CPC1510

1-Form-A Solid State Relay with Integrated Current Limit Description The CPC1510 is a 1-Form-A normally open Solid State Relay with an integrated current limit feature that can replace electromechanical relays while enhancing the robustness of wireline-interface applications. The relay is constructed using a GaAIAs LED for actuation control and an integrated monolithic die for the switch output. The die, fabricated in a high-voltage dielectrically isolated technology, is comprised of a photodiode array, switch control with active current limiting circuitry, and MOSFET switches. The active current limit circuitry in the CPC1510 also provides a thermal shutdown feature offering excellent power cross immunity for improved survivability in harsh environments. These enhancements greatly improves the robustness of end systems using this device compared to systems using relays without the integrated current limit. In addition, the active current limit circuitry enables the CPC1510 to pass FCC 68.302 and other regulatory voltage surge requirements when adequate overvoltage protection is provided. The CPC1510 relay may be used in both unidirectional DC applications as well as bi-directional AC applications. CPC1510 Parameter Blocking Voltage Load Current Max RON Rating 250 200 15 Units VP mA Ω Features • • • • • • • • • Integrated Active Current-Limit Protection Thermal Shutdown Linear AC or DC Operation Low Power Consumption Clean, Bounce-free Switching High Surge Capability Low Power Drive Requirements Surface Mount version available Tape & Reel packaging available Applications • General Telecom Switching • Hook Switch • Ringing Relay • Dial Pulsing • Ground Start • Ground Fault Protection • Instrumentation • Automatic Tuning/Balancing • Flying Capacitor • Analog Multiplex • Peripherals • Automatic Tuning/Balancing • Transducer Driver • Security • Medical Equipment Approvals • UL - File # E76270 Ordering Information Part # CPC1510G Description 6 Pin 0.250" Wide, Through Hole (50/Tube) 6 Pin 0.250" Wide, Surface Mount (50/Tube) 6 Pin 0.250" Wide, Surface Mount (1000/Reel) Pin Configuration CPC1510 Pinout AC/DC Configuration 1 2 3 6 5 4 CPC1510GS CPC1510GSTR CPC1510 Pinout DC Only Configuration 1 2 3 6 5 4 + Control – Control Do Not Use Load Do Not Use Load + Control – Control Do Not Use + Load – Load Switching Characteristics of Normally Open (Form A) Devices 10ms CONTROL + 90% LOAD 10% + TON 10%+ TOFF DS-CPC1510-R01 www.clare.com 1 CPC1510 Absolute Maximum Ratings Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation 1 Ratings 250 5 50 1 150 800 3750 -40 to +85 -40 to +125 Units VP V mA A mW mW Vrms °C °C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Total Power Dissipation 2 Isolation Voltage Input to Output Operational Temperature Storage Temperature 1 2 Derate Linearly 1.33 mW/˚C Derate Linearly 1.67 mW/˚C Electrical absolute maximum ratings are at 25°C Electrical Characteristics Parameter Output Characteristics @ 25°C Current Limit AC/DC Configuration DC Configuration On-Resistance AC/DC Configuration DC Configuration Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics @ 25°C Input Control Current Input Dropout Current LED Forward Voltage Common Characteristics @ 25°C Input to Output Capacitance IL=100mA IL=100mA IF=10mA IF IF VF CI/O 5 0.2 1.15 1.29 3 1.45 mA mA V pF IF=5mA, IL=100mA IF=0mA, VL=1.0V IF=0mA, VL=50V TON TOFF CO 0.30 0.16 2 ms pF IF=5mA, IL=100mA VL=200V RON ILEAK 6 1.5 11 2.8 0.02 15 3.75 1 Ω µA IF=5mA, VL=±5V, t=5ms ILMT 300 600 366 700 450 920 mA Conditions Symbol Min Typ Max Units 2 www.clare.com R01 CPC1510 PERFORMANCE DATA* CPC1510 Typical LED Forward Voltage Drop (N=50 Ambient Temperature = 25ºC) IF = 5mADC CPC1510 Typical On-Resistance Distribution (N=50 Ambient Temperature = 25ºC) (Load Current = 100mADC; IF = 5mADC) Device Count (N) 35 30 Device Count (N) 25 20 15 10 5 0 35 30 Device Count (N) 25 20 15 10 5 25 20 15 10 5 0 CPC1510 Typical IF for Switch Operation (N=50 Ambient Temperature = 25ºC) (Load Current = 100mADC) 1.17 1.19 1.21 1.23 1.25 0 8 9 10 11 12 13 0.75 1.05 1.35 1.65 1.95 2.25 LED Forward Voltage Drop (V) On-Resistance (Ω) LED Current (mA) 25 20 CPC1510 Typical IF for Switch Dropout (N=50 Ambient Temperature = 25ºC) 25 CPC1510 Typical Turn-On Time (N=50 Ambient Temperature = 25ºC) (Load Current = 100mADC; IF = 5mADC) 25 20 15 