CPC1317P

CPC1317 Single-Pole Relay With Bidirectional Transient Protection Parameter Blocking Voltage Load Current Max On-Resistance LED Current to Operate Rating 70 150 16 1 Units VP mA Ω mA OptoMOS® Description The CPC1317 is a single-pole normally open (1-Form-A) solid state relay with bi-directional transient voltage suppressor (TVS) relay protection, which is designed to meet the requirements of EN50130-4 (installation class 3). The relay output is constructed with efficient MOSFET switches and photovoltaic die that use Clare's patented OptoMOS architecture. The input, a highly efficient GaAlAS infrared LED, controls the optically coupled output. The CPC1317 is available in an 8-pin, space-saving surface-mount package. Transient Protection Characteristics Peak Pulse Power 600W VWM 40.2V Features • 100% Solid State • Low Drive Power Requirements (TTL/CMOS Compatible) • No Moving Parts • High Reliability • Arc-Free With No Snubbing Circuits • 3750Vrms Input/Output Isolation • No EMI/RFI Generation • Machine Insertable, Wave Solderable Approvals • UL Recognized Component: File # E76270 • EN/IEC 60950 Compliant • CSA Certified Component: Certificate # 1172007 Ordering Information Part # CPC1317P CPC1317PTR Description 8-Pin Flatpack (50/tube) 8-Pin Flatpack (1000/reel) Applications • • • • • • • • • Security Sensor Circuitry Instrumentation Multiplexers Data Acquisition Electronic Switching I/O Subsystems Aerospace Industrial Controls Pin Configuration 1 2 + Control – Control 3 4 8 7 6 5 TVS +/TVS -/+ Load Load Switching Characteristics of Normally Open (Form A) Devices Control ILOAD + 90% 10%+ tOFF tON Pb RoHS 2002/95/EC e3 www.clare.com 1 DS-CPC1317-R03 CPC1317 Absolute Maximum Ratings Parameter SSR Output Blocking Voltage TVS Working Voltage, Maximum Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation 1 SSR Output Power Dissipation 2 TVS Peak Pulse Power (IPP=9.3A, 10/1000μs pulse) Isolation Voltage Input to Output Operating Temperature Storage Temperature 1 2 Ratings 70 40.2 5 50 1 150 400 600 3750 -40 to +85 -40 to +125 Units VP V V mA A mW mW W Vrms °C °C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Derate Linearly 1.33 mw / ºC Derate Linearly 6.67 mw / ºC Electrical absolute maximum ratings are at 25°C SSR Electrical Characteristics Parameter Output Characteristics @ 25°C Load Current Continuous Peak On-Resistance 1 Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics @ 25°C Input Control Current 2 Input Dropout Current Input Voltage Drop Common Characteristics @ 25°C Capacitance Input to Output 1 2 Conditions Symbol Min Typ Max Units t=10ms IL=150mA, IF=1mA VL=70V IL ILPK RON ILEAK TON TOFF COUT IF IF VF CI/O 0.1 0.9 - 7 25 1.2 3 150 400 16 1 2.5 2.5 1 1.4 - mA Ω µA IF=5mA, VL=10V 50V; f=1MHz IL=150mA IF=5mA - ms pF mA mA V pF Measurement taken within 1 second of turn-on time. For applications requiring high temperature operation (> 60oC) a minimum LED drive current of 3mA is required. TVS Electrical Characteristics Parameter Clamping Voltage Reverse Breakdown Voltage Reverse Leakage Current Conditions IPP=9.3A I=1mA VWM=40.2V Symbol VC VBR IL Min 44.4 Typ Max 66.5 5 Units V V μA 2 www.clare.com R03 CPC1317 PERFORMANCE DATA* CPC1317 Typical LED Forward Voltage Drop (TA=25ºC, IF=5mA) CPC1317 Typical IF for Switch Operation (TA=25ºC, IL=100mA) CPC1317 Typical Turn-On Time (TA=25ºC, IL=100mA, IF=5mA) 35 30 25 Device Count (N) 20 15 10 5 0 25 20 15 10 5 0 75 Device Count (N) 25 20 15 10 5 0 1.21 1.22 1.23 1.24 1.25 LED Forward Voltage Drop (V) 0.12 0.14 0.16 0.18 0.20 LED Current (mA) 0.22 Device Count (N) 80 85 90 95 Turn-On (μs) 100 105 25 20 15 10 5 0 CPC1317 Typical Turn-Off Time (TA=25ºC, IL=100mA, IF=5mA) 20 CPC1317 o Typical On-Resistance Distribution (TA=25ºC, IL=100mA) 35 30 CPC1317 Typical Blocking Voltage Distribution (TA=25ºC) Device Count (N) Device Count (N) 15 Device Count (N) 25 20 15 10 5 10 5 0.35 0.40 0.45 0.50 0.55 Turn-Off (ms) 0.60 0.65 0 6.8 6.9 7.0 7.1 7.2 On-Resistance (Ω) 7.3 7.4 