CPC1961

CPC1961 AC Solid State Relay Parameters Blocking Voltage AC Operating Voltage Load Current 1 On State Voltage Drop 1 Ratings 600 260 250 3 Units VP Vrms mArms Vrms (at IL = 250mArms) Description The CPC1961 is a dual pole AC solid state switch that uses optical coupling with dual monolithic SCR outputs to produce an alternative to optocoupler and triac circuits. The CPC1961 switches are robust enough to provide a blocking voltage of up to 600V. In addition, tightly controlled zero cross circuitry ensures switching of AC loads without the generation of transients. The input and output circuits are optically coupled to provide 3750Vrms of isolation and noise immunity between control and load circuits. As a result the CPC1961 is well suited for industrial environments where electromagnetic interference would disrupt the operation of electromechanical relays. The CPC1961 is offered in a space saving 8 pin DIP package with two independent switches. One Pole Operating Features • • • • • • • • • • • Load Current up to 250 mArms 600VP Blocking Voltage 5mA Sensitivity Zero-Crossing Detection DC Control, AC Output Optically Isolated TTL and CMOS Compatible Low EMI and RFI Generation High Noise Immunity Machine Insertable, Wave Solderable Flammability classification rating of V-0 Approvals • UL Recognized Component: File # 69938 • CSA Certified Component: Certificate # 1172007 Applications • • • • • • • • • • Programmable Control Process Control Power Control Panels Remote Switching Gas Pump Electronics Contactors Large Relays Solenoids Motors Heaters Ordering Information Part # CPC1961G CPC1961GS CPC1961GSTR Description 8-Pin Dip (50/Tube) 8-Pin Surface Mount (50/Tube) 8-Pin Surface Mount (1000/Reel) Pin Configuration + LED 1 ZC – LED 2 8 AC Load 7 AC Load + LED 3 ZC – LED 4 6 AC Load 5 AC Load Pb RoHS 2002/95/EC e3 www.clare.com 1 DS-CPC1961-R05 CPC1961 Absolute Maximum Ratings Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation 1 Total Package Dissipation 2 Isolation Voltage Input to Output Operational Temperature Storage Temperature 1 Derate Linearly 1.33 mW/˚C 2 Derate Linearly 6.67 mW/˚C Ratings Units 600 VP 5 VP 50 mA 1 A 150 mW 800 mW 3750 Vrms -40 to +85 °C -40 to +125 °C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Electrical absolute maximum ratings are at 25°C Electrical Characteristics Parameters Output Characteristics @ 25°C Operating Voltage Range Load Current 1, Continuous Non-repetitive Single Cycle Surge Current Off State Leakage Current On-State Voltage Drop Critical Rate of Rise 2 Holding Current Switching Speeds Turn-on Turn-off Zero-Cross Turn-On Voltage Operating Frequency 3 Load Power Factor for Guaranteed Turn-On 4 Input Characteristics @ 25°C Input Control Current 5 Input Voltage Drop Input Drop-out Voltage Reverse Input Current Common Characteristics @ 25°C Input to Output Capacitance 1 Conditions VL VL=120-240Vrms t < 10ms VL=600V IL=250 mArms IF=5 mA Symbol IL ITSM ILEAK dv/dt IH tON tOFF PF IF VF IR CI/O Min 20 0.005 500 20 0.25 0.9 0.8 - Typ 300 5 1.2 1.2 3 Max 260 250 1 1 3 0.5 0.5 20 5 500 5 1.4 10 - Units Vrms mArms A µA Vrms V/µs µA IF=5 mA 1st half cycle Subsequent half cycles IF=5mA VR=5V - cycles V V Hz mA V V µA pF Maximum continuous load current of a single pole or the sum of the load currents with both poles operating simultaneously. 2 Tested in accordance with EIA/NARM standard RS-443. 3 Zero Cross 1st half cycle @