CPC1230

CPC1230N 4 Pin SOP OptoMOS® Relay Load Voltage Load Current Max RON CPC1230 350 120 30 Units V mA Ω Features • Small 4 Pin SOP Package • Low Drive Power Requirements (TTL/CMOS Compatible) • No Moving Parts • High Reliability • Arc-Free With No Snubbing Circuits • Supplemental Isolation • FCC Compatible • 1500VRMS Input/Output Isolation • 0.4mm Distance Through Insulation • FCC Compatible • No EMI/RFI Generation • Machine Insertable, Wave Solderable • Tape & Reel Version Available Description The CPC1230N is a miniature 1-Form-A solid state relay in a 4 pin SOP package that employs optically coupled MOSFET technology to provide 1500V of input to output isolation and is BSI certified for supplemental insulation in accordance with EN60950. The efficient MOSFET switches and photovoltaic die use Clare’s patented OptoMOS® architecture. The optically coupled input is controlled by a highly efficient GaAIAs infrared LED. The CPC1230N uses Clare’s state of the art double molded vertical construction packaging to produce the world’s smallest 4 pin relay. The CPC1230N offers board space savings of at least 20% over the competitor’s larger 4 pin SOP relay. Approvals • UL/C-UL Recognized Component File #: E76270 • BSI Certified - Certificate #: 8416 (Supplementary Isolation Requirement of EN60950) Applications • Telecommunications • Telecom Switching • Tip/Ring Circuits • Modem Switching (Laptop, Notebook, Pocket Size) • Hookswitch • Dial Pulsing • Ground Start • Ringer Injection • Instrumentation • Multiplexers • Data Acquisition • Electronic Switching • I/O Subsystems • Meters (Watt-Hour, Water, Gas) • Medical Equipment—Patient/Equipment Isolation • Security • Aerospace • Industrial Controls Ordering Information Part # Description CPC1230N 4 Pin SOP (100/tube) CPC1230NTR 4 Pin SOP (2,000/reel) Pin Configuration CPC1030N Pinout + Control Ð Control 1 2 4 3 Load Load Switching Characteristics of Normally Open (Form A) Devices 10ms CONTROL LOAD 10%+ +90% TON 10%+ TOFF DS-CPC1230N-R2 www.clare.com 1 CPC1230N Absolute Maximum Ratings (@ 25˚ C) Parameter Input Power Dissipation Input Control Current Peak (10ms) Reverse Input Voltage Total Power Dissipation Capacitance Input to Output Isolation Voltage Input to Output Operational Temperature Storage Temperature Soldering Temperature (10 Seconds Max.) 1 2 Min 1500 -40 -40 - Typ Max Units - 1501 mW 50 mA 1 A 5 V - 4002 mW 1 pF Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for an extended period may degrade the device and effect its reliability. VRMS +85 °C +125 °C +220 °C Derate Linearly 1.33 mw / oC Derate Linearly 6.67 mw / oC Electrical Characteristics Parameter Output Characteristics @ 25°C Load Voltage (Peak) Load Current (Continuous) AC Peak 1 Peak Load Current On-Resistance2 Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics @ 25°C Input Control Current 3 Input Dropout Current Input Voltage Drop Reverse Input Voltage Reverse Input Current 1 2 3 Conditions - Symbol VL IL ILPK RON ILEAK TON TOFF COUT IF IF VF VR IR Min 2 0.3 0.9 - Typ 25 25 0.9 1.2 - Max 350 120 350 30 1 2 1.0 50 1.4 5 10 Units V mA mA Ω µA ms ms pF mA mA V V µA 10ms IL=120mA VL=350V IF=5mA, VL=10V IF=5mA, VL=10V 50V; f=1MHz IL=120mA IF=5mA VR=5V Load current derates linearly from 120mA @ 25oC to 80mA @ 85oC. Measurement taken within 1 second of on time. For applications requiring high temperature operation (greater than 60oC) an LED drive current of 10mA is recomended. 