0 84 85 86 87 88 89 Blocking Voltage (VP) 90 CPC1317 LED Forward Voltage vs. Temperature 1.6 LED Forward Voltage (V) 1.5 1.4 1.3 1.2 1.1 1.0 -40 IF=5mA IF=2mA IF=1mA -20 0 20 40 60 Temperature (ºC) 80 100 Turn-On Time (μs) IF=50mA IF=20mA IF=10mA 600 500 400 300 200 CPC1317 Turn-On Time vs. Temperature 800 IF=1mA Turn-Off Time (μs) 700 600 500 400 300 200 -40 CPC1317 Turn-Off Time vs. Temperature IF=5mA IF=5mA 100 0 -40 IF=1mA -20 0 20 40 60 Temperature (ºC) 80 100 -20 0 20 40 60 Temperature (ºC) 80 100 CPC1317 Typical Turn-On Time vs. LED Forward Current 1200 1000 Turn-On Time (μs) Turn-Off Time (μs) 800 600 400 200 0 0 5 10 15 LED Forward Current (mA) 20 485 480 475 470 465 460 0 CPC1317 Typical Turn-Off Time vs. LED Forward Current 0.35 LED Current (mA) 5 10 15 LED Forward Current (mA) 20 CPC1317 LED Current to Operate vs. Temperature (IL=100mA) 0.30 0.25 0.20 0.15 -40 -20 0 20 40 60 Temperature (ºC) 80 100 *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R03 www.clare.com 3 CPC1317 PERFORMANCE DATA* CPC1317 On-Resistance vs. Temperature (IL=50mA, IF=1mA) Blocking Voltage (VP) CPC1317 Blocking Voltage vs. Temperature (Pins 5 & 6) 94 Load Current (mA) 92 90 88 86 84 -40 155 150 145 140 135 130 125 120 -20 0 20 40 60 Temperature (ºC) 80 100 -40 12 11 On-Resistance (Ω) 10 9 8 7 6 5 -40 CPC1317 Load Current vs. Temperature (IF=1mA) -20 0 20 40 60 Temperature (ºC) 80 100 -20 0 20 40 60 Temperature (ºC) 80 100 12 Leakage Current (μA) 10 8 6 4 2 0 -40 CPC1317 Leakage Current vs. Temperature Measured Between Pins 5 & 6 (VL=70V) 0.20 0.15 Load Current (A) 0.10 0.05 0.00 -0.05 -0.10 -0.15 CPC1317 Typical Load Current vs. Load Voltage (TA=25ºC, IF=1mA) Load Current (mA) CPC1317 Energy Rating Curve 1000 800 600 400 200 0 10μs 100μs 1ms 10ms 100ms Time -20 0 20 40 60 Temperature (ºC) 80 100 -0.20 -1.5 -1.0 -0.5 0.0 0.5 Load Voltage (V) 1.0 1.5 1s 10s 100s 52 TVS Breakdown Voltage (V) Leakage Current (nA) 51 50 49 48 47 46 45 -40 -20 0 20 40 60 Temperature (ºC) 80 100 25 20 15 10 5 Peak Pulse Power (% PPP @ 25ºC) CPC1317 TVS Diode Breakdown Voltage vs. Temperature (Pins 7 & 8) CPC1317 TVS Diode Leakage vs. Temperature (Pins 7 & 8) (VL=40V) CPC1317 TVS Derating Curve 120 100 80 60 40 20 0 -40 -20 0 20 40 60 Temperature (ºC) 80 100 0 -40 -20 0 20 40 60 Temperature (ºC) 80 100 CPC1317 TVS Pulse Waveform 10/1000 (μs) 110 100 90 80 70 60 50 40 30 20 10 0 PPP - Peak Pulse Current (% IPP) 1 10 100 104 1000 Time (μs) 105 106 *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com R03 MANUFACTURING INFORMATION Soldering For proper assembly, the component must be processed in accordance with the current revision of IPC/JEDEC standard J-STD-020. Failure to follow the recommended guidelines may cause permanent damage to the device resulting in impaired performance and/or a reduced lifetime expectancy. Washing Clare does not recommend ultrasonic cleaning or the use of chlorinated solvents. Pb RoHS 2002/95/EC e3 MECHANICAL DIMENSIONS 8 Pin Flatpack Package 2.540 ± 0.127 (0.100 ± 0.005) 6.350 ± 0.127 (0.250 ± 0.005) 9.398 ± 0.127 (0.370 ± 0.005) 2.159 TYP. (0.085 TYP.) 7.620 ± 0.254 (0.300 ± 0.010) 2.286 MAX. (0.090 MAX.) Recommended PCB Land Pattern 2.54 (0.10) 0.635 ± 0.127 (0.025 ± 0.005) 1.55 (0.0610) 8.70 (0.3425) 0.203 (0.008) 8.077 ± 0.127 (0.318 ± 0.005) 9.652 ± 0.381 (0.380 ± 0.015) 2.159 TYP. (0.085 TYP.) 0.65 (0.0255) 0.457 ± 0.076 (0.018 ± 0.003) Dimensions mm (inches) Tape and Reel Packaging for 8 Pin Flatpack Package W = 16.30 max (0.642 max) 330.2 DIA. (13.00 DIA.) 1 8 Bo = 10.30 (0.406) Top Cover Tape K0 = 2.70 (0.106) K1 = 2.00 (0.079) Top Cover Tape Thickness 0.102 MAX. (0.004 MAX.) P = 12.00 (0.472) Ao = 10.30 (0.406) Dimensions mm (inches) Embossed Carrier User Direction of Feed Embossment NOTE: Tape dimensions not shown comply with JEDEC Standard EIA-481-2 For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-CPC1317-R03 ©Copyright 2009, Clare, Inc. OptoMOS® is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 3/9/09 5