CPC1394GV

CPC1394 Single Pole OptoMOS® Relay Parameter Blocking Voltage Load Current Max On-resistance Rating 600 120 35 Units VP mA Ω Description The CPC1394 is a single-pole normally-open (1-Form-A) Solid State Relay with an enhanced input to output isolation barrier of 5000Vrms. Clare’s patented OptoMOS architecture makes available the optically coupled technology necessary to activate the output’s efficient MOSFET switches. Control of the isolated output is accomplished by means of the highly effective GaAlAs infrared LED at the input. Features • • • • • 5000Vrms Input/Output Isolation 600VP Blocking Voltage 100% Solid State Small 4-Pin Package Low Drive Power Requirements (TTL/CMOS Compatible) • Arc-Free With No Snubbing Circuits • No EMI/RFI Generation • Machine Insertable, Wave Solderable Approvals • UL Recognized Component: File # E76270 • EN/IEC 60950 Compliant • CSA Certified Component: Certificate # 1172007 Ordering Information Applications • Instrumentation • Multiplexers • Data Acquisition • Electronic Switching • I/O Subsystems • Meters (Watt-Hour, Water, Gas) • Medical Equipment—Patient/Equipment Isolation • Security • Aerospace • Industrial Controls Part Number CPC1394G CPC1394GV CPC1394GR CPC1394GRTR Description 4-Pin DIP (100/Tube) 4-Pin DIP V-Bend (100/Tube) 4-Pin Surface Mount (100/Tube) 4-Pin Surface Mount (1000/Reel) Pin Configuration + Control 1 4 Load – Control 2 3 Load Switching Characteristics of Normally Open (Form A) Devices Control ILOAD + 90% 10%+ tOFF tON Pb RoHS 2002/95/EC e3 www.clare.com 1 DS-CPC1394-R01 CPC1394 Absolute Maximum Ratings Parameter Peak Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation 1 Total Package Dissipation 2 Isolation Voltage, Input to Output Operational Temperature Storage Temperature 1 2 Ratings 600 5 50 1 100 550 5000 -40 to +85 -40 to +125 Units VP V mA A mW mW Vrms ºC ºC Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Derate Linearly 1.33 mW/ºC Derate Linearly 3.00 mW/ºC Electrical absolute maximum ratings are at 25ºC Electrical Characteristics Parameters Output Characteristics @ 25°C Load Current Continuous Peak On-resistance 1 Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics @ 25°C Input Control Current 2 Input Dropout Current Input Voltage Drop Reverse Input Current Common Characteristics @ 25°C Input to Output Capacitance 1 2 Conditions Symbol Min Typ Max Units t=10ms IL=120mA VL=600VP IF=5mA, VL=10V IF=0mA, VL=50V, f=1MHz IL=120mA IF=5mA VR=5V - IL ILPK RON ILEAK TON TOFF COUT IF IF VF IR CI/O 0.2 0.9 - 26 0.85 0.46 50 0.45 0.4 1.2 3 120 400 35 1 5 3 2 1.4 10 - mA Ω μA ms pF mA V μA pF Within 1 second of time. For temperatures >60ºC, an LED current of 4mA is recommended. 2 www.clare.com R01 CPC1394 PERFORMANCE DATA* Typical LED Forward Voltage Drop (N=50, TA=25ºC, IF=5mA) Typical On-Resistance Distribution (N=50, TA=25ºC, IL=120mA, IF=2mA) Typical Blocking Voltage Distribution (N=50, TA=25ºC) 35 30 Device Count (N) 25 20 15 10 5 0 25 20 15 10 5 0 20 Device Count (N) Device Count (N) 15 10 5 0 25.50 25.75 26.00 26.25 26.50 26.75 27.00 On Resistance (Ω) 680 685 690 695 700 705 710 Blocking Voltage (VP) 715 1.230 1.235 1.240 1.245 1.250 LED Forward Voltage (V) 1.255 20 Typical IF for Switch Operation (N=50, TA=25ºC, IL=120mA) Device Count (N)8 20 Typical Turn-On Time (N=50, TA=25ºC, IL=120mA, IF=5mA) 25 20 15 10 5 0 Typical Turn-Off Time (N=50, TA=25ºC, IL=120mA, IF=5mA) Device Count (N) 15 15 10 10 5 5 0 0.30 0.35 0.40 0.45 0.50 LED Current (mA) 0.55 0.60 0 0.65 0.70 0.75 0.80 0.85 0.90 0.95 1.00 Turn-On Time (ms) Device Count (N) 0.34 0.37 0.40 0.43 0.46 0.49 0.52 0.55 Turn-Off Time (ms) 130 Load Current (mA) 120 110 100 90 80 70 Typical Load Current vs. Temperature (IF=2mA) Leakage Current (nA) 100 80 60 40 20 0 -40 Typical Leakage vs. Temperature (VL=600V) Blocking Voltage (VP) Typical Blocking Voltage vs. Temperature 750 725 700 675 650 625 600 -40 -20 0 20 40 60 Temperature (ºC) 80 100 -20 0 20 40 60 Temperature (ºC) 80 100 -40 -20 0 20 40 60 Temperature (ºC) 80 100 3.0 Turn-On Time (ms) 2.5 Typical Turn-On vs. Temperature (IL=70mA) 900 800 Turn-Off Time (μs) Typical Turn-Off vs. Temperature (IL=70mA) IF=5mA Typical LED Forward Voltage Drop vs. Temperature 1.6 1.5 LED VF (V) IF=50mA IF=20mA IF=10mA IF=2mA 2.0 1.5 IF=5mA 1.0 0.5 -40 -20 0 20 40 60 Temperature (ºC) 80 100 700 600 500 400 300 200 -40 -20 0 20 40 60 Temperature (ºC) 80 100 IF=2mA 1.4 1.3 1.2 1.1 1.0 -40 IF=5mA IF=2mA -20 0 20 40 60 Temperature (ºC) 80 100 *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R01 www.clare.com 3 CPC1394 PERFORMANCE DATA* Typical Turn-On vs. LED Forward Current (TA=25ºC, IL=70mA) Typical Turn-Off vs. LED Forward Current (TA=25ºC, IL=70mA) 5 Turn-On Time (ms) 4 3 2 1 0 0 0.55 0.53 Turn-Off (ms) 0.51 0.49 0.47 0.45 35 On-Resistance (Ω) Typical On-Resistance vs. Temperature (IL=70mA, IF=2mA) 30 25 20 10 20 30 LED Current (mA) 40 50 0 10 20 30 LED Current (mA) 40 50 15 -40 -20 0 20 40 60 Temperature (ºC) 80 100 1.4 Forward Current (mA) 1.2 Typical IF for Switch Operation vs. Temperature (IL=70mA) 0.15 0.10 Load Current (A) 0.05 0.00 -0.05 -0.10 -0.15 Typical Load Current vs. Load Voltage (IF=2mA) Energy Rating Curve 1.0 0.8 0.6 0.4 0.2 0.0 10μs 100μs 1ms 10ms 100ms Time 1.0 0.8 0.6 0.4 0.2 -40 -20 0 20 40 60 LED Forward Voltage (V) 80 100 -4 -3 -2 -1 0 1 Load Voltage (V) 2 3 4 Load Current (A) 1s 10s 100s *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com R01 CPC1394 Manufacturing Information Soldering For proper assembly, the component must be processed in accordance with the current revision of IPC/JEDEC standard J-STD-020. Failure to follow the recommended guidelines may cause permanent damage to the device resulting in impaired performance and/or a reduced lifetime expectancy. Washing Clare does not recommend ultrasonic cleaning or the use of chlorinated solvents. Pb RoHS 2002/95/EC e3 MECHANICAL DIMENSIONS 4-Pin DIP (”G” Suffix) 0.991 (0.039) 6.350 ± 0.127 (0.250 ± 0.005) 3.30 ± 0.050 (0.130 ± 0.002) 0.254 (0.010) PC Board Pattern (Top View) 6 - 0.800 DIA. (6 - 0.031 DIA.) 2.540 ± 0.127 (0.100 ± 0.005) 7.620 ± 0.127 (0.300 ± 0.005) PIN 1 4.572 ± 0.127 (0.180 ± 0.005) 9º (ALL) 0.457 ± 0.076 (0.018 ± 0.003) 2.540 ± 0.127 (0.100 ± 0.005) 9º (ALL) 1.651 (0.065) 0.508 (0.020) 3.175 (0.125) 9.144 ± 0.508 (0.360 ± 0.020) 7.620 ± 0.254 (0.300 ± 0.010) 6.350 ± 0.127 (0.250 ± 0.005) Dimensions mm (inches) 4-Pin DIP “GV” Package 0.254 (0.010) 0.991 (0.039) 3.30 ± 0.050 (0.130 ± 0.002) 10.160 ± 0.508 (0.400 ± 0.020) PC Board Pattern (Top View) 6 - 0.800 DIA. (6 - 0.031 DIA.) 2.540 ± 0.127 (0.100 ± 0.005) 6.350 ± 0.050 (0.250 ± 0.002) 6.350 ± 0.127 (0.250 ± 0.005) 7.620 ± 0.254 (0.300 ± 0.010) 10.160 ± 0.127 (0.400 ± 0.005) 4.572 ± 0.050 (0.180 ± 0.002) 9º (ALL) 0.457 ± 0.076 (0.018 ± 0.003) 2.540 ± 0.050 (0.100 ± 0.002) Pin 1 9º (ALL) 1.651 (0.065) 0.127 (0.005) 2.92 (0.115) Dimensions mm (inches) R01 www.clare.com 5 CPC1394 MECHANICAL DIMENSIONS 4-Pin Surface Mount (”GR” Suffix) 2.540 ± 0.127 (0.100 ± 0.005) 3.300 ± 0.050 (0.130 ± 0.002) 0.635 ± 0.254 (0.025 ± 0.010) 6.350 ± 0.127 (0.250 ± 0.005) 9.525 (0.375) 7.620 ± 0.254 (0.300 ± 0.010) 2.287 (0.09) Recommended PCB Land Pattern 8.80 (0.346) 1.60 (0.063) PIN #1 0.991 (0.039) 9º ± 1º (ALL) 2.540 ± 0.127 (0.100 ± 0.005) 2.287 ± 0.127 (0.090 ± 0.005) 0.102 min / 0.254 max (0.004 min / 0.010 max) 4.572 ± 0.127 (0.180 ± 0.005) 3.480 ± 0.076 (0.137 ± 0.003) 0.254 (0.010) 0.95 (0.037) Dimensions mm (inches) Tape and Reel Packaging for 4-Pin Surface Mount Package 330.2 Dia (13.00 Dia) Top Cover Tape Thickness 0.102 Max (0.004 Max) W = 16.00 (0.630) K0 = 4.20 (0.165) K1 = 3.70 (0.146) P = 12.00 (0.472) A0 = 10.01 (0.394) B0 = 5.00 (0.197) Dimensions mm (inches) Embossed Carrier Embossment NOTE: Tape dimensions not shown comply with JEDEC Standard EIA-481-2 For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-CPC1394-R01 ©Copyright 2009, Clare, Inc. All rights reserved. Printed in USA. 3/9/09 6