10 5 0 CPC1510 Typical Turn-Off Time (N=50 Ambient Temperature = 25ºC) (Load Current = 100mADC; IF = 5mADC) Device Count (N) Device Count (N) 15 10 5 0 15 10 5 0 0.75 1.05 1.35 1.65 1.95 2.25 LED Current (mA) 0.23 0.26 0.29 0.32 0.35 0.38 Device Count (N) 20 0.12 0.17 0.22 0.27 0.32 0.37 Turn-On (ms) Turn-Off (ms) CPC1510 Typical Load Current vs. Temperature (N=50 Anbient Temperature = 25ºC) 600 Load Current (mA) 500 400 300 200 100 0 -40 -20 0 20 40 60 80 100 120 0.035 CPC1510 Typical Leakage vs. Temperature (Measured across Pins 4 & 6) 0.6 0.5 Turn-On (ms) 0.4 0.3 0.2 0.1 0 CPC1510 Typical Turn-On vs. Temperature (Load Current = 100mADC) DC Configuration Leakage (µA) 0.030 AC/DC Configuration IF = 10mA IF = 5mA IF = 10mA IF = 5mA 0.025 0.020 0.015 0.010 0.005 0 -40 -20 0 20 40 60 80 100 IF = 5mA IF = 10mA -40 -20 0 20 40 60 80 100 120 Temperature (ºC) Temperature (ºC) Temperature (ºC) LED Forward Voltage Drop (V) 0.35 0.30 Turn-Off (ms) 0.25 0.20 0.15 0.10 0.05 0 -40 CPC1510 Typical Turn-Off vs. Temperature (Load Current = 100mADC) 1.8 1.6 CPC1510 Typical LED Forward Voltage Drop vs. Temperature 0.40 0.35 Turn-On (ms) 0.30 0.25 0.20 0.15 0.10 0.05 0.00 CPC1510 Typical Turn-On vs.LED Forward Current (Load Current = 100mADC) 1.4 1.2 1.0 0.8 IF = 5mA IF = 50mA IF = 10mA IF = 5mA -20 0 20 40 60 80 100 -20 0 20 40 60 80 100 120 0 5 10 15 20 25 30 35 40 45 50 Temperature (ºC) Temperature (ºC) Forward Current (mA) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R01 www.clare.com 3 CPC1510 PERFORMANCE DATA* CPC1510 Typical Turn-Off vs. LED Forward Current (Load Current = 100mADC) CPC1510 Typical On-Resistance vs. Temperature (Load Current = Max rated at Temp.) AC/DC Configuration IF = 5mA 0.12 0.10 25 On-Resistance (Ω) 20 15 10 5 0 6 On-Resistance (Ω) 5 4 3 2 1 0 CPC1510 Typical On-Resistance vs. Temperature (Load Current = Max rated at Temp.) DC Configuration IF = 5mA Turn-Off (ms) 0.08 0.06 0.04 0.02 0 0 5 10 15 20 25 30 35 40 45 50 IF = 10mA IF = 10mA -40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100 LED Forward Current (mA) Temperature (ºC) Temperature (ºC) 3.0 2.5 LED Current (mA) CPC1510 Typical IF for Switch Operation vs. Temperature (Load Current = 100mADC) 3.0 2.5 LED Current (mA) 2.0 1.5 1.0 0.5 CPC1510 Typical IF for Switch Dropout vs. Temperature (Load Current = 100mADC) Load Current (mA) 150 100 50 0 -50 -100 CPC1510 Typical Load Current vs. Load Voltage (Ambient Temperature = 25ºC) IF = 5mADC 2.0 1.5 1.0 0.5 0 -40 -20 0 20 40 60 80 100 0 -40 -20 0 20 40 60 80 100 -150 -2.5 -2.0 -1.5 -1.0 -0.5 0 0.5 1.0 1.5 2.0 2.5 Temperature (ºC) Temperature (ºC) Load Voltage (V) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com R01 Manufacturing Information Soldering Recommended soldering processes are limited to 245ºC component body temperature for 10 seconds. Washing Clare does not recommend ultrasonic cleaning or the use of chlorinated solvents. MECHANICAL DIMENSIONS 6 Pin Through Hole (G) 7.620 ± 0.254 (0.300 ± 0.010) 3.302 ± 0.051 (0.130 ± 0.002) 8.382 ± 0.381 (0.330 ± 0.015) PC Board Pattern (Top View) 2.540 ± 0.127 6-0.800 DIA. (0.100 ± 0.005) (6-0.031 DIA.) 7.620 ± 0.127 (0.300 ± 0.005) 7.239 TYP (0.285 TYP) 6.350 ± 0.127 (0.250 ± 0.005) 6.350 ± 0.127 (0.250 ± 0.005) 0.254 TYP (0.010 TYP) 9.144 ± 0.508 (0.360 ± 0.020) 2.540 ± 0.127 (0.100 ± 0.005) 5.080 ± 0.127 (0.200 ± 0.005) 6 Pin Surface Mount (“GS” Suffix) 7.620 ± 0.254 (0.300 ± 0.010) 3.302 ± 0.051 (0.130 ± 0.002) 0.254 ± 0.0127 (0.010 ± 0.0005) 4.445 ± 0.127 (0.175 ± 0.005) 0.635 ± 0.127 (0.025 ± 0.005) 8.382 ± 0.381 (0.330 ± 0.015) 2.540 ± 0.127 (0.100 ± 0.005) 9.525 ± 0.254 (0.375 ± 0.010) 6.350 ± 0.127 (0.250 ± 0.005) PC Board Pattern (Top View) 2.540 ± 0.127 (0.100 ± 0.005) 8.305 ± 0.127 (0.327 ± 0.005) 1.905 ± 0.127 (0.075 ± 0.005) 1.499 ± 0.127 (0.059 ± 0.005) 0.457 ± 0.076 (0.018 ± 0.003) Tape and Reel Packaging for Surface Mount Package 330.2 DIA. (13.00 DIA.) Top Cover Tape Thickness 0.102 MAX. (0.004 MAX.) W = 16.30 MAX (0.642 MAX) B0 = 10.10 (0.398) Top Cover Tape Embossment Carrier K1 = 3.80 (0.150) K0 = 4.90 (0.193) P = 12.00 (0.472) A0 = 10.10 (0.398) Embossment User Direction of Feed Dimensions mm (inches) For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. 5 Specification: DS-CPC1510-R01 ©Copyright 2005, Clare, Inc. OptoMOS® is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 10/31/05