120mA VL=60V, IF=2mA IL ILPK RON ILEAK tON tOFF COUT IF IF VF IR - 0.3 0.9 - 5 25 0.65 0.5 1.2 1 150 350 16 1 1 2 1 1.4 10 - mA Ω µA IF=2mA, VL=10V 50V; f=1MHz IL=120mA IF=5mA VR=5V - ms pF mA mA V µA pF Load current derates linearly from 150mA @ 25oC to 100mA @85oC. Measurement taken within 1 second of on time. For applications requiring high temperature operation (greater than 60oC) an LED drive current of 3mA is recommended. 2 www.clare.com R03 CPC1117N PERFORMANCE DATA* CPC1117N Typical LED Forward Voltage Drop (N=50, TA=25ºC, IF=5mA) 35 30 Device Count (N) Device Count (N) 25 20 15 10 5 1.17 1.19 1.21 1.23 1.25 LED Forward Voltage Drop (V) 0 5.0 5.1 5.2 5.3 5.4 5.5 5.6 On-Resistance (Ω) 35 30 Device Count (N) 25 20 15 10 5 0 CPC1117N Typical On-Resistance Distribution (N=50, TA=25ºC, IL=150mA) 35 30 25 20 15 10 5 0 CPC1117N Typical Blocking Voltage Distribution (N=50, TA=25ºC, IF=1mA) 85 90 95 100 105 110 Blocking Voltage (VP) 115 25 20 15 10 5 0 CPC1117N Typical IF for Switch Operation (N=50, TA=25ºC, IL=150mA) 25 20 15 10 5 0 CPC1117N Typical IF for Switch Dropout (N=50, TA=25ºC, IL=150mA) 25 20 15 10 5 0 CPC1117N Typical Turn-On Time (N=50, TA=25ºC, IL=150mA, IF=2mA) Device Count (N) Device Count (N) Device Count (N) 0.35 0.40 0.45 0.50 0.55 0.60 LED Current (mA) 0.65 0.35 0.40 0.45 0.50 0.55 0.60 LED Current (mA) 0.65 0.28 0.30 0.32 0.34 0.36 Turn-On (ms) 0.38 0.40 25 20 15 10 5 0 CPC1117N Typical Turn-Off Time (N=50, TA=25ºC, IL=150mA, IF=2mA) Load Current (mArms) 225 200 175 150 125 100 75 50 25 0 CPC1117N Typical Load Current vs. Temperature (IF=0mA) 0.40 0.35 Leakage (µA) 0.30 0.25 0.20 0.15 0.10 0.05 0 CPC1117N Typical Leakage vs. Temperature Measured Across Pins 3 & 4 (IL=150mA, IF=2mA) Device Count (N) 0.30 0.32 0.34 0.36 0.38 Turn-Off (ms) 0.40 0.42 -40 -20 0 20 40 60 80 100 120 -40 -20 0 20 40 60 80 100 Temperature (ºC) Temperature (ºC) 125 Blocking Voltage (VP) 120 CPC1117N Typical Blocking Voltage vs. Temperature (IF=2mA) Turn-On (ms) 110 105 100 95 90 -40 -20 0 20 40 60 Temperature (ºC) 80 100 I F =2mA -20 0 20 40 60 80 100 Turn-Off (ms) 115 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 -40 CPC1117N Typical Turn-On vs. Temperature (IL=50mA) 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 -40 CPC1117N Typical Turn-Off vs. Temperature (IL=50mA) I F =2mA -20 0 20 40 60 80 100 Temperature (ºC) Temperature (ºC) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R03 www.clare.com 3 CPC1117N PERFORMANCE DATA* CPC1117N Typical LED Forward Voltage Drop vs. Temperature LED Forward Voltage Drop (V) 1.8 1.6 0.5 Time (ms) 1.4 1.2 1.0 0.8 -40 -20 0 20 40 60 80 100 120 Temperature (ºC) 0.4 0.3 0.2 0.1 0 0 5 10 15 20 25 30 35 40 45 50 LED Forward Current (mA) Time (ms) 0.7 0.6 CPC1117N Typical Turn-On vs. LED Forward Current (IL=50mA) CPC1117N Typical Turn-Off vs. LED Forward Current (IL=50mA) 0.50 0.45 0.40 0.35 0.30 0.25 0.20 0.15 0.10 0.05 0 I F =50mA I F =30mA I F =20mA I F =10mA I F =5mA 0 5 10 15 20 25 30 35 40 45 50 LED Forward Current (mA) 8 7 On-Resistance (Ω) CPC1117N Typical On-Resistance vs. Temperature (IL=150mA, IF=0mA) 1.75 1.50 LED Current (mA) 1.25 1.00 0.75 0.50 0.25 CPC1117N Typical IF for Switch Operation vs. Temperature (IL=50mA) Load Current (mA) 150 100 50 0 -50 -100 CPC1117N Typical Load Current vs. Load Voltage (TA=25ºC) 6 5 4 3 2 -40 -20 0 20 40 60 80 100 Temperature (ºC) -40 -20 0 20 40 60 Temperature (ºC) 80 100 -150 -1.00 -0.66 -0.33 0 0.33 0.66 1.00 Load Voltage (V) CPC1117N Energy Rating Curve 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 10μs 100μs 1ms 10ms 100ms Time Load Current (A) 1s 10s 100s *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com R03 CPC1117N MANUFACTURING INFORMATION Moisture Sensitivity Clare has characterized the moisture reflow sensitivity of this package, and has determined that this component must be handled in accordance with IPC/JEDEC standard J-STD-033 moisture sensitivity level (MSL), level 3 classification. Soldering Reflow Profile For proper assembly, the component must be processed in accordance with the current revision of IPC/JEDEC standard J-STD-020. Failure to follow the recommended guidelines may cause permanent damage to the device resulting in impaired performance and/or a reduced lifetime expectancy. Washing Clare does not recommend ultrasonic cleaning or the use of chlorinated solvents. Pb RoHS 2002/95/EC e3 Mechanical Dimensions 4-Pin SOP Package 4.089 ± 0.203 (0.161 ± 0.008) 0.200 ± 0.025 (0.008 ± 0.001) Recommended PCB Land Pattern 0.60 (0.0217) 3.810 ± 0.076 (0.150 ± 0.003) Pin 1 2.54 Typ (0.100 Typ) 2.184 Max (0.086 Max) 6.096 ± 0.102 (0.240 ± 0.004) 1.02 ± 0.025 (0.040 ± 0.001) 0.432 ± 0.127 (0.017 ± 0.005) 1.30 (0.0512) 2.54 (0.10) 5.60 (0.2205) 0.0254 - 0.102 (0.001 - 0.004) 0.381 TYP. (0.015 TYP.) Dimensions mm (inches) Tape and Reel Packaging for 4-Pin SOP Package 330.2 Dia (13.00 Dia) Top Cover Tape Thickness 0.102 Max (0.004 Max) W=12.00 Max (0.472 Max) B0=4.70 (0.185) Pin 1 K0=2.70 (0.106) K1=2.30 (0.091) Embossed Carrier P=8.00 (0.315) A0=6.50 (0.256) User Direction of Feed Dimensions mm (inches) Embossment NOTE: Tape dimensions not shown comply with JEDEC Standard EIA-481-2 For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-CPC1117N-R03 ©Copyright 2008, Clare, Inc. OptoMOS® is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 9/16/08 5