CPC1906Y

Power SIP Relay Power SIP Relay CPC1906Y Blocking Voltage Load Current On-Resistance CPC1906Y 60 2 0.3 Units V Arms Ω Description Clare and IXYS have combined to bring OptoMOS® technology, reliability and compact size to a new family of high power solid state relays. As part of that family, the CPC1906Y is a 1-Form-A solid state relay. The CPC1906Y employs optically coupled MOSFET technology to provide 2500Vrms of input to output isolation. The efficient MOSFET switches and photovoltaic die use Clare’s patented OptoMOS architecture while the input is controlled by a highly efficient GaAlAs infrared LED. The combination of low on resistance and high load current handling capabilities makes the relay suitable for a variety of high performance switching applications. Features • • • • • • • • • Power SIP Package Handle Load Currents Up to 2Arms High Reliability No Moving Parts Low Drive Power Requirements (TTL/CMOS Compatible) Arc-Free With No Snubbing Circuits 2500Vrms Input/Output Isolation No EMI/RFI Generation Machine Insertable, Wave Solderable Approvals • UL recognized component: File # E69938 • Certified to: UL 508 Applications Industrial Controls Motor Control Robotics Medical Equipment—Patient/Equipment Isolation Instrumentation • Multiplexers • Data Acquisition • Electronic Switching • I/O Subsystems • Meters (Watt-Hour, Water, Gas) • IC Equipment • Home Appliances • • • • • Ordering Information Part # CPC1906Y Description Power SIP Package (25 per tube) Pin Configuration CPC1906Y Pinout Switching Characteristics of Normally Open (Form A) Devices DS-CPC1906Y-R03 www.clare.com 1 CPC1906Y Absolute Maximum Ratings (@ 25˚ C) Parameter Blocking Voltage Reverse Input Voltage Input control Current Peak (10ms) Input Power Dissipation1 Isolation voltage Input to Output Operational Temperature Storage Temperature 1 Ratings 60 5 50 1 150 2500 -40 to +85 -40 to +125 Units V V mA A mW Vrms °C °C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Derate Linearly 3.33 mw / ºC Electrical Characteristics Parameter Output Characteristics @ 25°C Load Current, Continuous Peak Load Current On-Resistance1 Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics @ 25°C Input Control Current Input Dropout Current Input Voltage Drop Reverse Input Current Input/Output Characteristics @ 25°C Capacitance Input/Output 1 Conditions free air T=10ms IL=1A VL=60V IF=10mA, VL=10V IF=10mA, VL=10V 50V, f=1MHz IL=1A IF=5mA VR=5V f=1MHz Symbol IL ILPK RON ILEAK TON TOFF COUT IF IF VF IR II/O Min 10 0.6 0.9 - Typ 0.105 3.5 0.04 130 1.2 2 Max 2 9 0.3 1 10 5 1.4 10 - Units Arms Arms Ω µA ms ms pF mA mA V µA pF Measurement taken within 1 second of on time. Thermal Characteristics Parameter Thermal Resistance (junction to case) Conditions Symbol RθJC Min Typ 1.5 Max Units °C/W 2 www.clare.com R03 CPC1906Y PERFORMANCE DATA* CPC1906Y DC CPC1906Y DC DC 35 30 Device Count (N) 25 20 15 10 5 0 0.103 0.104 0.105 0.106 0.107 0.108 66 67 CPC1906Y 35 30 Device Count (N) 25 20 15 10 5 0 1.17 1.19 1.21 35 30 Device Count (N) 25 20 15 10 5 1.23 1.25 0 68 69 70 71 LED Forward Voltage (V) Blocking Voltage (V) CPC1906Y Typical Load Current vs. Temperature 25 20 15 10 5 0 DC DC 25 20 15 10 5 0 DC DC Load Current (Arms) 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 0.033 0.033 0.037 0.042 0.046 0.050 -40 -20 0 20 40 60 80 Device Count (N) Device Count (N) IF = 10mA IF = 5mA 100 120 2.5 3.0 3.5 4.0 4.5 5.0 Turn-On (ms) Turn-Off (ms) 0.035 0.030 0.025 0.020 0.015 0.010 0.005 0 CPC1906Y Typical Leakage vs. Temperature at Maximum Rated Voltage (Measured across Pins 3 & 4) Blocking Voltage (V) CPC1906Y Blocking Voltage vs. Temperature 72 71 69 68 67 66 65 64 -40 -20 0 20 40 60 80 100 -40 Turn-On (ms) 70 CPC1906Y Typical Turn-On vs. Temperature (Load Current = 100 mADC) IF = 10mA -40 -20 0 20 40 60 80 100 -20 0 20 40 60 80 100 0.60 Turn-Off (ms) 0.50 0.40 0.30 0.20 0.10 0 -40 -20 0 20 40 60 80 100 IF = 10mA LED Forward Voltage Drop (V) 0.70 CPC1906Y Typical Turn-Off vs. Temperature (Load Current = 100 mADC) 1.8 1.6 1.4 1.2 1.0 0.8 CPC1906Y Typical LED Forward Voltage Drop vs. Temperature IF = 50mA IF = 20mA IF = 10mA 4.0 3.6 3.2 2.8 2.4 2.0 1.6 1.2 0.8 0.4 0 CPC1906Y Typical Turn-On vs.LED Forward Current (Load Current = 100 mADC) Turn-On (ms) -40 -20 0 20 40 60 80 100 120 0 5 10 15 20 25 30 35 40 45 50 LED Forward Current (mA) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R03 www.clare.com 3 CPC1906Y PERFORMANCE DATA* CPC1906Y Typical Turn-Off vs. LED Forward Current (Load Current = 100 mADC) CPC1906Y Typical On-Resistance vs. Temperature (Load Current = 100 mADC) IF = 5mA LED Current (mA) 10.0 9.0 8.0 7.0 6.0 5.0 4.0 3.0 2.0 1.0 0 0.09 0.08 0.07 Turn-Off (ms) 0.06 0.05 0.04 0.03 0.02 0.01 0 CPC1906Y Typical IF for Switch Operation vs. Temperature (Load Current = 100 mADC) IF = 10mA 0 5 10 15 20 25 30 35 40 45 50 -40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100 LED Forward Current (mA) CPC1906Y DC Load Current (Arms) 16 14 12 10 8 6 4 2 0 -0.267 -0.133 0 0.133 0.267 0.4 CPC1906Y Energy Rating Curve (Free air, no heat sink) 3.75 3.00 2.25 1.50 0.75 0.00 -0.75 -1.50 -2.25 -3.00 -3.75 -0.4 Load Current (A) 1ms 10ms 100ms Time 1s 10s 100s Load Voltage (V) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com R03 Manufacturing Information Soldering Recommended soldering processes are limited to 245ºC component body temperature for 10 seconds. Washing Clare does not recommend ultrasonic cleaning or the use of chlorinated solvents. MECHANICAL DIMENSIONS PIN 1 0.070 (1.778) PIN 4 Dimensions: inches (mm) For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-CPC1906Y-R03 ©Copyright 2005, Clare, Inc. OptoMOS® is a registered trademark of Clare, Inc. registered trademark of Clare, Inc. All rights reserved. Printed in USA. 5/26/05