CPC1217Y

CPC1217 4-Pin SIP OptoMOS® Relay Description The CPC1217 is a voltage-controlled, single-pole, normally open (1-Form-A), optically coupled solid state relay configuration in a 4-pin Single In-line Package (SIP). Clare's patented OptoMOS architecture makes available the optically coupled technology necessary to activate the output's efficient MOSFET switches while providing a 2500Vrms input-to-output isolation barrier. Control of the isolated output is accomplished by means of a highly effective GaAlAs infrared LED at the input while the internal resistor in series with the LED enables the input voltage-controlled operation. Because the input is solid state there is no need for snubbers or "catch" diodes to suppress the inductive flyback transient voltage normally associated with EMR coils. Parameter Blocking Voltage Load Current Max RON Input Voltage to operate Rating 60 200 16 5-12 Units VP mA Ω V Features • • • • • • • • • • 100% Solid State Voltage-controlled operation Matches popular reed relay pin-out Designed for use in security systems complying with EN50130-4 Small 4-Pin SIP Package Arc-Free With No Snubbing Circuits 2500Vrms Input/Output Isolation No EMI/RFI Generation Immune to radiated EM fields Auto Pick & Place, Wave Solderable Approvals • UL Recognized Component: File # E76270 • EN/IEC 60950 Compliant • CSA Certified Component: Certificate # 1172007 Applications • Security • Passive Infrared Detectors (PIR) • Data Signalling • Sensor Circuitry • Instrumentation • Multiplexers • Data Acquisition • Electronic Switching • I/O Subsystems • Energy Meters • Medical Equipment—Patient/Equipment Isolation • Aerospace • Industrial Controls Ordering Information Part # CPC1217Y Description 4-Pin SIP (25/tube) Pin Configuration CPC1217 Pinout 1 2 + 3 – 4 Switching Characteristics of Normally Open (Form A) Devices CONTROL ILOAD + 90% 10%+ Pb RoHS 2002/95/EC e3 www.clare.com TON TOFF DS-CPC1217-R03 1 CPC1217 Absolute Maximum Ratings Parameter Blocking Voltage Reverse Input Voltage Input Control Voltage Input Power Dissipation Total Power Dissipation 1 Isolation Voltage Input to Output Operational Temperature Storage Temperature 1 Ratings 60 5 15 225 800 2500 -40 to +85 -40 to +125 Units VP V V mW mW Vrms °C °C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Derate Linearly 6.67 mw / ºC Electrical absolute maximum ratings are at 25°C Electrical Characteristics Parameter Output Characteristics @ 25°C Load Current Continuous Peak On-Resistance 1 Off-State Leakage Current Switching Speeds Turn-On (Output Closed) Turn-Off (Output Open) Output Capacitance Input Characteristics @ 25°C Input Control Voltage Output Closed Recommended Operating Range Output Open Reverse Input Current Input Resistor Common Characteristics @ 25°C Capacitance, Input to Output 1 Conditions Symbol Min Typ Max Units VIN=5V t≤10ms IL=200mA VL=60VP IL ILPK RON ILEAK TON TOFF COUT - 25 200 400 16 1 5 5 mA Ω μA VIN=5V, VL=10V VIN=0V, VL=50V; f=1MHz ms pF IL=200mA VIN=-5V VIN IR 5 1 900 - 1000 1 3.75 12 10 1100 V μA Ω pF Measurement taken within 1 second of on time. 2 www.clare.com R03 CPC1217 PERFORMANCE DATA* CPC1217 Typical On-Resistance Distribution (TA=25ºC, IL=100mA, VIN=5V) CPC1217 Typical Blocking Voltage Distribution (TA=25ºC) CPC1217 Typical Input Voltage for Switch Operation (TA=25ºC, IL=100mA) 35 30 Device Count (N) 35 30 Device Count (N) 25 20 15 10 5 25 20 15 10 5 0 25 20 15 10 5 0 7.00 7.15 7.30 7.45 7.60 7.75 7.90 On-Resistance (Ω) 0 84 85 86 87 88 89 90 Device Count (N) 1.15 1.17 1.19 1.21 1.23 1.25 1.27 Blocking Voltage (VP) Input Voltage (V) 25 20 15 10 5 0 CPC1217 Typical VOFF for