2 www.clare.com Rev. 2 CPC1230N PERFORMANCE DATA* CPC1230N Typical LED Forward Voltage Drop (Ambient Temperature = 25 C) IF = 5mADC o CPC1230N Typical On-Resistance Distribution (Ambient Temperature = 25 C) (Load Current = 120mA) o 35 30 35 30 35 30 Device Count (N) CPC1230N Typical Blocking Voltage Distribution (Ambient Temperature = 25oC) Device Count (N) Device Count (N) 25 20 15 10 5 0 1.17 1.19 1.21 1.23 1.25 25 20 15 10 5 0 23.5 24 24.5 25 25.5 26 26.5 25 20 15 10 5 0 370 375 380 385 390 395 400 LED Forward Voltage Drop (V) On-Resistance (Ω) Blocking Voltage (V) CPC1230N Typical IF for Switch Operation (Ambient Temperature = 25 C) (Load Current = 120mA) o CPC1230N Typical IF for Switch Dropout (Ambient Temperature = 25 C) (Load Current = 120mA) o CPC1230N Typical Turn-On Time (Ambient Temperature = 25 C) (Load Current = 120mA; IF = 5mA) o 25 25 25 Device Count (N) Device Count (N) 15 15 Device Count (N) 0.65 0.70 0.75 0.80 0.85 0.90 0.95 20 20 20 15 10 10 10 5 5 5 0 0.60 0.65 0.70 0.75 0.80 0.85 0.90 0 0 0.85 0.90 1.00 1.10 1.15 1.20 1.25 LED Current (mA) LED Current (mA) Turn-On (ms) CPC1230N Typical Turn-Off Time (Ambient Temperature = 25 C) (Load Current = 120mA; IF = 5mA) o 25 Device Count (N) 20 Leakage (µA) 15 10 5 0 0.21 0.22 0.23 0.24 0.25 0.26 0.27 180 160 140 120 100 80 60 40 20 0 CPC1230N Typical Load Current vs. Temperature 0.016 0.014 0.012 0.010 0.008 0.006 0.004 0.002 CPC1230N Typical Leakage vs. Temperature (Measured across Pins 3 & 4) IL = max rated Load Current (mA) IF = 10mA IF = 5mA -40 -20 0 Turn-Off (ms) Temperature (oC) 20 40 60 80 100 120 0 -40 -20 0 20 40 60 80 100 Temperature (oC) 400 395 390 385 380 375 370 365 CPC1230N Typical Blocking Voltage vs. Temperature -40 -20 0 Temperature (oC) 20 40 60 80 100 5.000 4.500 4.000 3.500 3.000 2.500 2.000 1.500 1.000 0.500 0 CPC1230N Typical Turn-On vs. Temperature (Load Current = 80mA) 5mA 10mA -40 -20 0 Temperature (o C) 20 40 60 80 100 1.000 0.900 0.800 0.700 0.600 0.500 0.400 0.300 0.200 0.100 0 CPC1230N Typical Turn-Off vs. Temperature (Load Current = 80mA) Blocking Voltage (VRMS) Turn-Off (ms) Turn-On (ms) 10mA -40 -20 0 Temperature (oC) 20 40 60 80 5mA 100 The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. Rev. 2 www.clare.com 3 CPC1230N PERFORMANCE DATA* CPC1230N Typical LED Forward Voltage Drop vs. Temperature LED Forward Voltage Drop (V) 1.8 1.6 1.4 1.2 50mA 30mA 20mA 10mA 5mA 1.0 0.8 -40 -20 0 20 40 60 80 100 120 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 CPC1230N Typical Turn-On vs. LED Forward Current (Load Current = 120mA) 0 5 10 15 20 25 30 35 40 45 50 LED Forward Current (mA) 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 CPC1030N Typical Turn-Off vs. LED Forward Current (Load Current = 120mA) Turn-On (ms) Turn-Off (ms) 0 5 10 15 20 25 30 35 40 45 50 LED Forward Current (mA) Temperature (oC) CPC1230N Typical On-Resistance vs. Temperature (Load Current = 80mA; IF = 10mA) 60 50 40 30 20 10 0 -40 -20 0 20 40 o CPC1230N Typical IF for Switch Operation vs. Temperature (Load Current = 80mA) 3.000 2.500 LED Current (mA) 2.000 1.500 1.000 0.500 0 -40 -20 0 20 40 o CPC1230N Typical IF for Switch Dropout vs. Temperature (Load