Switch Dropout (TA=25ºC, IL=100mA) 25 20 15 10 5 0 CPC1217 Typical Turn-On Time (TA=25ºC, IL=100mA, VIN=5V) 25 20 15 10 5 0 CPC1217 Typical Turn-Off Time (TA=25ºC, IL=100mA, VIN=5V) Device Count (N) Device Count (N) 1.13 1.15 1.17 1.19 1.21 1.23 1.25 Input Voltage (V) 0.150 0.165 0.180 0.195 0.210 0.225 0.240 Turn-On (ms) Device Count (N) 0.40 0.43 0.46 0.49 0.52 0.55 0.58 Turn-Off (ms) CPC1217 Typical Maximum Load Current vs. Temperature 225 200 Load Current (mA) 175 150 125 100 75 50 25 0 -40 -20 0 20 40 60 80 Temperature (ºC) 100 120 Leakage (μA) 0.016 0.014 CPC1217 Typical Leakage vs. Temperature Measured Across Pins 1 & 4) (VL=Max Rated) 94 Blocking Voltage (VP) 92 90 88 86 84 82 80 -40 CPC1217 Typical Blocking Voltage vs. Temperature VIN = 5V 0.012 0.010 0.008 0.006 0.004 0.002 0 -40 -20 0 20 40 60 Temperature (ºC) 80 100 -20 0 20 40 60 Temperature (ºC) 80 100 0.30 0.27 0.24 0.21 0.18 0.15 0.12 0.09 0.06 0.03 0 -40 CPC1217 Typical Turn-On vs. Temperature (IL=100mA) VIN = 5V Turn-Off (ms) 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 -40 CPC1217 Typical Turn-Off vs. Temperature (IL=100mA) VIN = 5V 0.50 0.45 0.40 0.35 0.30 0.25 0.20 0.15 0.10 0.05 0 0 CPC1217 Typical Turn-On vs. Input Voltage (IL=100mA) Turn-On (ms) -20 0 20 40 60 Temperature (ºC) 80 100 -20 0 20 40 60 Temperature (ºC) 80 100 Turn-On (ms) 5 10 Input Voltage (V) 15 20 *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R03 www.clare.com 3 CPC1217 PERFORMANCE DATA* CPC1217 Typical Turn-Off vs. Input Voltage (IL=100mA) CPC1217 Typical On-Resistance vs. Temperature (IL=Max Rated @ Temperature) 1.45 VIN = 5V 10 Steady State 8 6 4 2 0 2 4 6 8 10 12 14 Input Voltage (V) 16 18 20 -40 -20 0 20 40 60 80 100 Temperature (ºC) 1.40 Input Voltage (V) 1.35 1.30 1.25 1.20 1.15 -40 -20 0 60 20 40 Temperature (ºC) 80 100 0.51 0.50 Turn-Off (ms) 0.49 0.48 0.47 0.46 0.45 0.44 14 12 On-Resistance (Ω) CPC1217 Typical Input Voltage for Switch Operation vs. Temperature (IL=100mA) 1.45 1.40 Input Voltage (V) 1.35 1.30 1.25 1.20 1.15 -40 CPC1217 Typical Input Voltage for Switch Dropout vs. Temperature (IL=100mA) Load Current (mA) CPC1217 Typical Load Current vs. Load Voltage (TA=25ºC, VIN=5V) 200 150 100 50 0 -50 -100 -150 Load Current (A) CPC1217 Energy Rating Curve 0.50 0.45 0.40 0.35 0.30 0.25 0.20 0.15 0.10 0.05 0 10μs 100μs 1ms 10ms 100ms Time -20 0 20 40 60 Temperature (ºC) 80 100 -200 -2.00 -1.50 -1.00 -0.50 0 0.50 1.00 1.50 2.00 Load Voltage (V) 1s 10s 100s *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com R03 MANUFACTURING INFORMATION Soldering For proper assembly, the component must be processed in accordance with the current revision of IPC/JEDEC standard J-STD-020. Failure to follow the recommended guidelines may cause permanent damage to the device resulting in impaired performance and/or a reduced lifetime expectancy. Washing Clare does not recommend ultrasonic cleaning or the use of chlorinated solvents. Pb RoHS 2002/95/EC e3 MECHANICAL DIMENSIONS 4-Pin SIP 19.202 ± 0.381 (0.756 ± 0.015) 3.302 ± 0.051 (0.130 ± 0.002) 6.401 ± 0.127 (0.252 ± 0.005) 2.642 ± 0.127 TYP (0.104 ± 0.005 TYP) PIN 1 5.944 ± 0.127 TYP (0.234 ± 0.005 TYP) 0.457 ± 0.076 TYP (0.018 ± 0.003 TYP) 5.080 ± 0127 (0.200 ± 0.005) 5.080 ± 0127 (0.200 ± 0.005) 3.251 ± 0.102 (0.128 ± 0.004) 0.254 ± 0.013 (0.010 ± 0.0005) NOTES: 1. Leadframe thickness does not include plating. (1000 microinches maximum) 2. Pin location tolerances are non-accumulative. Dimensions: mm (inches) For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-CPC1217-R03 ©Copyright 2008, Clare, Inc. OptoMOS® is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 7/16/08 5