Current = 80mA) 3.000 2.500 LED Current (mA) 2.000 1.500 1.000 0.500 0 On-Resistance (Ω) 60 80 100 60 80 100 -40 -20 0 20 40 60 80 100 Temperature ( C) Temperature ( C) Temperature (oC) 150 Load Current (mA) CPC1230N Typical Load Current vs. Load Voltage (Ambient Temperature = 25oC) IF = 5mA 100 50 0 -50 -100 -150 -3 -2 -1 0 1 2 3 Load Current (A) 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 10µs 100µs 1ms 10ms 100ms 1s Time CPC1230N Energy Rating Curve 10s 100s Load Voltage (V) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com Rev. 2 CPC1230N Mechanical Dimensions 4 Pin SOIC Narrow (“N” Suffix) 6.09 ± .25 (.240 ± .010) .38 x 45 (.015 x 45 ) .38 TYP. (.015 TYP.) 3.81 ± .13 (.150 ± .005) 1.01 ± .025 (.040 ± .001) 0.432 ± 0.127 (.017 ± .005) .20 ± .025 (.008 ± .001) 2.18 MAX. (.086) 2.54 TYP. (.100 TYP.) 4.09 ± 0.20 (0.161 ± 0.008) PC Board Pattern (Top View) 2.54 ± 0.127 (0.100 ± 0.005) 5.66 ± 0.14 (0.223 ± 0.005) 1.448 (0.057) 0.889 (0.035) Dimensions mm (inches) Rev. 2 www.clare.com 5 Worldwide Sales Offices CLARE LOCATIONS Clare Headquarters 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE Clare Micronix Division 145 Columbia Aliso Viejo, CA 92656-1490 Tel: 1-949-831-4622 Fax: 1-949-831-4628 EUROPE European Headquarters CP Clare nv Bampslaan 17 B-3500 Hasselt (Belgium) Tel: 32-11-300868 Fax: 32-11-300890 France Clare France Sales Lead Rep 99 route de Versailles 91160 Champlan France Tel: 33 1 69 79 93 50 Fax: 33 1 69 79 93 59 Germany Clare Germany Sales ActiveComp Electronic GmbH Mitterstrasse 12 85077 Manching Germany Tel: 49 8459 3214 10 Fax: 49 8459 3214 29 Italy C.L.A.R.E.s.a.s. Via C. Colombo 10/A I-20066 Melzo (Milano) Tel: 39-02-95737160 Fax: 39-02-95738829 Sweden Clare Sales Comptronic AB Box 167 S-16329 Spånga Tel: 46-862-10370 Fax: 46-862-10371 United Kingdom Clare UK Sales Marco Polo House Cook Way Bindon Road Taunton UK-Somerset TA2 6BG Tel: 44-1-823 352541 Fax: 44-1-823 352797 ASIA PACIFIC Asian Headquarters Clare Room N1016, Chia-Hsin, Bldg II, 10F, No. 96, Sec. 2 Chung Shan North Road Taipei, Taiwan R.O.C. Tel: 886-2-2523-6368 Fax: 886-2-2523-6369 SALES OFFICES AMERICAS Americas Headquarters Clare 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE Eastern Region Clare P.O. Box 856 Mahwah, NJ 07430 Tel: 1-201-236-0101 Fax: 1-201-236-8685 Toll Free: 1-800-27-CLARE Central Region Clare Canada Ltd. 3425 Harvester Road, Suite 202 Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 Western Region Clare 1852 West 11th Street, #348 Tracy, CA 95376 Tel: 1-209-832-4367 Fax: 1-209-832-4732 Toll Free: 1-800-27-CLARE Canada Clare Canada Ltd. 3425 Harvester Road, Suite 202 Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 http://www.clare.com Clare cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in this Clare product. No circuit patent licenses nor indemnity are expressed or implied. Clare reserves the right to change the specification and circuitry, without notice at any time. The products described in this document are not intended for use in medical implantation or other direct life support applications where malfunction may result in direct physical harm, injury or death to a person. Specification: DS-CPC1230N-R2 ©Copyright 2000, Clare, Inc. OptoMOS® is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 1/12/01